P. Shiv Raj; G. Devendar; A. Chennakesava Reddy, OPTIMIZATION OF PROCESS PARAMETERS IN DEEP DRAWING OF MONEL-400 CONICAL CUP, International Journal of Mechanical Engineering, ISBN No.2319-2259, Vol No.10, Issue No.1, pp.11-20, December, 2020

 Suthraye Sai Gaurav; G. Devendar; A. Chennakesava Reddy, OPTIMIZATION OF PROCESS PARAMETERS BY WARM DEEP DRAWING OF CYLINDRICAL CUP OF NICKEL 201, International Journal of Mechanical Engineering, ISBN No.2319-2259, Vol No.10, Issue No.1, pp.1-10, December, 2020

 J.Nithin Sai; G. Devendar; A. Chennakesava Reddy, Parametric Optimization of NI201 Deep Drawn Conical Cups, International Journal of Material Sciences and Technology, ISBN No.2249-3077, Vol No.10, Issue No.2, pp.81-93, December, 2020

 K.Bargavi; G. Devendar; A. Chennakesava Reddy, Optimization of Process Parameters of Deep Drawing Process for Inconel-600 Conical Cups, International Journal of Materials Science, ISBN No.0973-4589, Vol No.15, Issue No.2, pp.97-109, December, 2020

 S. Nirupam; G. Devendar; A. Chennakesava Reddy, PARAMATER OPTIMISATION FOR WARM DEEP DRAWING OF INCONEL-600 CYINDRICAL CUP, International Journal of Mechanical and Production Engineering, ISBN No.2321-2071, Vol No.8, Issue No.9, pp.43-49, December, 2020

 K. Siva Kumar; A. Chennakesava Reddy, Investigation on mechanical properties and wear performance of Nylon-6/Boron Nitride polymer composites by using Taguchi Technique, Results in Materials, ISBN No.2590-048X, Issue No.5, pp.1-5, 2020

 T. Prasad; A. Chennakesava Reddy, Strengthening Mechanisms in Al-Alloy/Carbon Black Nanocomposites, International Journal of Materials Science, ISBN No.0973-4589, Vol No.14, Issue No.1, pp.19-36, 2020

 A. Chennakesava Reddy, Immunity: A Strong Defense against Corona Virus, International Journal of Science and Research, ISBN No.2319-7064, Vol No.9, Issue No.7, pp.127-137, 2020

 K. Shiva Kumar; A. Chennakesava Reddy , Mechanical and Tribological Behavior of Particulate Filled Silicon Nitride Reinforced Nylon-6 Polymer Composites, International Journal of Engineering and Advanced Technology, ISBN No.2249 – 8958, Vol No.8, Issue No.6, pp.3951-3955, August, 2019

 K. Siva Kumar; A. Chennakesava Reddy, MECHANICAL AND WEAR BEHAVIOR OF ABS/BN POLYMER COMPOSITES, International Journal of Engineering Science and Technology, ISBN No.0975-5462, Vol No.10, Issue No.5, pp.172-180, 2019

 K. SHIVA KUMAR, A. CHENNAKESAVA REDDY, MECHANICAL AND WEAR BEHAVIOR OF ABS/BN POLYMER COMPOSITES, International Journal of Engineering Science and Technology, ISBN No. 0975-5462, Vol No.10, Issue No.5, pp.172-180, IJEST, May, 2018

 P. Kamesh, A. Chennakesava Reddy, Micromechanical Plastic Behavior of AA5454 Alloy used for Fabrication of Pyramidal Cups, International Journal of Science and Research, ISBN No.2319-7064, Vol No.7, Issue No.6, pp.1225-1230, IJSR, June, 2018

 M. Jaswanth Krishna, A. Chennakesava Reddy, Evaluation of Process Parameters of Conical Cups in Incremental Deep Drawing Process, International Journal of Science and Research, ISBN No.2319-7064, Vol No.7, Issue No.6, pp.1345-1350, IJSR, June, 2018

 Teniya Choppala, A. Chennakesava Reddy, Elastoplastic Behavior of AA2124 Alloy used to make Hemispherical Cups, International Journal of Science and Research, ISBN No.2319-7064, Vol No.7, Issue No.6, pp.1295-1300, IJSR, June, 2018

 A. Chennakesava Reddy, Formability Analysis of 6063 Al Alloy for Deep Drawn Cylindrical Cups with Constant and Progressive Blank Holding Force, SSRG International Journal of Mechanical Engineering, ISBN No.2348-8360, Vol No.4, Issue No.5, pp.26-32, May, 2017

 ShashankChagalamarri, G. Devendar, A. Chennakesava Reddy, ASSESSMENT OF STRAIN AND STRESS – BASED FORMABILITY DIAGRAMS OF INCONEL 600 HEMISPHERICAL CUPS DRAWN BY SINGLE POINT INCREMENTAL FORMING PROCESS USING ABAQUS, International Journal of Advanced Technology in Engineering and Science, ISBN No.2348-7550, Vol No.5, Issue No.5, pp.710-719, May, 2017

 B. Sumanth Kumar, G. Devendar, A. Chennakesava Reddy, FORMABILITY ANALYSIS OF PARABOLIC CUPS DRAWN FROM Ni 201 USINGSINGLE POINT INCREMENTAL FORMING PROCESS, International Journal of Engineering Sciences & Research Technology, ISBN No.2277-9655, Vol No.6, Issue No.5, pp.619-628, May, 2017

 B.Abhijith, A. Chennakesava Reddy, Effect of Inter Layer on Penetration, Sliding and Sticking Characteristics in Rotary Friction Welding of Inconel 600 and SS 304 Dissimilar Materials, International Journal of Engineering Inventions, ISBN No.2278-7461, Vol No.6, Issue No.5, pp.32-39, May, 2017

 A. Chennakesava Reddy , Numerical and Experimental Investigation of Single Point Incremental Forming Process for Phosphorus Bronze Hemispherical Cups, International Journal of Scientific & Engineering Research, ISBN No.2229-5518, Vol No.8, Issue No.1, pp.957-963, IJSER, January, 2017

 A. Chennakesava Reddy, Evaluation of Single Point Incremental Forming Process for Parabolic AA6082 Cups, International Journal of Scientific & Engineering Research, ISBN No.2229-5518, Vol No.8, Issue No.1, pp.964-970, IJSER, January, 2017

 A. Chennakesava Reddy, Experimental and Numerical Studies on Formability of Stainless Steel 304 in Incremental Sheet Metal Forming of Elliptical Cups, International Journal of Scientific & Engineering Research, ISBN No.2229-5518, Vol No.8, Issue No.1, pp.971-976, IJSER, January, 2017

 A. Chennakesava Reddy, Pilot Studies on Single Point Incremental Forming Process for Hyperbolic Brass Cups, International Journal of Scientific & Engineering Research, ISBN No.2229-5518, Vol No.8, Issue No.1, pp.977-982, IJSER, January, 2017

 A. Chennakesava Reddy, Temperature and Anisotropy Induced Micromechanics for Negative Poisson’s Ratio h-BN/5050 Al Alloy Composites, International Journal of Engineering and Technology , ISBN No.0975-4024, Vol No.9, Issue No.4, pp.2846-2853, August, 2017

 A. Chennakesava Reddy, Low and High Temperature Micromechanical Behavior of BN/3003 Aluminum Alloy Nanocomposites, International Journal of Mechanical Engineering and Technology, ISBN No.2319-2240, Vol No.6, Issue No.4, pp.27-34, July, 2017

 A. Chennakesava Reddy, Formability of 5083 Al Alloy Hemi-Spherical Shells Using Hot Deep Drawing Process, International Journal of Mechanics and Solids, ISBN No.0973-1881, Vol No.9, Issue No.3, pp.257-266, August, 2017

 A. Chennakesava Reddy, Evaluation of Formability Limit Diagrams of Arsenic Brass (70/30) Using Finite Element Analysis, International Journal of Mechanical Engineering and Information Technology, ISBN No.2348-196x, Vol No.5, Issue No.6, pp.1651-1656, June, 2017

 A. Chennakesava Reddy, Impact of High Temperature and Beta-Phase on Formability of Cylindrical Cups from Cu-28%Zn and Cu-37%Zn Alloys, International Journal of Material Sciences and Technology, ISBN No.2249-3077, Vol No.7, Issue No.1, pp.17-26, August, 2017

 T. Prasad; A. Chennakesava Reddy, Effects of Carbon Black Nanoparticles on Wear Resistance of AA6063/CB Metal Matrix Composites, International Journal of Materials Science, ISBN No.0973-4589, Vol No.12, Issue No.1, pp.87-95, IJoMS, March, 2017

 T. Prasad; A. Chennakesava Reddy, SLIDING WEAR OF AA6061/CARBON BLACK METAL MATRIX COMPOSITES, International Journal of Mechanical Engineering and Technology, ISBN No.0976-6359, Vol No.8, Issue No.2, pp.203-209, February, 2017

 A. Chennakesava Reddy, Consequences of Magnesium in 5050 Aluminum Alloy on Wettability, Strengthening Mechanisms and Fracture Behavior of Silicon Carbide Nanoparticle Metal Matrix Composites, International Journal of Research in Mechanical engineering & Technology , ISBN No.2249-5762, Vol No.7, Issue No.1, pp.89-96, IJRMET, April, 2017

 T. Prasad; A. Chennakesava Reddy, Effects of Carbon Black Nanoparticles on Wear Resistance of A7020/Carbon Black Metal Matrix Composites, American Journal of Materials Science, ISBN No.2162-8424, Vol No.7, Issue No.3, pp.47-52, May, 2017

 A. Chennakesava Reddy, Effect of Recrystallization Temperature on Formability of Hot Deep Drawn Cylindrical Cups from 6082 Al Alloy, Indian Journal of Engineering, ISBN No.2319-7765, Vol No.14, Issue No.36, pp.157-166, Discovery Publication, April, 2017

 Chennakesava R Alavala, EFFECT OF TEMPERATURE, STRAIN RATE AND COEFFICIENT OF FRICTION ON DEEP DRAWING PROCESS OF 6061 ALUMINUM ALLOY, International Journal of Mechanical Engineering, ISBN No.2319-2259, Vol No.5, Issue No.6, pp.11-23, IASET, October, 2016

 Chennakesava R Alavala, Tribological Investigation of the Effects of Particle Volume Fraction, Applied Load and Sliding Distance on AA4015/Titania Nanocomposites, IPASJ International Journal of Mechanical Engineering, ISBN No.2321-6441, Vol No.4, Issue No.10, pp.9-15, October, 2016

 Chennakesava R alavala, DEVELOPMENT OF HIGH TEMPERATURE AND HIGH STRAIN RATE SUPER PLASTIC DEEP DRAWING PROCESS FOR 5656 AL ALLOY CYLINDRICAL CUPS, International Journal of Mechanical And Production Engineering, ISBN No.2320-2092, Vol No.4, Issue No.10, pp.187, October, 2016

 Chennakesava R Alavala, Influence of Debris on Wear Rate of Metal Matrix Composites, Journal of Materials Science & Surface Engineering, ISBN No.2348-8956, Vol No.4, Issue No.6, pp.458-462, November, 2016

 K. Sai Santosh Kumar; A. Chennakesava Reddy, DIE LESS SINGLE POINT INCREMENTAL FORMING PROCESS OF AA6082 SHEET METAL TO DRAW PARABOLIC CUPS USING ABAQUS, International Journal of Advanced Technology in Engineering and Science, ISBN No.2348-7550, Vol No.4, Issue No.11, pp.127-134, IJATES, November, 2016

 T. Manohar Reddy; A. Chennakesava Reddy, NUMERICAL INVESTIGATIONS ON THE SINGLE POINT INCREMENTAL FORMING OF 60-40 BRASS TO FABRICATE HYPERBOLIC CUPS, International Journal of Advance Research in Science and Engineering, ISBN No.2319-8354, Vol No.5, Issue No.11, pp.161-170, IJARSE, November, 2016

 Chennakesava R Alavala, Thermal Expansion Behavior of Al/Magnesia Metal Matrix Composites, International Journal of Science and Research, ISBN No.2319-7064, Vol No.5, Issue No.8, pp.1817-1821, IJSR, August, 2016

 B. NAVYA SRI; A. CHENNAKESAVA REDDY, FORMABILITY OF ELLIPTICAL SS304 CUPS IN SINGLE POINT INCREMENTAL FORMING PROCESS BY FINITE ELEMENT METHOD, International Journal of Research in Engineering & Technology, ISBN No.2321-8843, Vol No.4, Issue No.11, pp.9-16, IMPACT, November, 2016

 G. Soujanya; A. Chennakesava Reddy, Analysis of SinglePoint IncrementalForming Process toFabricate Phosphorous Bronze Hemispherical Cups, International Journal of Innovative Science, Engineering & Technology, ISBN No.2348 – 7968, Vol No.3, Issue No.11, pp.139-144, IJISET, November, 2016

 A. Chennakesava Reddy; Naresh Baki, Application of CNC Electrical Discharge Turning for Aerospace Materials - A Review, International Journal of Science and Research, ISBN No.2319-7064, Vol No.5, Issue No.11, pp.1647-1653, IJSR, November, 2016

 V. Srija; A. Chennakesava Reddy, Single Point Incremental Forming of AA1050-H18 Alloy Frustum of Cone Cups, International Journal of Science and Research, ISBN No.2319-7064, Vol No.5, Issue No.6, pp.1138-1143, IJSR, June, 2016

  T. Santhosh Kumar; A. Chennakesava Reddy, Finite Element Analysis of Formability of Pyramid-al Cups Fabricated from AA1100-H18 Alloy, International Journal of Science and Research, ISBN No.2319-7064, Vol No.5, Issue No.6, pp.1172-1177, IJSR, June, 2016

 A. Raviteja; A. Chennakesava Reddy, Finite Element Analysis of Single Point Incremental Deep Drawing Process for Truncated Pyramidal Cups from AA 1070 Alloy, International Journal of Innovative Science, Engineering & Technology, ISBN No.2348-7968, Vol No.3, Issue No.6, pp.263-268, IJISET, June, 2016

 V. Srija; A. Chennakesava Reddy, NUMERICAL SIMULATION OF TRUNCATED PYRAMIDAL CUPS OF AA1050-H18 ALLOY FABRICATED BY SINGLE POINT INCREMENTAL FORMING, INTERNATIONAL JOURNAL OF ENGINEERING SCIENCES & RESEARCH TECHNOLOGY, ISBN No.2277-9655, Vol No.5, Issue No.6, pp.741-749, IJESRT, June, 2016

 K. Koundinya; A. Chennakesava Reddy, Interface Material for Enhancement of Weldability between Dissimilar Materials: 405 Ferritic Stainless Steel and 705 Zr Alloy by Friction Welding Process, International Journal of Science and Research, ISBN No.2319-7064, Vol No.5, Issue No.6, pp.1366-1370, IJSR, June, 2016

 T. Santhosh Kumar; A. Chennakesava Reddy, Single Point Incremental Forming And Significance Of Its Process Parameters On Formability Of Conical Cups Fabricated From Aa1100-H18 Alloy, International Journal of Engineering Inventions, ISBN No.2319-6491, Vol No.5, Issue No.6, pp.10-18, IJEI, June, 2016

 A. Raviteja; A. Chennakesava Reddy, IMPLICATION OF PROCESS PARAMETERS OF SINGLE POINT INCREMENTAL FORMING FOR CONICAL FRUSTUM CUPS FROM AA 1070 USING FEA, International Journal of Research in Engineering and Technology, ISBN No.2319-1163, Vol No.5, Issue No.6, pp.125-129, IJRET, June, 2016

 Chennakesava R Alavala, Nano-mechanical modeling of thermoelastic behavior of AA6061/silicon oxide nanoparticulate metal matrix composites, International Journal of Science and Research, ISBN No.2319-7064, Vol No.5, Issue No.1, pp.550-553, January, 2016

 Chennakesava R Alavala, Synthesis and Tribological Characterization of Cast AA1100-B4C Composites, International Journal of Science and Research, ISBN No.2319-7064, Vol No.5, Issue No.6, pp.2404-2407, IJSR, June, 2016

 Seelam Pitchi Reddy; A. Chennakesava Reddy, Tensile and Flexural Strength of OKRA Fiber Reinforced Polymer Composites, International Journal of Engineering and Management Research, ISBN No.2394-6962, Vol No.6, Issue No.1, pp.491-495, IJEMR, January, 2016

 M.Swaroopa, T. Kishen Kumar Reddy; A. Chennakesava Reddy; B.Majumdar, Synthesis and Tribological Characterization of Cast AA1100-B4C Composites 3D Numerical Simulation of 'Herringbone' Defective Ribbon formation in planar flow melt spinning process., International Journal of Scientific & Engineering Research, ISBN No.2229-5518, Vol No.7, Issue No.6, pp.17-21, IJSER, June, 2016

 T. Santhosh Kumar; V. Srija; A. Ravi Teja; A. Chennakesava Reddy, Influence of Process Parameters of Single Point incremental Deep Drawing Process for Truncated Pyramidal Cups from 304 Stainless Steel using FEA, International Journal of Scientific & Engineering Research, ISBN No.2229-5518, Vol No.7, Issue No.6, pp.100-105, IJSER, June, 2016

 A.Balaram Naik; A.Chennakesava Reddy, Experimental Analysis of TIG Welding and Comparison between Activated-TIG and TIG on Duplex Stainless Steel (2205), International Journal of Scientific & Engineering Research, ISBN No.2229-5518, Vol No.7, Issue No.6, pp.115-122, IJSER, June, 2016

 Devendar.G; A. Chennakesava Reddy, Study on Deep Drawing Process Parameters - A Review, International Journal of Scientific & Engineering Research, ISBN No.2229-5518, Vol No.7, Issue No.6, pp.149-155, IJSER, June, 2016

 K. Shiva Kumar; A. Chennakesava Reddy, Study on Reinforcement Materials for Nylon Matrix Composites - A Review, International Journal of Scientific & Engineering Research, ISBN No.2229-5518, Vol No.7, Issue No.6, pp.156-160, IJSER, June, 2016

 K. Koundinya; A. Chennakesava Reddy, Simulation of Joint Design on Weldability of Dissimilar Materials: 405 Ferritic Stainless Steel and 705 Zr Alloy by Friction Welding Process, International Journal of Scientific & Engineering Research, ISBN No.2229-5518, Vol No.7, Issue No.6, pp.261-265, IJSER, June, 2016

 Chennakesava R Alavala, Prediction Models for Sliding Wear of AA3003/Al2O3 Composites, International Journal of Engineering Research and Application, ISBN No.2248-9622, Vol No.6, Issue No.7, pp.20-24, IJERA, July, 2016

 Chennakesava R Alavala, Adhesive and Abrasive Wear Behavior of AA4015 Alloy/Si3N4 Metal Matrix Composites, Indian Journal of Engineering, ISBN No.2319–7765, Vol No.13, Issue No.34, pp.625-633, www.discoveryjournals.com, 2016

 Chennakesava R Alavala, FEM ANALYSIS OF SINGLE POINT INCREMENTAL FORMING PROCESS AND VALIDATION WITH GRID-BASED EXPERIMENTAL DEFORMATION ANALYSIS, International Journal of Mechanical Engineering, ISBN No.2319-2259, Vol No.5, Issue No.5, pp.1-6, IASET, August, 2016

 A. Chennakesava Reddy, Influence of Stiffeners on Strength of E-Glass/Epoxy Composite Submergible Hull Subjected to Shock Pressure Load using Finite Element Method, International Conference on Advancements in Materials for Manufacturing, Hyderabad, Elsevier, June, 2016

 Chennakesava R Alavala, VALIDATION OF SINGLE POINT INCREMENTAL FORMING PROCESS FOR DEEP DRAWN PYRAMIDAL CUPS USING EXPERIMENTAL GRID-BASED DEFORMATION, INTERNATIONAL JOURNAL OF ENGINEERING SCIENCES & RESEARCH TECHNOLOGY, ISBN No.2277-9655, Vol No.5, Issue No.8, pp.481-488, IJESRT, August, 2016

 Chennakesava R Alavala, WEIGHT LOSS FUNCTIONS FOR TOLERABLE WEAR RATE OF AA1100/BN METAL MATRIX COMPOSITES, International Journal of Mechanical Engineering and Technology, ISBN No.0976-6359, Vol No.7, Issue No.5, pp.9-17, September, 2016

 Chennakesava R Alavala, Probability Analysis Based on Normal Distribution for Optimistic Wear Rate of AA2024/Zirconia Metal Matrix Composites, American Journal of Engineering research, ISBN No.2320-0847, Vol No.5, Issue No.9, pp.48-52, September, 2016

 Chennakesava R Alavala, Nanomodeling of nonlinear thermoelastic behavior of AA5454/ silicon nitride nanoparticulate metal matrix composites, International Journal of Engineering Research and Application, ISBN No.2248-9622, Vol No.6, Issue No.1, pp.104-109, January, 2016

 Chennakesava R Alavala, High temperature and high strain rate superplastic deep drawing process for AA2618 alloy cylindrical cups, International Journal of Scientific Engineering and Applied Science, ISBN No.2395-3470, Vol No.2, Issue No.2, pp.35-41, February, 2016

 Chennakesava R Alavala, Evaluation of parametric significance in friction welding process for AA2024-T6 and Zr705 alloy using finite element analysis, International Journal of Engineering Research & Technology, ISBN No.2278-0181, Vol No.5, Issue No.1, pp.84-89, January, 2016

 Chennakesava R Alavala, Reliability computation of bursting strength of ammonia pipelines based on Choi’s criterion, International Journal of Innovative Research in Science, Engineering and Technology, ISBN No.2319-8753, Vol No.5, Issue No.1, pp.28-36, January, 2016

 Chennakesava R Alavala, Thermoelastic Behavior of Nanoparticulate BN/AA5050 Alloy Metal Matrix Composites, International Journal of Engineering and Advanced Research Technology, ISBN No.2454- 9290, Vol No.2, Issue No.1, pp.6-8, January, 2016

 Chennakesava R Alavala, Dependability of bursting strength on sulphate reducing bacteria promoted corrosion of natural gas pipelines, International Journal of Scientific & Engineering Research, ISBN No.2229-5518, Vol No.7, Issue No.1, pp.51-57, January, 2016

 Chennakesava R Alavala, Thermo-mechanical Behaviour and Metal –to-Mould Reactions of Cristobalite Investment Shell Moulds to Cast Ti-6Al-4V Alloy, International journal of advanced research, ISBN No.2320-5407, Vol No.4, Issue No.1, pp.101-106, January, 2016

 Chennakesava R Alavala, Influence of Chlorine Induced Corrosion and Temperature of Exothermic Reaction on Failure of Methyl Isocyanate (MIC) Storage Tanks, American Journal of Engineering Research, ISBN No.2320-0847 , Vol No.5, Issue No.2, pp.1-9, February, 2016

 A. Chennakesava Reddy, Finite Element Analysis of Injuries in Shoulder Bones and Joints: a Review, International Journal of Bio Technology and Research, ISBN No.2249-6858, Vol No.6, Issue No.1, pp.29-42, February, 2016

 Chennakesava R Alavala, Practicability of High Temperature and High Strain Rate Superplastic Deep Drawing Process for AA3003 Alloy Cylindrical Cups, International Journal of Engineering Inventions, ISBN No.2319-6491, Vol No.5, Issue No.3, pp.16-23, February, 2016

 Chennakesava R Alavala, High temperature and high strain rate superplastic deep drawing process for AA5049 alloy cylindrical cups, International Journal of Engineering Sciences & Research Technology, ISBN No.2277-9655, Vol No.5, Issue No.2, pp.261-268, February, 2016

 Chennakesava R Alavala, Influence of Crack Dimensions and Heat Treatment on Fracture Behaviour of AA1050 Alloy Pipes Subjected to Bursting Pressures, International Journal of Innovative Research in Advanced Engineering, ISBN No.2349-2163, Vol No.2, Issue No.3, pp.1-5, February, 2016

 Chennakesava R Alavala, Evaluation of Parametric Significance in Friction Welding Process for AA7020 and Zr705 Alloy using Finite Element Analysis, International Journal of Emerging Technology and Advanced Engineering, ISBN No.2250-2459, Vol No.6, Issue No.2, pp.40-46, February, 2016

 Chennakesava R Alavala, Micromechanical Modelling of Thermoelastic Behavior of AA7020/TiC Metal Matrix Composites, International Journal of Scientific Engineering and Research, ISBN No.2347-3878, Vol No.4, Issue No.2, pp.1-5, February, 2016

 T. Prasad; A. Chennakesava Reddy, Micro-Tensile Behavior of AA7020/Carbon Black Nanoparticle Metal Matrix Composites, International Journal of Engineering and Science, ISBN No.2278-4721, Vol No.6, Issue No.8, pp.36-40, September, 2016

 Chennakesava R Alavala, Micromechanics of Thermoelastic Behavior of AA2024/MgO Metal Matrix Composites, International Journal of Advanced Technology in Engineering and Science, ISBN No.2348-7550, Vol No.4, Issue No.1, pp.33-40, January, 2016

 Chennakesava R Alavala, Comparison of Experimental and Theoretical CTE of Al/h-BN Metal Matrix Composites, International Journal of Material Sciences and Technology, ISBN No.2249-3077, Vol No.6, Issue No.1, pp.13-20, September, 2016

 Chennakesava R Alavala, Micromechanics of Thermoelastic Behavior of AA6070 Alloy/Zirconium Oxide Nanoparticle Metal Matrix Composites, International Journal of Engineering Research & Science, ISBN No.2395-6992, Vol No.2, Issue No.2, pp.1-8, February, 2016

 A. Chennakesava Reddy, Effect of Yttrium Oxide Doping on CTE of Al/ZrO2 Metal Matrix Composites, IOSR Journal of Mechanical and Civil Engineering, ISBN No.2278-1684, Vol No.13, Issue No.5, pp.93-98, September, 2016

 P. Pavani; A. Chennakesava Reddy, Micromechanics of Thermoelastic Behavior of Polypropylene/Calcite (Modified with Triton X-100) Nanocomposites, International Journal of Science and Research, ISBN No.2319-7064, Vol No.5, Issue No.2, pp.1003-1006, February, 2016

 Chennakesava R Alavala, Effect of Thermoelastic Behavior on interfacial debonding and Particulate Fracture in AA1100/TiN Nanoparticulate Metal Matrix Composites, International Journal of Science and Research, ISBN No.2319-7064, Vol No.5, Issue No.3, pp.1295-1300, March, 2016

 Chennakesava R Alavala, Weldability of Friction Welding Process for AA2024 Alloy and SS304 Stainless Steel using Finite Element Analysis, International Journal of Engineering Research and Application, ISBN No.2248-9622, Vol No.6, Issue No.3, pp.53-57, March, 2016

 Chennakesava R Alavala, Influence of Temperature on Particulate Fracture of AA2024 Alloy/Titanium Oxide nanoparticulate Metal Matrix Composites, International Journal of Scientific Engineering and Applied Science, ISBN No.2395-3470, Vol No.2, Issue No.4, pp.1-6, April, 2016

 Chennakesava R Alavala, Suitability of High Temperature and High Strain Rate Superplastic Deep Drawing Process for AA5052 Alloy, International Journal of Engineering and Advanced Research Technology, ISBN No.2454- 9290, Vol No.2, Issue No.3, pp.11-14, March, 2016

 Chennakesava R Alavala, Influence of CTE Mismatch on Debonding and Particulate Damage in AA1100 Alloy/ZrC Nanoparticulate Metal Matrix Composites, International Journal of Innovative Research in Science, Engineering and Technology, ISBN No.2319-8753, Vol No.5, Issue No.3, pp.3489-3495, March, 2016

 A. Balaram Naik; A. Chennakesava Reddy, An Experimental Investigation of Shielded Metal Arc Welding processes on Duplex Stainless Steel to control and correction of distortion in Weldments, International Journal of Engineering Research, ISBN No.2319-6890, Vol No.5, Issue No.2, pp.421-426, IJER, February, 2016

 Y. Lekhana; A. Nikhila; K. Bharath; B. Naveen; A. Chennakesava Reddy, Weldability Analysis of 316 Stainless Steel and AA1100 Alloy Hollow Tubes using Rotational Friction Welding Process, International Journal of Science and Research, ISBN No.2319-7064, Vol No.5, Issue No.5, pp.622-627, IJSR, May, 2016

 G. Devendar; A. Chennakesava Reddy, Formability Limit Diagrams of Cold Deep Drawing Process for Nickel 201 Cylindrical Cups, International Journal of Science and Research, ISBN No.2319-7064, Vol No.5, Issue No.8, pp.1591-1598, IJSR, August, 2016

 V. Srija; A. Chennakesava Reddy, Finite Element Analysis of Friction Welding Process for 2024Al Alloy and UNS C23000 Brass, International Journal of Science and Research, ISBN No.2319-7064, Vol No.4, Issue No.5, pp.1685-1690, IJSR, 2015

 T. Santhosh Kumar; A. Chennakesava Reddy, Finite Element Analysis of Friction Welding Process for 2024Al Alloy and AISI 1021 Steel, International Journal of Science and Research, ISBN No.2319-7064, Vol No.4, Issue No.5, pp.1679-1684, IJSR, 2015

 A. Raviteja; A. Chennakesava Reddy, Finite Element Analysis of Friction Welding Process for UNS C23000 Brass and AISI 1021 Steel, International Journal of Science and Research, ISBN No.2319-7064, Vol No.4, Issue No.5, pp.1691-1696, IJSR, 2015

 A. Chennakesava Reddy, Formability of superplastic deep drawing process with moving blank holder for AA1050-H18 conical cups, International Journal of Research in Engineering and Technology, ISBN No.2319-1163, Vol No.4, Issue No.8, pp.124-132, IJRET, 2015

 A. Chennakesava Reddy, Design and Finite Element Analysis of E-glass Fiber Reinforced Epoxy Composite Air Bottle used in Missile System: Experimental Validation, International Journal of Scientific & Engineering Research, ISBN No.2229-5518, Vol No.6, Issue No.8, pp.157-165, IJSER, 2015

 A. Chennakesava Reddy, Application of Eulerian and Lagrangian couplings to estimate the influence of shock pressure loading on the submersible hull using finite element analysis, International Journal of Current Research, ISBN No.0975-833X, Vol No.7, Issue No.8, pp.19542-19547, www.journalcra.com, 2015

 A. Chennakesava Reddy, Application of Eulerian and Lagrangian couplings to estimate the influence of shock pressure loading on the titanium submersible hull using finite element analysis, International Journal of Scientific Research, ISBN No.2277 - 8179, Vol No.4, Issue No.9, pp.71-75, ijsr@theglobaljournals.com, 2015

 A. Chennakesava Reddy, Estimation of damage in cylinder subjected to shock pressure load using finite element analysis, International Journal of Advanced Research, ISBN No.2320-5407, Vol No.3, Issue No.8, pp.552-556, IJAR, 2015

 A. Chennakesava Reddy, Effects of Adhesive and Interphase Characteristics between Matrix and Reinforced Nanoparticle of AA2124/AlN Nanocomposites: Mathematical and Experimental Validation, International Journal of Engineering and Advanced Technology, ISBN No.2249-8958, Vol No.5, Issue No.1, pp.5-12, www.ijeat.org, 2015

 A. Chennakesava Reddy, Effects of Adhesive and Interphase Characteristics Between Matrix and Reinforced Nanoparticle of AA3105/AlN Nanocomposites, International Journal of Mechanical Engineering, ISBN No.2319-2240, Vol No.4, Issue No.5, pp.25-36, IASET, 2015

 A. Chennakesava Reddy, Shock Analysis of E-Glass/Epoxy Composite Submersible Hull Subjected to Pressure Loads of Underwater Explosion using Finite Element Method - Experimental Validation, International Journal of Scientific & Engineering Research, ISBN No.2229-5518, Vol No.6, Issue No.9, pp.1461-1468, IJSER, 2015

 A. Chennakesava Reddy, Consequences of Interphase between Matrix and Reinforced Nanoparticle on Behavior of AA6262/AlN Nanocomposites, International Journal of Science and Research, ISBN No.2319-7064, Vol No.4, Issue No.9, pp.1045-1049, IJSR, 2015

 A. Chennakesava Reddy, Effects of Adhesive And Interphase Characteristics Between Matrix And Reinforced Nanoparticle Of AA4032/AlN Nanocomposites, International journal of research in mechanical engineering, ISBN No.2347-5188, Vol No.3, Issue No.5, pp.13-21, WWW.IASTER.COM, 2015

 A. Chennakesava Reddy, Effects of Adhesive and Interphase Characteristics between Matrix and Reinforced Nanoparticle of AA5154/AlN Nanocomposites, International Journal of Advanced Research, ISBN No.2320-5407, Vol No.3, Issue No.9, pp.703-710, IJAR, 2015

 A. Chennakesava Reddy, Reduction of Vibrations and Noise using Nylon-66/Al2O3 Nanocomposite Gear Box in Lathe, International Journal of Science and Research, ISBN No.2319-7064, Vol No.4, Issue No.9, pp.1476-1480, IJSR, 2015

 A. Chennakesava Reddy, Reduction of Vibrations and Noise using Nylon-66/SiC Nanocomposite Gear Box in Lathe, International Journal of Science and Research, ISBN No.2319-7064, Vol No.4, Issue No.9, pp.1485-1489, IJSR, 2015

 A. Chennakesava Reddy, Reduction of Vibrations and Noise using Nylon-66/Fe2O3 Nanocomposite Gear Box in Lathe, International Journal of Science and Research, ISBN No.2319-7064, Vol No.4, Issue No.9, pp.1490-1494, IJSR, 2015

 A. Chennakesava Reddy, Reduction of Vibrations and Noise using AA7020/Al2O3 Nanocomposite Gear Box in Lathe, International Journal of Scientific & Engineering Research, ISBN No.2229-5518, Vol No.6, Issue No.9, pp.671-677, IJSER, 2015

 A. Chennakesava Reddy, Reduction of Vibrations and Noise using AA7020/SiC Nanocomposite Gear Box in Lathe, International Journal of Scientific & Engineering Research, ISBN No.2229-5518, Vol No.6, Issue No.9, pp.678-684, IJSER, 2015

 A. Chennakesava Reddy, Reduction of Vibrations and Noise using AA7020/Fe2O3 Nanocomposite Gear Box in Lathe, International Journal of Scientific & Engineering Research, ISBN No.2229-5518, Vol No.6, Issue No.9, pp.685-691, IJSER, 2015

 A. Chennakesava Reddy, Performance of Warm Deep Drawing Process for AA1050 Cylindrical Cups with and Without Blank Holding Force, International Journal of Scientific Research, ISBN No.2277 - 8179, Vol No.4, Issue No.10, pp.358-365, ijsr@theglobaljournals.com, 2015

 A. Chennakesava Reddy, Effects of Adhesive and Interphase Characteristics between Matrix and Reinforced Nanoparticle of AA8090/AlN Nanocomposites, Asian journal of engineering and technology, ISBN No.2321-2462, Vol No.3, Issue No.5, pp.505-511, ajet@ajouronline.com, October, 2015

 A. Chennakesava Reddy, Effects of Adhesive and Interphase Characteristics between Matrix and Reinforced Nanoparticle of AA6061/AlN Nanocomposites, International Journal of Nanotechnology and Application, ISBN No.2278-9391, Vol No.5, Issue No.5, pp.1-10, www.tjprc.org, 2015

 A. Chennakesava Reddy, Estimation of Thermoelastic Behavior of Three-phase: AA1100/Ni-Coated Boron Carbide Nanoparticle Metal Matrix Composites, International Journal of Scientific & Engineering Research, ISBN No.2229-5518, Vol No.6, Issue No.10, pp.662-667, IJSER, 2015

 A. Chennakesava Reddy, Formability of High Temperature and High Strain Rate Superplastic Deep Drawing Process for AA2219 Cylindrical Cups, International Journal of Advanced Research, ISBN No.2320-5407, Vol No.3, Issue No.10, pp.1016-1024, IJAR, 2015

 A. Balaram Naik; A.Chennakesava Reddy, Optimization of TIG welding process parameters on angular distortion of stainless steel 301 alloy weldments, Journal of Materials Science and Mechanical Engineering, ISBN No.2393-9095, Vol No.2, Issue No.13, pp.32-40, Krishi Sanskirti Publications, November, 2015

 A. Chennakesava Reddy, Development of Alumino-Silicate Investment Shell Moulds to Cast 6061 Al-Alloy, International Journal of Science and Research, ISBN No.2319-7064, Vol No.4, Issue No.11, pp.1183-1187, IJSR, November, 2015

 A. Chennakesava Reddy, Effects of Adhesive and Interphase Characteristics between Matrix and Reinforced Nanoparticle of AA7175/AlN Nanocomposites, International Journal of Scientific Engineering and Research, ISBN No.2347-3878, Vol No.3, Issue No.11, pp.95-98, IJSER, November, 2015

 A. Chennakesava Reddy, Comparison of microstructure of Al-Cu alloys cast in calcite investment shell and dry sand moulds, International Journal of Engineering Sciences & Research Technology, ISBN No.2277-9655, Vol No.4, Issue No.11, pp.688-693, www.ijesrt.com, November, 2015

 A. Chennakesava Reddy, Simulation of Femur Bone Fracture in Car Accident using CT Scan Data and Finite Element Analysis, International Journal of Science and Research, ISBN No.2319-7064, Vol No.4, Issue No.11, pp.1805-1807, IJSR, November, 2015

 B. M. Angadi; A. Chennakesava Reddy; I.G.Bhavi; S.S.Chappar; S. A. Kori, Finite element analysis of hypereutectic aluminium silicon alloys, International Journal of Industrial Engineering and Technology, ISBN No.0974-3146, Vol No.7, Issue No.1, pp.51-56, January, 2015

 A. Chenna kesava Reddy, Simulation analysis of four-pass shape roll forming of I-sections, International Journal of Mechanical and Production Engineering Research and Development, ISBN No.2249-8001, Vol No.5, Issue No.1, pp.35-44, www.tjprc.org, 2015

 B. M. Angadi; A. Chennakesava Reddy; V. V. Katti; V.V. Nagathan; S. A. Kori, Effect of Phosphorous, Titanium-Boron and Titanium on Thermal Properties of Hypereutectic Aluminium-Silicon Alloys, International Journal of Applied Engineering Research, ISBN No.0973-4562, Vol No.10, Issue No.23, pp.43752-43757, 2015

 A. Chennakesava Reddy, Trustworthy prediction of bursting strength of ductile iron pipes based on Fitnet FSS criterion, International Journal of Research in Engineering and Technology, ISBN No.2319-1163, Vol No.4, Issue No.12, pp.48-53, December, 2015

 R. V. S. K. Varma; A. Chennakesava Reddy, Optimization of Bursting Behavior of AA2090 Al-Alloy Pipes Using Taguchi Techniques and Finite Element Analysis, International Journal of Scientific Engineering and Research, ISBN No.2347-3878, Vol No.3, Issue No.12, pp.35-38, December, 2015

 M. Akhil; A. Chennakesava Reddy, Evaluation of Structural Integrity under Bursting Conditions of Heat Treated 2219 Al-Alloy Pipes Using Finite Element Analysis, International Journal of Scientific Engineering and Research, ISBN No.2347-3878, Vol No.3, Issue No.12, pp.39-43, December, 2015

 A.Sreeteja; A. Chennakesava Reddy, Influence of Crack Size on Fracture Behavior of Heat Treated 2011 Al-Alloy Pipes Using Finite Element Analysis, International Journal of Scientific Engineering and Research, ISBN No.2347-3878, Vol No.3, Issue No.12, pp.47-50, December, 2015

 D. V. Srikanth K.K. Chaturvedi; A. Chenna kesava Reddy;, Theoretical evaluation of the operational characteristics in a large thrust bearing, Tribology online, ISBN No.1881-2198, Vol No.10, Issue No.5, pp.336-343, 2015

 A. Chennakesava Reddy, Influence of volume fraction, size, cracking, clustering of particulates and porosity on the strength and stiffness of 6063/SiCp metal matrix composites, International Journal of Research in Engineering and Technology, ISBN No.2321-7308, Vol No.4, Issue No.1, pp.1-9, IJRET, 2015

 A. Chennakesava Reddy, Studies on loading, cracking and clustering of particulates on the strength and stiffness of 7020/SiCp metal matrix composites, International Journal of Metallurgical & Materials Science and Engineering, ISBN No.2278-2516, Vol No.5, Issue No.1, pp.53-65, www.tjprc.org, 2015

 A. Chenna kesava Reddy, Cause and Catastrophe of Strengthening Mechanisms in 6061/Al2O3 Composites Prepared by Stir Casting Process and Validation Using FEA, International Journal of Science and Research, ISBN No.2319-7064, Vol No.4, Issue No.2, pp.1272-1281, IJSR, 2015

 A. Chenna kesava Reddy, Influence of Particle Size, Precipitates, Particle Cracking, Porosity and Clustering of Particles on Tensile Strength of 6061/SiCp Metal Matrix Composites and Validation Using FEA, International Journal of Material Sciences and Manufacturing Engineering, ISBN No.2051-6851, Vol No.42, Issue No.1, pp.1176-1186, recentscience.org, 2015

 A. Chenna kesava Reddy, Fatigue Life Evaluation of Joint Designs for Friction Welding of Mild Steel and Austenite Stainless Steel, International Journal of Science and Research, ISBN No.2319-7064, Vol No.4, Issue No.2, pp.1714-1719, IJSR, 2015

 A.Chenaakesava Reddy; B. Kotiveerchari; P. Rami Reddy, Robotic Configuration for Paralyzed Swing Leg with Motion Captured Stance Hip Orientation, International Journal of Scientific & Engineering Research, ISBN No.2229-5518, Vol No.6, Issue No.2, pp.166-170, IJSER, 2015

 A. Chenna kesava Reddy, Reliability of Automobile Car Wheel Subjected to Fatigue Radial Loading by Weibull Analysis, International Journal of Scientific & Engineering Research, ISBN No.2229-5518, Vol No.6, Issue No.2, pp.628-631, IJSER, 2015

 A.Chenaakesava Reddy; B. Kotiveerchari; P. Rami Reddy, Robotic configuration for paralyzed swing leg with effort minimization of all joints to get gait trajectory, International Journal of Advanced Research, ISBN No.2320-5407, Vol No.3, Issue No.2, pp.981-990, IJAR, 2015

 A. Chennakesava Reddy, Evaluation of Curing Process for Carbon-Epoxy Composites by Mechanical Characterization for Re-entry Vechicle Structure, International Journal of Scientific & Engineering Research, ISBN No.2229-5518, Vol No.6, Issue No.3, pp.65-70, IJSER, 2015

 A.Chennakesava Reddy; B. Kotiveerachari; P. Rami Reddy, Saving of Thermal Energy in Air-Gap Insulated Pistons Using Different Composite Materials for Crowns, International Journal of Scientific & Engineering Research, ISBN No.2229-5518, Vol No.6, Issue No.3, pp.71-74, IJSER, 2015

 A. Chennakesava Reddy, Cause and Catastrophe of Strengthening Mechanisms in 6063/Al2O3 Composites Prepared by Stir Casting Process: Validation through FEA, International Journal of Scientific & Engineering Research, ISBN No.2229-5518, Vol No.6, Issue No.3, pp.75-83, IJSER, 2015

 D.U.M. Manikanta; A.Chennakesava Reddy, Fracture Behavior of 6061 Al-Alloy Pipes under Bursting Loads with Crack Depth Variation, International Journal of Scientific & Engineering Research, ISBN No.2229-5518, Vol No.6, Issue No.3, pp.338-343, IJSER, 2015

 A.Chenaakesava Reddy; B. Kotiveerchari; P. Rami Reddy, Robotic configuration for paralyzed swing leg with effort minimization of stance hip torques, International Journal of Advanced Research, ISBN No.2320-5407, Vol No.3, Issue No.3, pp.659-668, IJAR, 2015

 A.Chenaakesava Reddy, Cause and catastrophe of strengthening mechanisms in 7020/Al2o3 composites prepared by stir casting process and validation through FEA, International Journal of Advanced Research, ISBN No.2320-5407, Vol No.3, Issue No.3, pp.603-614, IJAR, 2015

 S. Madhava Reddy; A. Chennakesava Reddy, Effect of contact time, sliding speed and normal pressure on friction of Al-Si-Mg-Fe alloy, International journal engineering science & management , ISBN No.2277-5528, Vol No.5, Issue No.1, pp.237-241, www.ijesmjournal.com, 2015

 D. Aradhana; K. Karibasappa; A. Chennakeshava Reddy, Feature Extraction and Recognition Using Soft Computing Tools, International Journal of Scientific & Engineering Research, ISBN No.2229-5518, Vol No.6, Issue No.3, pp.1436-1443, IJSER, 2015

 A.Chenaakesava Reddy; B. Kotiveerchari; P. Rami Reddy, Robotic Configuration for Paralyzed Swing Leg with Effort Minimization of Stance Hip Torques and Bounded Stance Hip Orientation, International Journal of Scientific & Engineering Research, ISBN No.2229-5518, Vol No.6, Issue No.4, pp.370-377, IJSER, 2015

 A.Chenaakesava Reddy, Characterization of Mechanical and Tribological Behavior of (Nylon 6 + Graphite + Teflon) Nano Particulate Composite: Application Perspective, International Journal of Scientific & Engineering Research, ISBN No.2229-5518, Vol No.6, Issue No.4, pp.378-386, IJSER, 2015

 Kothapalli Chandini; A.Chennakesava Reddy, Parametric Importance of Warm Deep Drawing Process for 1070A Aluminium Alloy: Validation through FEA, International Journal of Scientific & Engineering Research, ISBN No.2229-5518, Vol No.6, Issue No.4, pp.399-407, IJSER, 2015

 Balla Yamuna; A.Chennakesava Reddy, Parametric Merit of Warm Deep Drawing Process for 1080A Aluminium Alloy: Validation through FEA, International Journal of Scientific & Engineering Research, ISBN No.2229-5518, Vol No.6, Issue No.4, pp.416-424, IJSER, 2015

 A.Chennakesava Reddy, Fatigue Life Prediction of Different Joint Designs for Friction Welding of 1050 Mild Steel and 1050 Aluminum, International Journal of Scientific & Engineering Research, ISBN No.2229-5518, Vol No.6, Issue No.4, pp.408-412, IJSER, 2015

 Thirunagari Srinivas; A. Chennakesava Reddy, Parametric Optimization of Warm Deep Drawing Process of 1100 Aluminum Alloy: Validation through FEA, International Journal of Scientific & Engineering Research, ISBN No.2229-5518, Vol No.6, Issue No.4, pp.425-433, IJSER, 2015

 A. Chennakesava Reddy, Homogenization and Parametric Consequence of Warm Deep Drawing Process for 1050A Aluminum Alloy: Validation through FEA, International Journal of Science and Research, ISBN No.2319-7064, Vol No.4, Issue No.4, pp.2034-2042, IJSR, 2015

 A. Chennakesava Reddy, Evaluation of Curing Process for Kevlar 49-Epoxy Composites by Mechanical Characterization Designed for Brake Liners, International Journal of Science and Research, ISBN No.2319-7064, Vol No.4, Issue No.4, pp.2365-2371, IJSR, 2015

 D.U.M. Manikanta; AC Reddy, Fracture Behavior of 6061 Al-Alloy Pipes under Bursting Loads with Crack Length Variation, International Journal of Advanced Research, ISBN No.2320-5407, Vol No.3, Issue No.4, pp.657-665, IJAR, 2015

 A. Chennakesava Reddy, Evaluation of Curing Process for Bi-directional S-Glass (5HS)/Epoxy (780E +782H) Composites Fabricated by Vacuum Infusion Process for Wind Energy Blades, International Journal of Advanced Research, ISBN No.2320-5407, Vol No.3, Issue No.4, pp.667-675, IJAR, 2015

 V. Nagamani; A. Chennakesava Reddy, Turbulent and incompressible flow in a shell and tube heat exchanger, International Journal of Advanced Research, ISBN No.2320-5407, Vol No.3, Issue No.4, pp.676-683, IJAR, 2015

 Karan Agarwal; Nirmala Akhi; Regalla Srinivas; A. Chennakesava Reddy, Enhancement in Mechanical Behavior of Nylon/Teflon Composites by Addition of Nano Iron Oxide (?-Fe2O3), International Journal of Science and Research, ISBN No.2319-7064, Vol No.4, Issue No.5, pp.927-932, IJSR, 2015

 A. Chennakesava Reddy, Parametric Optimization of Warm Deep Drawing Process of 2014T6 Aluminum Alloy Using FEA, International Journal of Scientific & Engineering Research, ISBN No.2229-5518, Vol No.6, Issue No.5, pp.1016-1024, IJSER, 2015

 A. Chennakesava Reddy, Parametric Significance of Warm Drawing Process for 2024T4 Aluminum Alloy through FEA, International Journal of Science and Research, ISBN No.2319-7064, Vol No.4, Issue No.5, pp.2345-2351, IJSR, 2015

 A. Chennakesava Reddy, Characterization of Mechanical Behavior of Nylon/Teflon Nano Particulate Composites, International Journal of Advanced Research, ISBN No.2320-5407, Vol No.3, Issue No.5, pp.1241-1246, IJAR, 2015

 A. Chennakesava Reddy, Finite Element Analysis of Warm Deep Drawing Process for 2017T4 Aluminum Alloy: Parametric Significance Using Taguchi Technique, International Journal of Advanced Research, ISBN No.2320-5407, Vol No.3, Issue No.5, pp.1247-1255, IJAR, 2015

 D.U.M. Manikanta; A. Chennakesava Reddy, Optimization of Fracture Behavior of AA6061 Al- Alloy Pipes Using Finite Element Analysis, International Journal of Science and Research, ISBN No.2319-7064, Vol No.4, Issue No.6, pp.1509-1515, IJSR, 2015

 A. Chennakesava Reddy, Necessity of Strain Hardening to Augment Load Bearing Capacity of AA1050/AlN Nanocomposites, International Journal of Advanced Research, ISBN No.2320-5407, Vol No.3, Issue No.6, pp.1211-1219, IJAR, 2015

 Balla yamuna; A.Chennakesava Reddy, Finite Element Analysis of Warm Deep Drawing Process for Conical Cup of AA1080 Aluminum Alloy, International Journal of Advanced Research, ISBN No.2320-5407, Vol No.3, Issue No.6, pp.1309-1317, IJAR, 2015

 Kothapalli Chandini; A.Chennakesava Reddy, Finite Element Analysis of Warm Deep Drawing Process for Pyramidal Cup of AA1070 Aluminum Alloy, International Journal of Advanced Research, ISBN No.2320-5407, Vol No.3, Issue No.6, pp.1325-1334, IJAR, 2015

 Thirunagari Srinivas; A. Chennakesava Reddy, Finite Element Analysis of Warm Deep Drawing Process for Rectangular Cup of AA1100 Aluminum Alloy, International Journal of Advanced Research, ISBN No.2320-5407, Vol No.3, Issue No.6, pp.1383-1391, IJAR, 2015

 A. Chennakesava Reddy, The Essence of Research Development as a Component in the Faculty Workload of Technological Universities and Engineering Colleges, International Journal of Science and Research, ISBN No.2319-7064, Vol No.4, Issue No.7, pp.29-33, IJSR, 2015

 T. Prasad; A. Chennakesava Reddy, Effects of Adhesive Characteristics between Matrix and Reinforced Nanoparticle of AA6061/Carbon Black Nanocomposites, International Journal of Scientific & Engineering Research, ISBN No.2229-5518, Vol No.6, Issue No.7, pp.40-45, IJSER, 2015

 T. Prasad; A. Chennakesava Reddy, Effects of Adhesive Characteristics between Matrix and Reinforced Nanoparticle of AA6063/Carbon Black Nanocomposites, International Journal of Science and Research, ISBN No.2319-7064, Vol No.4, Issue No.7, pp.1777-1781, IJSR, 2015

 A. Chennakesava Reddy, Formability of Warm Deep Drawing Process for AA1050-H18 Pyramidal Cups, International Journal of Science and Research, ISBN No.2319-7064, Vol No.4, Issue No.7, pp.2111-2119, IJSR, 2015

 A. Chennakesava Reddy, Formability of Warm Deep Drawing Process for AA1050-H18 Rectangular Cups, International Journal of Mechanical and Production Engineering Research and Development, ISBN No.2249-8001, Vol No.5, Issue No.4, pp.85-97, www.tjprc.org, 2015

 A. Chennakesava Reddy, Finite Element Analysis of Friction Welding Process for AA7020-T6 and Ti-6Al-4V Alloy: Experimental Validation, International Journal of Science and Research, ISBN No.2319-7064, Vol No.4, Issue No.8, pp.947-952, IJSR, 2015

 A. Chennakesava Reddy, Influence of Interphase on Tensile Behavior of Strain Hardened AA1100/AlN Nanocomposites Using RVE Models and Experimental Validation, International Journal of Engineering, Science and Technology, ISBN No.0975-5462, Vol No.7, Issue No.7, pp.239-250, Engg Journals Publications, 2015

 J. N. Malleswara Rao; P. Rakesh; P. S. Srinivas; A. Chennakesava Reddy, Experimental Technique to Minimize the Model Material Requirement for the Turbine Shaft in Rapid Prototyping (FDM), International Journal of Innovative Research in Advanced Engineering, ISBN No.2278-2311, Vol No.1, Issue No.3, pp.1-5, IJIRAE, 2014

 J. N. Malleswara Rao; A. Chennakesava Reddy; M. Sumalatha, Experimental Investigation of the influence of Roller Burnishing Tool Passes on Surface Roughness and Hardness of Brass Specimens, International Journal of Research in Mechanical Engineering & Technology, ISBN No.2249-5770, Vol No.4, Issue No.1, pp.142-145, IJRMET, 2014

 B.M. Angadi; R. Hiremath; A.Chennakesava Reddy; V. V. Katti; S. A. Kori, Studies on the Thermal Properties of Hypereutectic Al-Si Alloys by Using Transient Method, Journal of Mechanical Engineering Research and Technology, ISBN No.2349-9524, Vol No.2, Issue No.1, pp.538-544, JMERT, 2014

 D. V. Srikanth; K.K. Chaturvedi; A. Chenna kesava Reddy, Evaluation of Operational Characteristics in a Large Thrust Bearing, International Journal of Surface Engineering and Interdisciplinary Materials Science, ISBN No.2166-7225, Vol No.2, Issue No.1, pp.59-73, IGI Global, 2014

 S. Madhava Reddy; A. Chennakesava Reddy; K. Sudhakar Reddy, Effect of chip segmentation on cutting forces at high speed milling of Al-alloys, International Journal of Current Engineering and technology, ISBN No.2277-4106 , Vol No.2, Issue No.2, pp.277-280, INPRESSCO, 2014

 S. Sreenivasulu; A. Chennakesava Reddy, Mechanical Properties Evaluation of Bamboo Fiber Reinforced Composite, International Journal of Engineering Research, ISBN No.2319- 6890, Vol No.3, Issue No.1, pp.187-194, IJER, 2014

 S. Madhava Reddy; A. Chennakesava Reddy, Influence of Process Variables on Cutting Induced Workpiece Temperature in High Speed Milling of Al-Si-Mg-Fe Alloys Using Taguchi’s Technique, International Journal of Innovative Research in Science, Engineering and Technology, ISBN No.2319-8753, Vol No.3, Issue No.6, pp.13097-13103, June, 2014

 T. Prasad, A. Chennakesava Reddy, T.Tirupati, Material Characterization Of 6061 Al-SiCp Metal Matrix Composites, International Journal of Mathematical Sciences, Technology and Humanities, ISBN No.2249-5460, Vol No.3, Issue No.1, pp.756-765, January, 2013

 D. V. Srikanth; K.K. Chaturvedi; A. Chenna kesava Reddy, Determination of Pad Thickness in a Large Thrust Bearing, Journal of Tribology and Surface Engineering, ISBN No.1949-4866, Vol No.3, Issue No.1&2, pp.67-86, Nova Science Publishers, USA, 2013

 S. Madhava Reddy; A. Chennakesava Reddy, Influence of Process Parameters on Residual Stresses Induced by Milling of Aluminum Alloy Using Taguchi's Techniques, International Journal of Mechanical Engineering, ISBN No.0974-5823, Vol No.5, Issue No.2, pp.69-74, Serials Publications Pvt. Ltd., 2013

 S. Madhava Reddy; A. Chennakesava Reddy, Studies on Process Parameters in End Milling Operations of Aluminium Alloy, International Journal of Engineering Research & Technology, ISBN No.2278-0181, Vol No.2, Issue No.3, pp.1-5, ESRSA Publication, 2013

 S.Madhava Reddy; A.Chennakesava Reddy, Studies on Tool Wear, Cutting Forces and Chip Morphology During High-Speed Milling of Al-Si-Mg- Fe Alloys, International Journal of Engineering Sciences & Research Technology, ISBN No.2277-9655, Vol No.2, Issue No.8, pp.1987-1985, IJESRT, 2013

 A. Balaram Naik; A. Chennakesava Reddy; B. Balakrishna, Characteristics optimization of different welding processes on duplex stainless steels using statistical approach and taguchi technique: A review guide, International Journal of Engineering Inventions, ISBN No.2319-6491, Vol No.2, Issue No.3, pp.26-34, IJEI, 2013

 A. Chennakesava Reddy, Studies on the effects of oxidation and its repression in MAG welding process, International Journal of Advanced Research in Engineering and Technology , ISBN No.0976-6499, Vol No.3, Issue No.1, pp.48-54, IAEME Publication, 2012

 A. Chennakesava Reddy; T. Kishen Kumar Reddy; M. Vidya Sagar, Experimental characterization of warm deep drawing process for EDD steel, International Journal of Multidisciplinary Research & Advances in Engineering, ISBN No.0975-7074, Vol No.4, Issue No.3, pp.53-62, www.ascent-journals.com, 2012

 S. Pitchi Reddy; B.Ramana; A. Chennakesava Reddy , Sintered Density and Porosity of Al-15wt% Pb/Fly-ash Metal Matrix Composites, International Journal of Engineering and Materials Sciences, ISBN No.0974-584X, Vol No.5, Issue No.1, pp.59-66, Serials Publications Pvt. Ltd., 2012

 A. Chennakesava Reddy; M. Vidya Sagar; G. Satish Babu, Optimal Design of Automobile Leaf Spring using Finite Element Analysis, International Journal of Theoretical and Applied Mechanics, ISBN No.0973-6085, Vol No.7, Issue No.2, pp.87-94, Research India Publications, 2012

 D.V. Srikanth; K.K. Chaturvedi; A. Chennakesava redy, Determination of a large tilting pad thrust bearing angular stiffness, Tribology International, ISBN No.0301-679X, Vol No.47, pp.69-76, Elsevier, 2012

 A. Chennakesava Reddy, Evaluation of local thinning during cup drawing of gas cylinder steel using isotropic criteria, International Journal of Engineering and Materials Sciences, ISBN No.0974-584X, Vol No.5, Issue No.2, pp.71-76, Serials Publications Pvt. Ltd., 2012

 S. Madhava Reddy; A. Chennakesava Reddy; K. Sudhakar Reddy, Latest developments in condition monitoring of machining operations, Journal of Applied Sciences, ISBN No.1812-5654, Vol No.12, Issue No.10, pp.938-946, SCIENCE ALERT, 2012

 A. Chennakesava Reddy, Essa Zitoun, Tensile properties and fracture behavior of 6061/Al2O3 metal matrix composites fabricated by low pressure die casting process, International Journal of Materials Sciences, ISBN No.0973-4589, Vol No.06, Issue No.02, pp.147-157, Research India Publications, 2011

 A. Chennakesava Reddy, Optimization of Extrusion Process of Alloy 6063 Using Taguchi Technique, International Journal of Multi- Disciplinary Research & Advances in Engineering, ISBN No.0975-7074, Vol No.3, Issue No.2, pp.173-190, www.ascent-journals.com, 2011

 A. Chennakesava Reddy, Effects of holding temperature and time for austempering on impact toughness of medium carbon and high alloy steel, International Journal of Computer Network Security, ISBN No.0975-8283, Vol No.3, Issue No.1, pp.8-11, gopalax Publications, 2011

 A. Chennakesava Reddy, Influence of strain rate and temperature on superplastic behavior of sinter forged Al6061/SiC metal matrix composites, International Journal of Engineering Research & Technology, ISBN No.0974-3154, Vol No.4, Issue No.2, pp.1189-198, Research India Publications, 2011

 Niranjan Murthy; V. Krishnan; A. Chennakesava Reddy, An Experimental Investigation of Multiple Water and Air Jet Impingement Cooling, International Journal of Applied Engineering Research, ISBN No.0973-4562, Vol No.6, Issue No.5, pp.661-672, Research India Publications, 2011

 A. Chennakesava Reddy, Effects of austenizing on the fracture mechanism of hardened high carbon steel, International Journal of Materials Engineering and Technology, ISBN No.0975-0444, Vol No.5, Issue No.1, pp.21-27, Pushpa Publishing House, 2011

 D. Aradhana; K. Karibasappa; A. Chennakesava Reddy, Human face recognition by cognitive model using fuzzy clustering technique, International journal of computer science and network security, ISBN No.1738-7906, Vol No.11, Issue No.5, pp.217-223, editor@ijcsns.org, 2011

 D. Aradhana; K. Karibasappa; A. Chennakesava Reddy, Identification and removal of impulsive noise from corrupted images using hypergraph model, British Journal of Mathematics & Computer Science, ISBN No.2231-0851, Vol No.1, Issue No.2, pp.112-120, SCIENCEDOMAIN international, 2011

 A. Chennakesava Reddy, Analysis of welding distortion in seam and skip arc weldings using finite element method, International Journal of Mechanical Engineering Research & Development, ISBN No.2248-9355, Vol No.1, Issue No.1, pp.12-18, PRJ Publication, 2011

 D. Aradhana; K. Karibasappa; A. Chennakesava Reddy, Face recognition by bunch graph method using a group based adaptive tolerant neural network, British Journal of Mathematics & Computer Science, ISBN No.2231-0851, Vol No.1, Issue No.4, pp.194-203, SCIENCEDOMAIN international, 2011

 A. Chennakesava Reddy; Essa Zitoun, Strengthening mechanisms and fracture behavior of 7072Al/Al2O3 metal matrix composites, International Journal of Engineering Science and Technology , ISBN No.0975-5462, Vol No.3, Issue No.7, pp.6090-6100, Engg Journals Publications, 2011

 S. Pitchi Reddy; B.Ramana; A. Chennakesava Reddy, Determination green hardness and strength al-15% Pb-fly ash metal matrix composites, International Journal of Emerging Technologies and Applications in Engineering Technology and Sciences, ISBN No.0974-3588, Vol No.4, Issue No.2, pp.11-14, AMOGHSIDDHI EDUCATION SOCIETY, 2011

 A. Chennakesava Reddy, Evaluation of mechanical behavior of Al-alloy/Al2O3 metal matrix composites with respect to their constituents using Taguchi, International Journal of Emerging Technologies and Applications in Engineering Technology and Sciences, ISBN No.0974-3588, Vol No.4, Issue No.2, pp.26-30, AMOGHSIDDHI EDUCATION SOCIETY, 2011

 J.N. Malleswara Rao; A. Chennakesava Reddy; P.V. Rama Rao, Study of roller burnishing process on aluminum work pieces using design of experiments, International Journal of Mechanical Engineering & Technology, ISBN No.0976 - 6340, Vol No.2, Issue No.1, pp.22-35, IAEME Publication, 2011

 J.N. Malleswara Rao; A. Chennakesava Reddy; P.V. Rama Rao, The effect of roller burnishing on surface hardness and surface roughness on mild steel specimens, International Journal of Applied Engineering Research, ISBN No.0976-4259, Vol No.1, Issue No.4, pp.777-785, INTEGRATED PUBLISHING ASSOCIATION, 2011

 J.N. Malleswara Rao; A. Chennakesava Reddy; P.V. Rama Rao, Evaluation of optimum values of surface roughness on aluminum work piece using roller burnishing, International Journal of Engineering Research & Technology, ISBN No.0974-3154, Vol No.4, Issue No.3, pp.293-303, Research India Publications, 2011

 J.N. Malleswara Rao; A. Chennakesava Reddy; P.V. Rama Rao; B. Mayuri, Finite element approach for the prediction of residual stresses in aluminum work pieces produced by roller burnishing, International Journal of Design and Manufacturing Technology, ISBN No.0976 - 6995, Vol No.2, Issue No.1, pp.7-20, IAEME Publication, 2011

 Sandeep Patil; U.M. Choudhari; A. Chennakesava Reddy, Computer integrated Injection mould split design-reverse engineering approach, International Journal of Applied Engineering Research, ISBN No.0973-4562, Vol No.6, Issue No.13, pp.1661-1672, Research India Publications, 2011

 A. Chennakesava Reddy; G. Satish Babu, Dynamic mechanisms of kneecap, compliant ankle and passive swing leg to simulate human walking robot, International Journal of Advanced Mechatronics and Robotics, ISBN No.0975-6108, Vol No.3, Issue No.1, pp.1-7, Serials Publications Pvt. Ltd., 2011

 S. Madhava Reddy; A. Chennakesava Reddy, Evaluation of process parameters on surface roughness and residual stresses in high-speed end milling of Al-Si-Mg-Fe alloy, International Journal of Advances in Machining and Forming Operations, ISBN No.0975-4784, Vol No.3, Issue No.1, pp.57-70, Serials Publications Pvt. Ltd., 2011

 A. Chennakesava Reddy, Effects of Rapid Preheating and Solution Heat Treatment on Mechanical Properties of AA2618 forged samples, International Journal of Applied Research in Mechanical Engineering, ISBN No.2231-5950, Vol No.1, Issue No.2, pp.1-4, interscience, 2011

 A. Chennakesava Reddy, Tensile fracture behavior of 7072/SiCp metal matrix composites fabricated by gravity die casting process, Materials Technology, ISBN No.1066-7857, Vol No.26, Issue No.5, pp.257-262, 2011

 Niranjan Murthy; V. Krishnan; A. Chennakesava Reddy, Experimental Investigation of Heat transfer Enhancement using Impingement of Multiple Water Jets, Heat Transfer - Asian research, ISBN No.1099-2871, Vol No.39, Issue No.4, pp.222-230, Wiley Periodicals, Inc, 2010

 D.V. Srikanth; K.K. Chaturvedi; A.Chennakesava Reddy, Predictions of Performance Characteristics in a large Tilting Pad Thrust Bearing, Journal of Tribology and Surface Engineering, ISBN No.1949-4866, Vol No.1, Issue No.1&2, pp.21-28, Nova Science Publishers, USA, 2010

 S. Pitchi Reddy; B.Ramana; A. Chennakesava Reddy, Compacting Characteristics of Aluminum - 10 wt% Fly Ash - Lead Metal Matrix Composites, International Journal of Materials Science, ISBN No.0973-4589, Vol No.5, Issue No.6, pp.777-783, Research India Publications, 2010

 A. Chennakesava Reddy; B. Kotiveerachari , Effect of aging condition on structure and the properties of Al-alloy / SiC composite, International Journal of Engineering and Technology, ISBN No.0975-4024, Vol No.2, Issue No.6, pp.462-465, Engg Journals Publications, 2010

 A. Chennakesava Reddy, Tensile properties and fracture behavior of 6063/SiCP metal matrix composites fabricated by investment casting process, International Journal of Mechanical Engineering and Materials Sciences, ISBN No.0974-584X, Vol No.3, Issue No.1, pp.73-78, Serials Publications Pvt. Ltd., 2010

 A. Chennakesava Reddy; M. Vidya Sagar, Two-dimensional theoretical modeling of anisotropic wear in carbon/epoxy FRP composites: comparison with experimental data, International Journal of Theoretical and Applied Mechanics, ISBN No.0973-6085, Vol No.6, Issue No.1, pp.47-57, Research India Publications, 2010

 A. Chennakesava Reddy, Fluidity and weld bead characteristics of Al-Si-Cu alloy prepared by MIG welding, International Journal of Manufacturing Science and Engineering, ISBN No.0973-5496, Vol No.1, Issue No.2, pp.55-59, Serials Publications Pvt. Ltd., 2010

 Niranjan Murthy; V. Krishnan; A. Chennakesava Reddy, Parametric study of Heat transfer Enhancement using Impingement of Multiple Water Jets, International Journal of Applied Engineering Research, ISBN No.0973-4562, Vol No.5, Issue No.4, pp.3553-3564, Research India Publications, 2010

 Niranjan Murthy; V. Krishnan; A. Chennakesava Reddy, Parametric study of Heat transfer Enhancement using Impingement of Multiple air Jets, ISST Journal of Mechanical Engineering, ISBN No.0976-7371, Vol No.1, Issue No.2, pp.31-37, INTELLECTUALS SOCIETY FOR SOCIO-TECHNO WELFARE, 2010

 A. Chennakesava Reddy; Essa Zitoun, Tensile behavior of 6063/Al2O3 particulate metal matrix composites fabricated by investment casting process, International Journal of Applied Engineering Research, ISBN No.0976-4259, Vol No.1, Issue No.2, pp.542-552, INTEGRATED PUBLISHING ASSOCIATION, 2010

 A. Chennakesava Reddy; Ch. Rajanna, Design of gravity die casting process parameters of Al-Si-Mg alloys, Journal of Forming and Machining, ISBN No.1947-4369, Vol No.1, Issue No.1&2, pp.1-21, Nova Science Publishers, USA, 2009

 V. Mahesh; Sandeep Dullari; A. Chennakesava Reddy; C.S.P. Rao, The impact of powers of two based schedule on the minimization of inventory costs in a multi product manufacturing environment, International Journal of Applied management and Technology, ISBN No.1554-4740, Vol No.6, Issue No.4, pp.29-47, Walden University, 2009

 A. Chennakesava Reddy, Mechanical properties and fracture behavior of 6061/SICp Metal Matrix Composites Fabricated by Low Pressure Die Casting Process, Journal of Manufacturing Technology Research, ISBN No.1943-8095, Vol No.1, Issue No.3&4, pp.273-286, Nova Science Publishers, USA, 2009

 D.V. Srikanth; K.K. Chaturvedi; A.Chennakesava Reddy, Modelling of large tilting pad thrust bearing stiffness and damping coefficients, Tribology in Industry, ISBN No.0354-8996, Vol No.31, Issue No.3&4, pp.23-28, Journal of the Serbian Tribology Society, 2009

 J.J.V. Jeyasingh; G. Kothandaraman; P.P.Sinha; B. Nageswara Rao; A. Chennakesava Reddy, Spherical dome formation by transformation of superplasticity of titanium alloys and titanium matrix composites, International Journal of Materials Science & Engineering, ISBN No.0921-5093, Issue No.478, pp.397-401, Elsevier, 2008

 J.V.Jeysingh; B. Nageswara Rao; A. Chennakesava Reddy, Investigation on failures of hydroforming deep drawing processes, Materials Science Research Journal, ISBN No.1935-2441, Vol No.2, Issue No.3&4, pp.145-168, Nova Science Publishers, USA, 2008

 J.V.Jeysingh; B. Nageswara Rao; A. Chennakesava Reddy, Development of a ductile fracture criterion in cold forming, Materials Science Research Journal, ISBN No.1935-2441, Vol No.2, Issue No.3&4, Nova Science Publishers, USA, 2008

 J.V.Jeysingh; B. Nageswara Rao; A. Chennakesava Reddy, Gas pressure forming of spherical domes from Pb-Sn eutectic alloy superplastic sheet material, Materials Science Research Journal, ISBN No.1935-2441, Vol No.2, Issue No.3&4, pp.241-258, Nova Science Publishers, USA, 2008

 S. Satyanarayana; A. Chennakesava Reddy, High pressure Die Casting of AA7020/Zirconium Carbide Particulate Metal matrix Composites, 6th International Conference on Composite Materials and Characterization, Hyderabad, pp.155-159, June, 2007

 A. Chennakesava Reddy; V.S.R.Murti; P.M.Jebaraj, A new technique for measurement of the strength of ceramic shells in the precision casting process, Journal of Testing and Evaluation, ISBN No.0090-3973, Vol No.28, Issue No.3, pp.224-226, 2000

 P. Martin Jebaraj; A. Chennakesava Reddy, Prediction of Micro-stresses and interfacial Tractions in Boron Carbide/AA6061 Alloy Metal Matrix Composites, 1st International Conference on Composite Materials and Characterization, Bangalore, pp.183-185, March, 1997

 A. Chennakesava Reddy; Y.J. Rao, Bio-gas from an industrial waste, Energy for Sustainable Development, ISBN No.0973-0826, Vol No.3, Issue No.1, pp.41-43, Elsevier, 1996

A. Chennakesava Reddy, Effect of Lithium Addition in 8090 Aluminum Alloy on Strengthening Mechanisms and Wear Behavior of New Generation Aerospace Alumina Nanoparticle Metal Matrix, Indian Foundry Journal, ISBN No.0379-5446, Vol No.63, Issue No.9, pp.23-33, September, 2017

B. M. Angadi; A. Chennakesava Reddy; V. Auradi; V.V. Nagathan; S. A. Kori, Effects of individual Titanium and Combined Additions of titanium-Boron on Microstrucutre and Mechanical Properties of Hypereutectic Al-SI Alloys, Indian Foundry Journal, ISBN No.0379-5446, Vol No.63, Issue No.1, pp.21-28, Institute of Indian Foundrymen, January, 2017

B. M. Angadi; A. Chennakesava Reddy; V. Auradi; V.V. Nagathan; S. A. Kori, Effect of Phosphorous Addition on Friction-Interface Temperature and wear Behaviour of Hypereutectic Al-Si Alloys, Indian Foundry Journal, ISBN No.0379-5446, Vol No.62, Issue No.12, pp.56-66, Institute of Indian Foundrymen, December, 2016

S. Pichi Reddy; B. Ramana; A. Chennakesava Reddy, Sintering Characteristics of Al-Pb/Fly-Ash Metal Matrix Composites, Transactions Indian Institute Metals, ISBN No.0972-2815 , Vol No.66, Issue No.1, pp.87-95, Indian Institute of Metals, 2013

A. Chennakesava Reddy, Evaluation of mechanical behavior of Al-alloy/SiC metal matrix composites with respect to their constituents using Taguchi techniques, i-manager's Journal of Mechanical Engineering, ISBN No.2230-9055, Vol No.1, Issue No.2, pp.31-41, i-manager publications, 2011

J.N. Malleswara Rao; A. Chennakesava Reddy; P.V. Rama Rao, Experimental investigation of the influence of burnishing tool passes on surface and hardness of brass specimens, Indian journal of Science & Technology, ISBN No.0974-5645, Vol No.4, Issue No.9, pp.1113-1118, Informatics (India) Ltd, 2011

A. Chennakesava Reddy, B. Kotiveerachari, Influence of microstructural changes caused by ageing on wear behaviour of Al6061/SiC composites, Journal of Metallurgy & Materials Science, ISBN No.0972-4257, Vol No.53, Issue No.1, pp.31-39, National Metallurgical Laboratory, 2011

A. Chennakesava Reddy, Effects of filler wire and current on the joining characteristics of Al-Li-Cu alloy using TIG welding, Indian Journal of Engineering, Science, & Technology, ISBN No.0973-6255, Vol No.5, Issue No.1, pp.13-15, www.bitsathy.ac.in/ijest, 2011

D.V. Srikanth; K.K. Chaturvedi; A. Chennakesava Reddy, Variation of tilting stiffness with pad deformation in a large thrust bearing, Journal of Tribology Research, ISBN No.2249-3786, Vol No.2, Issue No.1, pp.21-38, Serials Publications Pvt. Ltd., 2011

A. Chennakesava Reddy; S. Madahava Reddy, Evaluation of dry sliding wear characteristics and consequences of cast Al-Si-Mg-Fe alloys, ICFAI Journal of Mechanical Engineering, ISBN No.0974-6536, Vol No.3, Issue No.1, pp.1-13, ICFAI University Press, 2010

S. Pitchi Reddy; B. Ramana; A. Chennakesava Reddy, Compacting Characteristics of Al-15%Pb - Flyash Metal Matrix Composites, Journal of Manufacturing Engineering, ISBN No.0973-6867, Vol No.5, Issue No.1, pp.55-59, National Engineering College, 2010

J.N. Malleswara Rao; A. Chennakesava Reddy; P.V. Rama Rao, Design and fabrication of new type dynamometer to measure radial component of cutting force and experimental investigation of optimum force in roller burnishing process, Indian Journal of Science and Technology, ISBN No.0974-5645, Vol No.3, Issue No.7, pp.737-742, Informatics (India) Ltd, 2010

A. Chennakesava Reddy; Essa Zitoun , Matrix Al-alloys for silicon carbide particle reinforced metal matrix composites, Indian Journal of Science and Technology, ISBN No.0974-5645, Vol No.3, Issue No.12, pp.1184-1187, Informatics (India) Ltd, 2010

A. Chennakesava Reddy; Essa Zitoun, Matrix Al-alloys for alumina particle reinforced metal matrix composites, Indian Foundry Journal, ISBN No.0379-5446, Vol No.55, Issue No.1, pp.12-16, Institute of Indian Foundrymen, 2009

S. Madahava Reddy; A. Chennakesava Reddy, Evaluation of process variables on cutting forces and heat generation in high-speed end milling of Al-Si-Mg-Fe alloys, Journal of Manufacturing Technology Today, ISBN No.0972-7396, Vol No.8, Issue No.6, pp.21-29, Central Manufacturing Technology Institute, CMT, 2009

P.S. Ranjit; A. Chennakesava Reddy, Studies on deformation and failure behavior of Ti-6AL-4V alloy for aircraft structures, ICFAI Journal of Mechanical Engineering, ISBN No.0974-6536, Vol No.2, Issue No.3, pp.58-70, ICFAI University Press, 2009

D.V. Srikanth; K.K. Chaturvedi; A.C. Reddy, Theoretical Predictions and Comparison of Oil Film Thickness, Pressure and Dynamic Characteristics of a Tilting Pad Thrust Bearing in Large Vertical Machines, Indian Journal of Tribology, ISBN No.1946-3960, Vol No.4, Issue No.2, pp.30-37, Tribology Society of India, 2009

V. Mahesh; A. Chennakesava Reddy; C.S.P.Rao, Powers of two-based heuristic for job-shop scheduling, ICFAI Journal of Operations and Management, ISBN No.0972-6888, Vol No.7, Issue No.1, pp.16-31, ICFAI University Press, 2008

A. Chennakesava Reddy , Different methods of robotic motion planning for assigning and training paralysed person, Journal of Production Engineering, ISBN No.0257-6708, Vol No.88, Issue No.2, pp.37-41, The Institution of Engineers (India), 2008

V. Mahesh; Sandeep Dulluri; A. Chennakesava Reddy; C.S.P.Rao, Scheduling with processing alternatives: An approach to minimize makesman in a mulit-product manufacturing industry, ICFAI Journal of Operations and Management, ISBN No.0972-6888, Vol No.7, Issue No.4, pp.31-44, ICFAI University Press, 2008

Ch. Rajanna; A. Chennakesava Reddy, Solidification behaviour of Al-Si-Mg alloys in the gravity die-casting process, Indian Foundry Journal, ISBN No.0379-5446, Vol No.53, Issue No.10, pp.29-36, Institute of Indian Foundrymen, 2007

A. Chennakesava Reddy, V.S.R. Murti, S. Sundararajan, Characterization of dip-coating slurries from coal-flyash for investment casting process, Foundry Magazine, ISBN No.R.N. 48491-88, Vol No.18, Issue No.4, pp.51-54, Eight Webcom Pvt. Ltd., 2006

A. Chennakesava Reddy, Evaluation of resonant conditions causing high cycle fatigue in bladed disk assemblies of turbomachines using modal analysis, Journal of Manufacturing Technology Today, ISBN No.0972-7396, Vol No.5, Issue No.8, pp.5-10, Central Manufacturing Technology Institute, CMT, 2006

A. Chennakesava Reddy, Finite element analysis of reverse superplastic blow forming of Ti-Al-4V alloy for optimized control of thickness variation using ABAQUS, Journal of Manufacturing Engineering, ISBN No.0973-6867, Vol No.1, Issue No.1, pp.6-9, National Engineering College, 2006

A. Chennakesava Reddy; S. Sundararajan, Influences of ageing, inclusions and voids on the ductile fracture mechanism of commercial Al-alloys, Journal of Bulletin of Material Sciences, ISBN No.0250-4707, Vol No.28, Issue No.1, pp.75-79, Springer India, 2005

A. Chennakesava Reddy; B. Kotiveerachari; P. Ram Reddy, Dynamic trajectory planning of robot arms, Journal of Manufacturing Technology Today, ISBN No.0972-7396, Vol No.3, Issue No.3, pp.15-18, Central Manufacturing Technology Institute, CMT, 2004

A. Chennakesava Reddy; B. Kotiveerachari; P. Ram Reddy, Finite element analysis of flexibility in mobile robotic manipulators, Journal of Production Engineering, ISBN No.0257-6708, Vol No.85, Issue No.2, pp.27-31, The Institution of Engineers (India), 2004

A. Chennakesava Reddy, Fluidity and microstructural features of Al-alloy weld beads, Engineering Advances, ISBN No.0971-2968, Vol No.15, Issue No.3, pp.28-32, High-Tech Publishing Private Limited, 2003

A. Chennakesava Reddy, Robot and its engineering field applications, Engineering Advances, ISBN No.0971-2968, Vol No.14, Issue No.1, pp.33-35, High-Tech Publishing Private Limited, 2002

A.Chennakesava Reddy; K. Siva Reddy; Ch. Rajanna, The effects of process variables on the dimensional variation of intermediate spacer castings used in the cement mills - A case study, Indian Foundry Journal, ISBN No.0379-5446, Vol No.48, Issue No.3, pp.21-24, Institute of Indian Foundrymen, 2002

A. Chennakesava Reddy, Computational fluid dynamics analysis of flow over a sine wave shaped wall, Journal of Pumps-N-Valves, ISBN No.0972-5733, Vol No.2, Issue No.2, pp.46-47, VBS Marketing Communications Pvt. Ltd., 2002

A. Chennakesava Reddy, Fracture behavior of brittle matrix and alumina trihydrate particulate composites, Indian Journal of Engineering & Materials Sciences , ISBN No.0971-4588, Vol No.9, Issue No.5, pp.365-368, CSIR, 2002

A. Chennakesava Reddy, Reuse of coal- flyash in foundry, Journal of Technology Trends, ISBN No.R.N.MAHENG/2000/1368, Vol No.2, Issue No.1, pp.35-36, VBS Marketing Communications Pvt. Ltd., 2001

A. Chennakesava Reddy; V.S.R. Murti; S. Sundararajan, Bonding mechanism in the coal-flyash ceramic shells, Indian Foundry Journal, ISBN No.0379-5446, Vol No.47, Issue No.4, pp.21-25, Institute of Indian Foundrymen, 2001

A. Chennakesava Reddy; V.S.R. Murti; S. Sundararajan, Control factor design of investment shell mould from coal flyash by Taguchi method, Indian Foundry Journal, ISBN No.0379-5446, Vol No.45, Issue No.4, pp.93-96, Institute of Indian Foundrymen, 1999

A. Chennakesava Reddy, Residual stress measurement of reverse flow formed components by X-ray diffractometer, Engineering Advances, ISBN No.0971-2968, Vol No.11, Issue No.9, pp.54-55, High-Tech Publishing Private Limited, 1999

A. Chennakesava Reddy, Vacuum suction core making process, Journal of Production Engineering, ISBN No.0257-6708, Vol No.79, Issue No.1, pp.37-38, The Institution of Engineers (India), 1998

A. Chennakesava Reddy; V.M. Shamraj, Reduction of cracks in the cylinder liners choosing right process variables by Taguchi method, Foundry Magazine, ISBN No.R.N. 48491-88, Vol No.10, Issue No.4, pp.47-50, Eight Webcom Pvt. Ltd., 1998

A. Chennakesava Reddy; V.S.R. Murti; S. Sundararajan, Some aspects of reducing sediments rate of refractory fillers in the investment casting process, Engineering Advances, ISBN No.0971-2968, Vol No.10, Issue No.8, pp.61-63, High-Tech Publishing Private Limited, 1998

A. Chennakesava Reddy; P. Ramesh Kumar, Analysis of core characteristics in VACM process using response surface methodology, Indian Foundry Journal, ISBN No.0379-5446, Vol No.44, Issue No.9, pp.142-146, Institute of Indian Foundrymen, 1998

A. Chennakesava Reddy , Coal flyash - environmental impact and utilization: A review, Engineering Advances, ISBN No.0971-2968, Vol No.9, Issue No.2, pp.48-49, High-Tech Publishing Private Limited, 1997

A. Chennakesava Reddy; V.S.R.Murti; S. Sundararajan, Regression modelling approach for the analysis of investment shell moulds from coal-flyash, Foundry Magazine, ISBN No.R.N. 48491-88, Vol No.9, Issue No.5, pp.36-40, Eight Webcom Pvt. Ltd., 1997

A. Chennakesava Reddy, Advances in manufacturing of piston rings, Engineering Advances, ISBN No.0971-2968, Vol No.9, Issue No.11, pp.62-66, High-Tech Publishing Private Limited, 1997

A. Chennakesava Reddy; H.B. Niranjan; A.R.V. Murti, Optimization of investment shell mould using colloidal silica binder, Indian Journal of Engineering & Materials Sciences , ISBN No.0971-4588, Vol No.03, Issue No.05, pp.180-184, National Institute of Science Communication and Information Resources (NISCAIR), 1996

A. Chennakesava Reddy, Measuring surface roughness - A simple method, Engineering Advances, ISBN No.0971-2968, Vol No.8, Issue No.10, pp.74-75, High-Tech Publishing Private Limited, 1996

A. Chennakesava Reddy , A method to evaluate surface roughness of as-castings, Indian Foundry Journal, ISBN No.0379-5446, Vol No.42, Issue No.12, pp.28-30, Institute of Indian Foundrymen, 1996

A. Chennakesava Reddy; K.M. Babu; P.M. Jebaraj; M.P. Chowdaiah, Accelerator for faster investment shell making and its effect on the properties of investment moulds, Indian Foundry Journal, ISBN No.0379-5446, Vol No.41, Issue No.10, pp.3-8, Institute of Indian Foundrymen, 1995

B. Govinda Reddy; A. CHennakesava Reddy, Thermo-structural Induced Micromechanical Behaviour of Mo-Coated B 4 C/2024 Al Alloy Nanocomposites, 5th International Conference on High Temperature Applications of Metal Matrix Composites, Pune, India, pp.1-5, April, 2018

B. Govinda Reddy; A. CHennakesava Reddy, High Temperature Micromechanical Behaviour of Mo-Coated B4C/3003 Al Alloy Nanocomposites, 5th International Conference on High Temperature Applications of Metal Matrix Composites, Pune, India, pp.101-104, April, 2018

A. Chennakesava Reddy, Turning of Metal Matrix Composites - A Review, 5th International Conference on High Temperature Applications of Metal Matrix Composites, Pune, India, pp.55-67, April, 2018

A. Chennakesava Reddy, Thermo-compressive Loading on Micromechanical Behaviour of Si3N4 /8090 Al Alloy Nanocomposites, 5th International Conference on High Temperature Applications of Metal Matrix Composites, Pune, India, pp.180-184, April, 2018

A. Chennakesava Reddy, TRIBO-EFFICIENT MATERIALS – A REVIEW, 5th International Conference on High Temperature Applications of Metal Matrix Composites, Pune, India, pp.260-265, April, 2018

A. Chennakesava Reddy, Safety Failure Criteria of Fluorocarbon Plastic Pipes for Dry Chlorine Transport using Finite Element Analysis, International Conference on Advancements in Materials for Manufacturing, Hyderabad, Elsevier, June, 2016

A. Chennakesava Reddy, Estimation of Wear and Thermoelastic Behavior of AA2024/Titanium Diboride Nanoparticle Metal Matrix Composites, 5th International Conference on Materials Processing and Characterization (ICMPC-2016), Hyderabad, Elsevier, March, 2016

A. Chennakesava Reddy, Evaluation of Parametric Significance in Friction Welding Process of AA1100 and Zr705 Alloy using Finite Element Analysis, 5th International Conference on Materials Processing and Characterization (ICMPC-2016), Hyderabad, Elsevier, March, 2016

M. Swaroopa; T. Kishen Kumar Reddy; A. Chennakesava Reddy; Bhaskar Majumdar, CFD Analysis of 2D Transient Melt flow from crucible on to the rotating wheel in Planar Flow Melt Spinning Process, 5th International Conference on Materials Processing and Characterization (ICMPC-2016), Hyderabad, Elsevier, March, 2016

M. Vidya Sagar; A. Chennakesava Reddy, Finite volume analysis of two-stage forging process for aluminium 7075 alloy, International Conference on Advanced Materials and Manufacturing Technologies, JNTUH Hyderabad, ISBN No.9789382163466, pp.228-238, Paramount Publishing House, December, 2014

A. Balaram Naik; A.Chennakesava Reddy, Study of welding economy and Improve productivity of (2205) duplex stainless steel material, International Conference on Advanced Materials and Manufacturing Technologies, JNTUH Hyderabad, ISBN No.9789382163466, pp.19-32, Paramount Publishing House, December, 2014

T. Prasad; A. Chennakesava Reddy; S. Jushkumar, Tensile and fracture behavior of 6061 Al-SiCp metal matrix composites, International Conference on Advanced Materials and Manufacturing Technologies, JNTUH Hyderabad, ISBN No.9789382163466, pp.38-44, Paramount Publishing House, December, 2014

Essa Zitoun; A.Chennakesava Reddy, Metallurgical characteristics of fracture behaviour in Al/SiC metal matrix composite, International Conference on Advanced Materials and Manufacturing Technologies, JNTUH Hyderabad, ISBN No.9789382163466, pp.59-66, Paramount Publishing House, December, 2014

G. Satish Babu; A. Chennakesava Reddy, Fracture behavior of alumina particles reinforced with different matrix aluminium alloys, International Conference on Advanced Materials and Manufacturing Technologies, JNTUH Hyderabad, ISBN No.9789382163466, pp.67-74, Paramount Publishing House, December, 2014

S.Pichi Reddy; P.V.Chandra Sekhar Rao; A.Chennakesava Reddy; G.Parmeswari, Tensile and flexural strength of glass fiber epoxy composites, International Conference on Advanced Materials and Manufacturing Technologies, JNTUH Hyderabad, ISBN No.9789382163466, pp.91-95, Paramount Publishing House, December, 2014

Naresh Baki; A. Chennakesava Reddy; Thella Babu Rao, Selection of optimal process parameters in wire-electrical discharge turning while machining Ti-6Al-4V alloy, International Conference on Advanced Materials and Manufacturing Technologies, JNTUH Hyderabad, ISBN No.9789382163466, pp.136-145, Paramount Publishing House, December, 2014

S.Sreenivasulu; A. chennakeshava Reddy, Thermo-mechanical properties of silicon nitrate ceramic composites for fused deposition modeling, International Conference on Advanced Materials and Manufacturing Technologies, JNTUH Hyderabad, ISBN No.9789382163466, pp.153-166, Paramount Publishing House, December, 2014

P. Laxminarayana; A. Chennakesava Reddy, Influence of heat treatment on mechanical behavior of aluminium- 7075/silcon carbide composites manufactured by squeeze casting process, International Conference on Advanced Materials and Manufacturing Technologies, JNTUH Hyderabad, ISBN No.9789382163466, pp.167-177, Paramount Publishing House, December, 2014

D.V.Srikanth; K.K.Chaturvedi; A.Chenna Keshav Reddy, Mesh independence and convergence test in the oil film characteristics of a tilting pad thrust bearing, International Conference on Advanced Materials and Manufacturing Technologies, JNTUH Hyderabad, ISBN No.9789382163466, pp.207-211, Paramount Publishing House, December, 2014

G. Devendar; K. Shiva Kumar; A. Chennakesava Reddy, Modification of gating system for proper mould filling of bracket casting using procast, International Conference on Advanced Materials and Manufacturing Technologies, JNTUH Hyderabad, ISBN No.9789382163466, pp.230-234, Paramount Publishing House, December, 2014

A. Chennakesava Reddy, Difference between Denavit - Hartenberg (D-H) classical and modified conventions for forward Kinematics of robots with case study, International Conference on Advanced Materials and Manufacturing Technologies, JNTUH Hyderabad, ISBN No.9789382163466, pp.249-266, Paramount Publishing House, December, 2014

A. Chennakesava Reddy, Effect of Phase Transformation from h-BN to c-BN on Nanoparticle Fracture Tendency in AA8090/h-BN Particle-Reinforced Metal Matrix Composites, 5th International Conference on Modern Materials and Manufacturing, Bangalore, pp.365-372, December, 2013

A. Chennakesava Reddy, Combined Loading and Micromechanical Analysis of AA5050 Alloy-Silicon Oxide Particle-Reinforced Metal Matrix Composites, 5th International Conference on Modern Materials and Manufacturing, Bangalore, pp.373-378, December, 2013

M. Mastanaih; A. Chennakesava Reddy, Exploitation of Reinforcement in Revision of Wear Behavior of AA1100/Si3N4 Metal Matrix Composites, 5th International Conference on Modern Materials and Manufacturing, Bangalore, pp.379-383, December, 2013

M. Mastanaih; A. Chennakesava Reddy, Influence of Reinforcing Particle Size on Tribological Properties of AA6061-Titanium Carbide Microcomposites, 5th International Conference on Modern Materials and Manufacturing, Bangalore, pp.389-393, December, 2013

V. K. Reddy; A. Chennakesava Reddy, Role of Reinforcing Particle Size in the Wear Behavior of AA6061-Titanium Nitride Composites, 5th International Conference on Modern Materials and Manufacturing, Bangalore, pp.394-398, December, 2013

V. B. Reddy; A. Chennakesava Reddy, Sliding Wear by Hard and Micro-Particles of AA2024-Zirconium Carbide Metal Matrix Composites, 5th International Conference on Modern Materials and Manufacturing, Bangalore, pp.399-403, December, 2013

T. K. K. Reddy; A. Chennakesava Reddy, Wear Performance of Magnesia as Reinforcement of AA2024 Metal Matrix Composites, 5th International Conference on Modern Materials and Manufacturing, Bangalore, pp.404-408, December, 2013

A. Chennakesava reddy, Study of Factors Influencing Sliding Wear Behavior of Hexagonal Boron Nitride Reinforced AA6061 Metal Matrix Composites, 5th International Conference on Modern Materials and Manufacturing, Bangalore-409, 413, December, 2013

T. K. K. Reddy; A. Chennakesava Reddy, Tribological Behavior of AA8090/SiC Composites, 2nd International Conference on Thermal and Tribological Behavior of Composites, New Delhi, pp.149-154, December, 2013

V. K. Reddy; A. Chennakesava Reddy, Wear performance of AA4015/Boron Carbide Metal Matrix Composites, 5th International Conference on Modern Materials and Manufacturing, Bangalore, pp.384-388, December, 2013

A. Chennakesava Reddy, Tribological Behavior of Nano Titanium Carbide Particles Embedded in 8090 AL alloy Metal Matrix Composites, 2nd International Conference on Thermal and Tribological Behavior of Composites, New Delhi, pp.155-160, December, 2013

B. V. S. Rao; A. Chennakesava Reddy, Investment Casting of Cellular Structures from 60 NiTiNOL Shape Memory Alloy, 5th International Conference on Modern Materials and Manufacturing, Bangalore, pp.96-99, December, 2013

A. Chennakesava Reddy, Thermal Expansion of Al Matrix Composites Reinforced with TiN Nanoparticles, 2nd International Conference on Thermal and Tribological Behavior of Composites, New Delhi, pp.144-148, December, 2013

T. Prasad; A. Chennakesava Reddy; S. Madhava Reddy; N. Arjun, Experimental investigation of mechanical behaviour of glass-epoxy composites, International Conference on Recent Advances in Material Processing Technology, Kovilpatti, January, 2013

B.M. Angadi; S.A. Kori; A. Chennakesava Reddy, Investigation of Optimum Addition of Phosphorous for the Refinement of Primary Silicon in Hypereutectic Al-20 Si and its Effects on Microstructure and Mechanical Properties, International Conference on Challenges and Opportunities in Mechanical Engineering, Industrial Engineering and Management Studies (ICCOMIM - 2012), pp.513-516, July, 2012

M. S. Ramgir; A. Chennakesava Reddy, Effect of Thermal-heating on Nanoparticle Fracture Trend in AA2024/c-BN Particle-Reinforced Metal Matrix Composites, 4th International Conference on Modern Materials and Manufacturing, Chennai, pp.305-308, December, 2012

M. S. Ramgir; A. Chennakesava Reddy, Effect of Thermo-Tensile Loading on Micromechanical Behavior of AA6061 Alloy-Titanium Carbide Composites, 4th International Conference on Modern Materials and Manufacturing, Chennai, pp.309-313, December, 2012

R. G. Math; A. Chennakesava Reddy, Tribological Performance of AA3003/B4C Metal Matrix Composites, 4th International Conference on Modern Materials and Manufacturing, Chennai, pp.314-318, December, 2012

P. Ram Reddy; A. Chennakesava Reddy, Microcasting of Mg-Ti alloys and their Wettability in Phosphate Bonded Investment Shell Molds, 4th International Conference on Modern Materials and Manufacturing, Chennai, pp.112-115, December, 2012

M. Mastanaih; A. Chennakesava Reddy, Three-Body Wear Behavior of AA1100/ZrC Metal Matrix Composites, 4th International Conference on Modern Materials and Manufacturing, Chennai, pp.319-323, December, 2012

V. K. Reddy; A. Chennakesava Reddy, Influence of Matrix Alloy and Si3N4 Nanoparticle on Wear Characteristics of Aluminum Alloy Composites, 4th International Conference on Modern Materials and Manufacturing, Chennai, pp.324-328, December, 2012

M. Mastanaih; A. Chennakesava Reddy, Implication of Macro-sized Silicon Oxide Particles on Wear Rate of AA2024Alloy Metal Matrix Composites, 4th International Conference on Modern Materials and Manufacturing, Chennai, pp.334-338, December, 2012

R. G. Math; A. Chennakesava Reddy, Inference of Macro-particles on Wear Rate of AA2024/TiO2 Metal Matrix Composites, 4th International Conference on Modern Materials and Manufacturing, Chennai, pp.329-333, December, 2012

V. K. Reddy; A. Chennakesava Reddy, Tribological Investigation of Particle Size Effect on Wear Rate of Zirconium Oxide Microcomposites, 4th International Conference on Modern Materials and Manufacturing, Chennai, pp.339-343, December, 2012

A. Chennakesava Reddy, Application of Factorial Techniques to Validate Wear Model of AA2024-Graphite Microcomposites, 4th International Conference on Modern Materials and Manufacturing, Chennai, pp.344-348, December, 2012

A. S. Goud; A. Chennakesava Reddy, Evaluation of Nanoparticle Fracture in MgO Reinforced Aluminum matrix composites, 3rd International Conference on Modern Materials and Manufacturing, New Delhi, pp.320-324, December, 2011

A. S. Goud; A. Chennakesava Reddy, Interface Failure Analysis of TiB2 Reinforced Aluminum Alloy Matrix Composites, 3rd International Conference on Modern Materials and Manufacturing, New Delhi, pp.325-328, December, 2011

M. S. Ramgir; A. Chennakesava Reddy, Control of B4C Reinforced Particulates on Dry Wear Resistance of AA2024/B4C Composites, 3rd International Conference on Modern Materials and Manufacturing, New Delhi, pp.336-340, December, 2011

V. K. Reddy; A. Chennakesava Reddy, Mathematical Models for Dry Wear of H18 Heat Treated AA1100/TiB2 Composites, 3rd International Conference on Modern Materials and Manufacturing, New Delhi, pp.341-346, December, 2011

A. Chennakesava Reddy, Experimental Validation of Dry Wear Formulation of AA7020/Zirconia Nanoparticle Metal Matrix Composites, 3rd International Conference on Modern Materials and Manufacturing, New Delhi, pp.357-361, December, 2011

A. Chennakesava Reddy, Impact of Particle Size on Dry Wear Formulation of AA2024/Titanium Nitride Macro-particle Metal Matrix Composites, 3rd International Conference on Modern Materials and Manufacturing, New Delhi, pp.362-366, December, 2011

M. Mastanaiah; A. Chennakesava Reddy, Abrasive Wear of AA3003/ZrC Composites, 3rd International Conference on Modern Materials and Manufacturing, New Delhi, pp.347-351, December, 2011

V. K. Reddy; A. Chennakesava Reddy, Unlubricated Sliding of AA4015/TiB2 Metal Matrix Composites, 3rd International Conference on Modern Materials and Manufacturing, New Delhi, pp.352-356, December, 2011

S. Madhava Reddy; A. Chennakesava Reddy, Effect of process parameters on surface roughness in high-speed end milling of Al - alloy, 3rd International Conference on Advances in Mechanical Engineering, Surat, January, 2010

Y. S. A. Kumar; A. Chennakesava Reddy, Interfacial Criterion for Debonding of Titanium Boride/AA4015 Metal Matrix Composites, 2nd International Conference on Modern Materials and Manufacturing, Pune, pp.265-268, December, 2010

Y. S. A. Kumar; A. Chennakesava Reddy, Fabrication and Properties of AA7020-TiN Composites under Combined Loading of Temperature and Tension, 2nd International Conference on Modern Materials and Manufacturing, Pune, pp.276-280, December, 2010

G. V. R. Kumar; A. Chennakesava Reddy, Wear Equations for AA7020-MgO Composites Sliding Against En32 Steel Disc, 2nd International Conference on Modern Materials and Manufacturing, Pune, pp.294-300, December, 2010

M. Mastanaiah; A. Chennakesava Reddy, Appraisal of Orthopedic Implant Co-Cr-Mo Alloy Cast by Counter-Gravity in Graphite Investment Shell Moulds, 2nd International Conference on Modern Materials and Manufacturing, Pune, pp.121-124, December, 2010

R. G. Math; A. Chennakesava Reddy, Sliding Wear of AA7020/MgO Composites against En32 Steel Disc, 2nd International Conference on Modern Materials and Manufacturing, Pune, pp.281-286, December, 2010

G. V. R. Kumar; A. Chennakesava Reddy, Tribological Analogy of Cast AA2024/TiB2 Composites, 2nd International Conference on Modern Materials and Manufacturing, Pune, pp.287-291, December, 2010

V. K. Reddy; A. Chennakesava Reddy, Gypsum Bonded Investment Moulds for Microcasting of Gold Alloy Using for Inlay Dental Applications, 2nd International Conference on Modern Materials and Manufacturing, Pune, pp.125-129, December, 2010

A. Chennakesava Reddy, Hardness Contours and Worn Surfaces of AA1100 Alloy/TiO2 Metal Matrix Composites, 2nd International Conference on Modern Materials and Manufacturing, Pune, pp.292-296, December, 2010

R. G. Math; A. Chennakesava Reddy, Hardness Patterns on Worn Surfaces of AA7020 Alloy/SiO2 Particulate Metal Matrix Composites, 2nd International Conference on Modern Materials and Manufacturing, Pune, pp.297-301, December, 2010

G. V. R. Kumar; A. Chennakesava Reddy, Surface Profiles of Dry Worn Surfaces of AA2024 Alloy/TiC Metal Matrix Composites, 2nd International Conference on Modern Materials and Manufacturing, Pune, pp.302-306, December, 2010

A. Chennakesava Reddy, Correlation of Surface Profiles and Worn Surfaces of AA6061/Graphite Metal Matrix Composites, 2nd International Conference on Modern Materials and Manufacturing, Pune, pp.307-311, December, 2010

Ch. Rajanna; A. Chennakesava Reddy, Characterization of Elektron 21- an Aerospace Magnesium Alloy Cast by Counter-Gravity in Magnesia Mixed Fused Silica Investment Shell Moulds, 7th International Conference on Composite Materials and Characterization, Bangalore, pp.126-129, December, 2009

A. Chennakesava Reddy, Microstructural Assessment of Biocompatible TNZT Alloy Cast by Counter-Gravity in Yttria Doped Titania Investment Shell Moulds, 7th International Conference on Composite Materials and Characterization, Bangalore, pp.130-135, December, 2009

Ch. Rajanna; A. Chennakesava Reddy, Hydrodynamic Mode of Bronze Sleeve Bearings Cast by Counter-Gravity in Calcite Investment Shell Moulds, 7th International Conference on Composite Materials and Characterization, Bangalore, pp.136-141, December, 2009

A. Chennakesava Reddy, Microcasting of Ti-Alloy Using Phosphate Bonded Investment Moulds for Dental Applications, 7th International Conference on Composite Materials and Characterization, Bangalore, pp.142-146, December, 2009

A. Chennakesava Reddy , Sliding Wear and Micromechanical Behavior of AA1100/Titanium Oxide Metal Matrix Composites Cast by Bottom-Up Pouring, 7th International Conference on Composite Materials and Characterization, Bangalore, pp.205-210, December, 2009

S. Pitchi Reddy; A. Chennakesava Reddy, Synthesis and Characterization of Zirconium Carbide Nanoparticles Reinforced AA2024 Alloy Matrix Composites Cast by Bottom-Up Pouring, 7th International Conference on Composite Materials and Characterization, Bangalore, pp.211-215, December, 2009

Essa Zitoun; A. Chennakesava Reddy, Analysis of Micromechanical Behavior of AA3003 Alloy - Graphite Metal Matrix Composites Cast by Bottom-Up Pouring with Regard to Agglomeration and Porosity, 7th International Conference on Composite Materials and Characterization, Bangalore, pp.216-220, December, 2009

P. Rami Reddy; A. Chennakesava Reddy, Processing of AA4015-Zirconium Oxide Particulate Metal Matrix Composites by Stir Casting Technology, 7th International Conference on Composite Materials and Characterization, Bangalore, pp.221-224, December, 2009

D.V.Srikanth; K.K.Chaturvedi; A.Chenna Keshav Reddy, Evaluation of tilting pad thrust bearing stiffness and damping characteristics, 6th International Conference on Industrial Tribology, New Delhi, November, 2008

A. Chennakesava Reddy, Influence of Agglomeration of Nanoparticles on Tensile Strength and Wear Rate of AA6061/Graphite Metal Matrix Composites, 1st International Conference on Thermal and Tribological Behavior of Composites, Bangalore, pp.144-155, December, 2008

A. Chennakesava Reddy, Strength and fracture mechanisms in carbon-carbon composites, International symposium on Advanced Materials and Processing, Bagalkot, pp.138-144, October, 2007

A. Chennakesava Reddy, Role of Porosity and Clustering on Performance of AA1100/Boron Carbide Particle-Reinforced Metal Matrix Composites, 6th International Conference on Composite Materials and Characterization, Hyderabad, pp.122-127, June, 2007

P. Rami Reddy; A. Chennakesava Reddy, Formation of Gas Porosity and Clustering in Stir Cast AA2024/Titanium Diboride Particle-Reinforced Metal Matrix Composites and Influence on Micromechanical Properties, 6th International Conference on Composite Materials and Characterization, Hyderabad, pp.128-132, June, 2007

P. Rami Reddy; A. Chennakesava Reddy, Structure and Properties of Liquid Metal Processed Zirconium Oxide Reinforced AA3003 Alloy, 6th International Conference on Composite Materials and Characterization, Hyderabad, pp.133-138, June, 2007

A. C. S. Kumar; A. Chennakesava Reddy, Processing of AA4015-Silicon Oxide Particulate Metal Matrix Composites by Stir Casting Technology, 6th International Conference on Composite Materials and Characterization, Hyderabad, pp.139-143, June, 2007

A. C. S. Kumar; A. Chennakesava Reddy, Microstructural and Numerical Evaluation of Porosity and Clustering Control over Micromechanical Properties of Cast Titanium Nitride Reinforced AA5050 Alloy, 6th International Conference on Composite Materials and Characterization, Hyderabad, pp.144-148, June, 2007

A. Chennakesava Reddy, Effect of Clustering Induced Porosity on Micromechanical Properties of AA6061/Titanium Oxide Particulate Metal matrix Composites, 6th International Conference on Composite Materials and Characterization, Hyderabad, pp.149-154, June, 2007

S. Satyanarayana; A. Chennakesava Reddy, Occurrence of Agglomeration and Porosity during High pressure Die Casting of AA8090/Graphite Particulate Metal matrix Composites, 6th International Conference on Composite Materials and Characterization, Hyderabad, pp.160-164, June, 2007

D.V.R. Murty; A. Chennakesava Reddy; Y. Bhaskar Rao, Factors to be considered for selection & design of rupture disc, 14th International Conference on Nuclear Engineering, Miami, Florida, ICONE14-89634, July, 2006

V. Mahesh; A. Chennakesava Reddy; C.S.P.Rao, Integration of process planning and scheduling for a multi product manufacturing system, 22nd International Conference on CAD/CAM Robotics and Factories of the Future, Vellore , pp.893-901, July, 2006

A. Chennakesava Reddy; P. Ram Reddy; B. Kotiveerachari, Studies on the effect of vibration of robot links on the end point trajectory path using CAD, International Conference on Recent Advances in Material Processing Technology, Kovilpatti, pp.195-202, February, 2005

B. Balu Naik; A. Chennakesava Reddy; T. Kishen Kumar Reddy, Finite element analysis of some fracture mechanisms, International Conference on Recent Advances in Material Processing Technology, Kovilpatti, pp.265-270, February, 2005

S. Madhava Reddy; A. Chennakesava Reddy, Sensing tool breakage in face milling operations using neural networks approach, International Conference on Recent Advances in Material Processing Technology, Kovilpatti, pp.119-124, February, 2005

A. Chennakesava Reddy; P. Ram Redd; B. Kotiveerachari, Optimization of robot arm path planning without collision in its workspace using genetic algorithm, International Conference on Emerging Technologies in Intellectual System and Control, Coimbatore, pp.1-7, January, 2005

A. Chennakesava Reddy; B. Kotiveerachari, Parametric optimization of RPT- fused deposition modeling using fuzzy logic control algorithm, International Conference on Systemics Cybernetics and Informatics, Hyderabad, pp.289-293, February, 2004

A. Chennakesava Reddy, Evaluation of surface roughness using image processing technique, International Conference on Systemics Cybernetics and Informatics, Hyderabad, pp.571-573, February, 2004

A. Chennakesava Reddy; B. Rajashekar Reddy, Evaluation of various microstrucutral characteristics of alloys using image processing techniques, International Conference on Systemics Cybernetics and Informatics, Hyderabad, pp.574-577, February, 2004

A. Chennakesava Reddy, Thermal Expansion Studies on Aluminum Matrix Composites with Different Reinforcement Volume Fractions of Si3N4 Nanoparticles, 4th International Conference on Composite Materials and Characterization, Hyderabad, pp.221-225, March, 2003

A. Chennakesava Reddy, On the Wear of AA4015 – Fused Silica Metal Matrix Composites, 4th International Conference on Composite Materials and Characterization, Hyderabad, pp.226-230, March, 2003

S. Madhav Reddy; A. Chennakesava Reddy, Clustering in Zirconium Oxide/AA1100 Alloy Particle-Reinforced Metal Matrix Composites, 4th International Conference on Composite Materials and Characterization, Hyderabad, pp.182-187, March, 2003

S. Madhav Reddy; A. Chennakesava Reddy, Effect of Particle Clustering on Micromechanical Properties of Boron Nitride/AA3003 Alloy Particle-Reinforced Metal Matrix Composites, 4th International Conference on Composite Materials and Characterization, Hyderabad, pp.188-192, March, 2003

P. Laxminarayana; A. Chennakesava Reddy, Numerical Investigation of the Effect of Particle Clustering on the Micromechanical Properties of Titanium Nitride/AA4015 Alloy Particle-Reinforced Metal Matrix Composites, 4th International Conference on Composite Materials and Characterization, Hyderabad, pp.193-196, March, 2003

P. Laxminarayana; A. Chennakesava Reddy, Effect of Particle Spatial Distribution and Clustering on Tensile Behavior of Titanium Oxide/AA5050 Alloy Particle Reinforced Composites, 4th International Conference on Composite Materials and Characterization, Hyderabad, pp.197-201, March, 2003

Essa Zitoun; A. Chennakesava Reddy, Agglomeration of Nanoparticles into Network Aggregates in Zirconium Carbide/AA6061 Alloy Particle Reinforced Composites, 4th International Conference on Composite Materials and Characterization, Hyderabad, pp.202-205, March, 2003

A. Chennakesava Reddy, Finite Element Analysis Study of Micromechanical Clustering Characteristics of Graphite/AA7020 Alloy Particle Reinforced Composites, 4th International Conference on Composite Materials and Characterization, Hyderabad, pp.206-210, March, 2003

Essa Zitoun; A. Chennakesava Reddy, Unit Cell Models for Clustering of Particles embedded in MgO Particle/AA8090 Alloy Metal Matrix Composites, 4th International Conference on Composite Materials and Characterization, Hyderabad, pp.211-215, March, 2003

A. Chennakesava Reddy, Investigation of the Clustering Behavior of Titanium Diboride Particles in TiB2/AA2024 Alloy Metal Matrix Composites, 4th International Conference on Composite Materials and Characterization, Hyderabad, pp.216-220, March, 2003

A. Chennakesava Reddy, On the Wear of AA4015 – Fused Silica Metal Matrix Composites, 4th International Conference on Composite Materials and Characterization, Hyderabad, pp.226-230, March, 2003

H. B. Niranjan; A. Chennakesava Reddy, Computational Modeling of Interfacial Debonding in Fused Silica/AA7020 Alloy Particle-Reinforced Metal Matrix Composites, 3rd International Conference on Composite Materials and Characterization, Chennai, pp.222-227, May, 2001

A. Chennakesava Reddy, Prediction of CTE of Al/TiB2 Metal Matrix Composites, 3rd International Conference on Composite Materials and Characterization, Chennai, pp.270-275, May, 2001

H. B. Niranjan; A. Chennakesava Reddy, Nanoscale Characterization of Interfacial Debonding and Matrix Damage in Titanium Carbide/AA8090 Alloy Particle-Reinforced Metal Matrix Composites, 3rd International Conference on Composite Materials and Characterization, Chennai, pp.228-233, May, 2001

A. Chennakesava Reddy, Significance of Testing Parameters on the Wear Behavior of AA1100/B4C Metal Matrix Composites based on the Taguchi Method, 3rd International Conference on Composite Materials and Characterization, Chennai, pp.276-280, May, 2001

S. Sundara Rajan; A. Chennakesava Reddy, Assessment of Temperature Induced Fracture in Boron Nitride/AA1100 Alloy Particle-Reinforced Metal Matrix Composites, 3rd International Conference on Composite Materials and Characterization, Chennai, pp.234-239, May, 2001

S. Sundara Rajan; A. Chennakesava Reddy, Estimation of Fracture in Zirconia/AA2024 Alloy Particle-Reinforced Composites Subjected to Thermo-Mechanical Loading, 3rd International Conference on Composite Materials and Characterization, Chennai, pp.240-245, May, 2001

P. M. Jebaraj; A. Chennakesava Reddy, Finite Element Predictions for the Thermoelastic Properties and Interphase Fracture of Titanium Nitride /AA3003 Alloy Particle-Reinforced Composites, 3rd International Conference on Composite Materials and Characterization, Chennai, pp.246-251, May, 2001

P. M. Jebaraj; A. Chennakesava Reddy, Effect of Thermo-Mechanical Loading on Interphase and Particle Fractures of Titanium Oxide /AA4015 Alloy Particle-Reinforced Composites, 3rd International Conference on Composite Materials and Characterization, Chennai, pp.252-256, May, 2001

A. Chennakesava Reddy, Effect of CTE and Stiffness Mismatches on Interphase and Particle Fractures of Zirconium Carbide /AA5050 Alloy Particle-Reinforced Composites, 3rd International Conference on Composite Materials and Characterization, Chennai, pp.257-262, May, 2001

A. Chennakesava Reddy, Behavioral Characteristics of Graphite /AA6061 Alloy Particle-Reinforced Metal Matrix Composites, 3rd International Conference on Composite Materials and Characterization, Chennai, pp.263-269, May, 2001

A. Chennakesava Reddy, Cohesive Zone Finite Element Analysis to Envisage Interface Debonding in AA7020/Titanium Oxide Nanoparticulate Metal Matrix Composites, 2nd International Conference on Composite Materials and Characterization, Nagpur-204, 209, April, 1999

B. Kotiveera Chari; A. Chennakesava Reddy, Interfacial Debonding Analysis in Nanoparticulate Reinforced Metal Matrix Composites of AA8090/Zirconium Carbide, 2nd International Conference on Composite Materials and Characterization, Nagpur, pp.210-214, April, 1999

B. Kotiveera Chari; A. Chennakesava Reddy, Effect of Debonding on Overall Behavior of AA3003/Titanium Carbide Nanoparticulate Reinforced Metal Matrix Composites, 2nd International Conference on Composite Materials and Characterization, Nagpur, pp.220-224, April, 1999

P. M. Jebaraj; A. Chennakesava Reddy, Analysis of Debonding along Interface of AA4015/Magnesium Oxide Nanoparticulate Reinforced Metal Matrix Composites, 2nd International Conference on Composite Materials and Characterization, Nagpur, pp.225-229, April, 1999

H. B. Niranjan; A. Chennakesava Reddy, Effect of Particulate Debonding in AA5050/Boron Nitride Nanoparticulate Reinforced Metal Matrix Composites, 2nd International Conference on Composite Materials and Characterization, Nagpur, pp.230-234, April, 1999

P. M. Jebaraj; A. Chennakesava Reddy, Interface Debonding Prediction Technique for Tensile Loaded AA6061/Zirconium Oxide Nanoparticulate MMC, 2nd International Conference on Composite Materials and Characterization, Nagpur, pp.235-239, April, 1999

S. Sundara Rajan; A. Chennakesava Reddy, FEM Model for Volume Fraction Dependent Interface Debonding in TiN Nanoparticle Reinforced AA7020 Metal Matrix Composites, 2nd International Conference on Composite Materials and Characterization, Nagpur, pp.240-244, April, 1999

A. Chennakesava Reddy, Micromechanical Modelling of Interfacial Debonding in AA1100/Graphite Nanoparticulate Reinforced Metal Matrix Composites, 2nd International Conference on Composite Materials and Characterization, Nagpur, pp.249-253, April, 1999

S. Sundara Rajan; A. Chennakesava Reddy, Deformation Behavior of AA8090/ TiO2 Nanoparticulate Reinforced Metal Matrix Composites with Debonding Interfaces, 2nd International Conference on Composite Materials and Characterization, Nagpur, pp.245-248, April, 1999

H. B. Niranjan; A. Chennakesava Reddy, Debonding Failure and Volume Fraction Effects in Nano-reinforced Composites of AA2024/Silicon Oxide, 2nd International Conference on Composite Materials and Characterization, Nagpur, pp.215-219, April, 1999

S. Sundara Rajan; A. Chennakesava Reddy, Evaluation of Tensile Behavior of Boron Carbide/AA1100 Alloy Metal Matrix Composites, 1st International Conference on Composite Materials and Characterization, Bangalore, pp.156-159, March, 1997

S. Sundara Rajan; A. Chennakesava Reddy, Assessment of Tensile Behavior of Boron Carbide/AA2024 Alloy Metal Matrix Composites, 1st International Conference on Composite Materials and Characterization, Bangalore, pp.160-163, March, 1997

P. Martin Jebaraj; A. Chennakesava Reddy, Prediction of Tensile Behavior of Boron Carbide/AA3003 Alloy Metal Matrix Composites, 1st International Conference on Composite Materials and Characterization, Bangalore, pp.164-166, March, 1997

A. Chennakesava Reddy, Effect of Particle Loading on Microealstic Behavior and interfacial Tractions of Boron Carbide/AA4015 Alloy Metal Matrix Composites, 1st International Conference on Composite Materials and Characterization, Bangalore, pp.176-179, March, 1997

B. Kotiveera Chari; A. Chennakesava Reddy, Estimation of Micro-stresses and interfacial Tractions in Boron Carbide/AA5050 Alloy Metal Matrix Composites, 1st International Conference on Composite Materials and Characterization, Bangalore, pp.180-182, March, 1997

B. Kotiveera Chari; A. Chennakesava Reddy, Computation of Micro-stresses and interfacial Tractions in Boron Carbide/AA7020 Alloy Metal Matrix Composites, 1st International Conference on Composite Materials and Characterization, Bangalore, pp.186-188, March, 1997

H. B. Niranjan; A. Chennakesava Reddy, Valuation of Micro-stresses and interfacial Tractions in Boron Carbide/AA8090 Alloy Metal Matrix Composites, 1st International Conference on Composite Materials and Characterization, Bangalore, pp.189-191, March, 1997

H. B. Niranjan; A. Chennakesava Reddy, Determination of Micro-stresses and interfacial Tractions in Titanium Boride/AA1100 Alloy Metal Matrix Composites, 1st International Conference on Composite Materials and Characterization, Bangalore, pp.192-194, March, 1997

A. Chennakesava Reddy, Reckoning of Micro-stresses and interfacial Tractions in Titanium Boride/AA2024 Alloy Metal Matrix Composites, 1st International Conference on Composite Materials and Characterization, Bangalore, pp.195-197, March, 1997

A. Chennakesava Reddy, Bio-gas from coir-pith, X-International congress and Exhibition on Non-conventional Energy Sources - 2000, New Delhi, pp.292-293, December, 1996

S. Madhava Reddy; A. Chennakesava Reddy; K. Sudhakar Reddy; T. Prasad, Sliding wear characteristics of Al-Si-Mg-Fe alloys, International Conference on Recent Advances in Material Processing Technology, Kovilpatti, pp.1-6, January, 2013

A. Chennakesava Reddy, Consistency prediction of bursting strength of 317 stainless steel pipes based on PCORRC(Batelle) criterion, National Conference on Excellence in Manufacturing and Service Organizations: The Six Sigma Way , pp.105-108, JNT University, Hyderabad, August, 2010

A. Chennakesava Reddy, Reliable forecasting of remaining strength of petroleum pipelines based on LG-18 criterion, National Conference on Excellence in Manufacturing and Service Organizations: The Six Sigma Way , pp.109-111, JNT University, Hyderabad, August, 2010

A. Chennakesava Reddy, Decent prophecy of bursting strength of natural gas pipelines based on modified ASME B31G criterion, National Conference on Excellence in Manufacturing and Service Organizations: The Six Sigma Way , pp.112-115, JNT University, Hyderabad, August, 2010

M. S. Rao; A. C. Reddy, Fluidity assessment of 6xxx alloys in magnesia investment shell moulds, National Conference on Excellence in Manufacturing and Service Organizations: The Six Sigma Way , pp.325-327, JNT University, Hyderabad, August, 2010

A. Chennakesava Reddy, Counter-Gravity Casting of IN625 Alloy in Thin-walled Investment Shell Moulds, 6th National Conference on Materials and Manufacturing Processes, Hyderabad, pp.54-57, August, 2008

Ch. Rajanna; A. Chennakesava Reddy, Effect of Refractory Filler Materials on Defect Formation in Investment Cast Ni-Base Super Alloy, 6th National Conference on Materials and Manufacturing Processes, Hyderabad, pp.58-61, August, 2008

P. Laxminarayana; A. Chennakesava Reddy, Quantification of Delta Ferrite in Austenitic Stainless Steel Cast in Investments Shell Moulds, 6th National Conference on Materials and Manufacturing Processes, Hyderabad, pp.62-65, August, 2008

S. Madhav Reddy; A. Chennakesava Reddy, Effect of Strontium on Surface Modification of Al-Si Alloys Cast in Investments Shell Moulds, 6th National Conference on Materials and Manufacturing Processes, Hyderabad, pp.66-69, August, 2008

B. Kotiveera Chari; A. Chennakesava Reddy, Bottom-Up Pouring and its Effect on Porosity and Clustering in Casting of AA1100/Silicon Nitride Particle-Reinforced Metal Matrix Composites, 6th National Conference on Materials and Manufacturing Processes, Hyderabad, pp.110-114, August, 2008

Essa Zitoun; A. Chennakesava Reddy, Microstructure-Property Relationship of AA3003/Boron Nitride Particle-Reinforced Metal Matrix Composites Cast by Bottom-Up Pouring, 6th National Conference on Materials and Manufacturing Processes, Hyderabad, pp.115-119, August, 2008

A. Chennakesava Reddy, Wear and Mechanical Behavior of Bottom-Up Poured AA4015/Graphite Particle-Reinforced Metal Matrix Composites, 6th National Conference on Materials and Manufacturing Processes, Hyderabad, pp.120-126, August, 2008

S. Pitchi Reddy; A. Chennakesava Reddy, Effect of Needle-like Brittle Intermetallic Phases on Fracture Behavior of Bottom-up Poured AA5050/Titanium Carbide Particle-Reinforced Metal Matrix Composites, 6th National Conference on Materials and Manufacturing Processes, Hyderabad, pp.127-132, August, 2008

V. Mahesh; A. Chennakesava Reddy; C.S.P Rao, Machine load balancing under finite capacity settings in a job shop environment, National Seminar on Emerging Trends in Manufacturing Systems and Technologies, Hyderabad, pp.453-457, September, 2007

A. Chennakesava Reddy, Discretization errors in finite element analysis of non-linear 2-D structural problems with large strains and plasticity, Two-Day National Level Seminar on FEM and Its Application to Non Linear Problems, Kurnool, pp.25-36, January, 2006

A. Chennakesava Reddy, Effect of TiC Nanoparticles on the Coefficient of Thermal Expansion Behavior of the Aluminum Metal Matrix Composites, 5th National Conference on Materials and Manufacturing Processes, Hyderabad, pp.164-168, June, 2006

A. Chennakesava Reddy, Tribological Behavior of AA8090/MgO Composites, 5th National Conference on Materials and Manufacturing Processes, Hyderabad, pp.169-173, June, 2006

S. Madhav Reddy; A. Chennakesava Reddy, Effects of Porosity on Mechanical Properties of Zirconium Oxide/AA1100 Alloy Metal Matrix Composites, 5th National Conference on Materials and Manufacturing Processes, Hyderabad, pp.124-128, June, 2006

Essa Zitoun; A. Chennakesava Reddy, High Pressure Die Casting Process on Micromechanical Properties of AA2024/Boron Carbide Metal Matrix Composites, 5th National Conference on Materials and Manufacturing Processes, Hyderabad, pp.129-133, June, 2006

Essa Zitoun; A. Chennakesava Reddy, Micromechanical and Porosity Studies of Cast AA3003/ Boron Nitride Metal Matrix Composites, 5th National Conference on Materials and Manufacturing Processes, Hyderabad, pp.134-138, June, 2006

A. Chennakesava Reddy, Effect of Porosity Formation during Synthesis of Cast AA4015/Titanium Nitride Particle-Metal Matrix Composites, 5th National Conference on Materials and Manufacturing Processes, Hyderabad, pp.139-143, June, 2006

A. Chennakesava Reddy, Stir Casting Process on Porosity Development and Micromechanical Properties of AA5050/Titanium Oxide Metal Matrix Composites, 5th National Conference on Materials and Manufacturing Processes, Hyderabad, pp.144-148, June, 2006

A.C. S. Kumar; A. Chennakesava Reddy, Effect of Cold Rolling on Porosity and Micromechanical Properties of AA6061/Zirconium Carbide Metal Matrix Composites, 5th National Conference on Materials and Manufacturing Processes, Hyderabad, pp.149-153, June, 2006

S. Madhav Reddy; A. Chennakesava Reddy, Effect of Reinforcement Loading on Porosity and Micromechanical Properties of AA7020/Graphite Metal Matrix Composites, 5th National Conference on Materials and Manufacturing Processes, Hyderabad, pp.154-158, June, 2006

A.C. S. Kumar; A. Chennakesava Reddy, Microstructure and Properties of Liquid Metal Processed MgO Reinforced AA8090 Metal Matrix Composites, 5th National Conference on Materials and Manufacturing Processes, Hyderabad, pp.159-163, June, 2006

B. Uma Maheswara Gowd; A. Chennakesava Reddy, Finite element analysis of axial piston pumps using ANSYS, Computer Applications in Mechanical Engineering, Kakinada, pp.50-54, February, 2006

A. Chennakesava Reddy; S. Sundara Rajan, Analysis of hot ceramic shell behavior at casting conditions, National Conference on Investment Casting, Hyderabad, pp.138-142, December, 2006

A. Chennakesava Reddy, Pattern of cooling contours in the flyash ceramic shell and Al-Mg alloy casting, National Conference on Investment Casting, Hyderabad, pp.143-146, December, 2006

S. Madhav Reddy; A. Chennakesava Reddy, Detection of tool breakage in milling operations using neural networks, 3rd National Conference on Trends in Mechanical Engineering, Hyderabad, pp.73-75, December, 2006

G. S. Rao; A. Chennakesava Reddy, Fluidity of Al-Cu alloys in fused silica and cristobalite investment shell moulds, National Conference on Advances in Design Approaches and Production Technologies (ADAPT-2005), pp.52-56, JNTU College of Engineering, Hyderabad, August, 2005

B. V. S. Rao; A. Chennakesava Reddy, Fluidity of modified and unmodified Al-Si alloys in alumina investment shell moulds, National Conference on Advances in Design Approaches and Production Technologies (ADAPT-2005), pp.57-60, JNTU College of Engineering, Hyderabad, August, 2005

A. Chennakesava Reddy, Prediction of bursting pressure of thin walled 316 stainless steel tubes based on ASME B31G criterion, National Conference on Advances in Design Approaches and Production Technologies (ADAPT-2005), pp.225-228, JNTU College of Engineering, Hyderabad, August, 2005

A. Chennakesava Reddy, Estimation of bursting pressure of thin walled 304 stainless steel tubes based on DNV RP F101criterion, National Conference on Advances in Design Approaches and Production Technologies (ADAPT-2005), pp.229-231, JNTU College of Engineering, Hyderabad, August, 2005

A. Chennakesava Reddy, Reliability assessment of corrosion cracks in cold rolled 302 stainless steel tubes based on SHELL-92 criterion, National Conference on Advances in Design Approaches and Production Technologies (ADAPT-2005), pp.232-234, JNTU College of Engineering, Hyderabad, August, 2005

A. Chennakesava Reddy, Trustworthiness judgment of corrosion cracks in cold rolled 305 stainless steel tubes based on RSTRENG criterion, National Conference on Advances in Design Approaches and Production Technologies (ADAPT-2005), pp.235-237, JNTU College of Engineering, Hyderabad, August, 2005

K. Swapna Sudha; A. C. Reddy, Tensile performance of heat treated AA2024/Al2O3 metal matrix composites using RVE modles: experimental validation, National Conference on Advances in Design Approaches and Production Technologies (ADAPT-2005), pp.332-334, JNTU College of Engineering, Hyderabad, August, 2005

V. K. Prasad; A. C. Reddy, Tensile behavior of tempered AA5050/Al2O3 metal matrix composites using RVE models: experimental validation, National Conference on Advances in Design Approaches and Production Technologies (ADAPT-2005), pp.335-337, JNTU College of Engineering, Hyderabad, August, 2005

M. Chamundeswari; A. C. Reddy, Evaluation of strength improvement in tempered AA5050/SiC metal matrix composites using finite element analysis: experimental validation, National Conference on Advances in Design Approaches and Production Technologies (ADAPT-2005), pp.338-340, JNTU College of Engineering, Hyderabad, August, 2005

S. Sujatha; A. C. Reddy, Assessment of strength improvement in heat treated AA2024/SiC metal matrix composites using finite element analysis: experimental validation, National Conference on Advances in Design Approaches and Production Technologies (ADAPT-2005), pp.341-343, JNTU College of Engineering, Hyderabad, August, 2005

A. Chennakesava Reddy; P. Ram Reddy; B. Kotiveerachari, Optimum trajectory path planning for 3-dof planar robot with minimum joint disturbances, National Conference on Advances in Manufacturing Technology in the Era of Globalization, Pune, pp.8-15, January, 2005

A. Chennakesava Reddy; P. Ram Reddy; B. Kotiveerachari, Large rotation and large deformation analysis of four-bar mechanism, National Level Technical Symposium, Nalgonda , Vol No.1, Issue No.P1, March, 2005

A. Chennakesava Reddy; P. Ram Reddy; B. Kotiveerachari, Generation of RPR and RRR planar parallel robots using computer program, National Level Technical Symposium, Nalgonda , Vol No.1, Issue No.P2, March, 2005

N. Jyothirmayi; A. Chennakesava Reddy; B. Balu Naik, Finite element analysis of Ti-alloy fracture behavior and experimental validation, National Conference on Advances in Mechanical Engineering, Hyderabad, pp.50-55, May, 2005

T. Madhavi; A. Chennakesava Reddy, Manufacturing simulation and optimization of turbine blade die used in forging process, National Conference on Advances in Mechanical Engineering, Hyderabad, pp.127-131, May, 2005

S. Madhav Reddy; A. Chennakesava Reddy, Detection of tool breakage in milling operations using neural networks (ART2), National Conference on Computational Methods in Mechanical Engineering, Hyderabad, pp.195-199, September, 2005

J.J.V.Jeyasingh; K.Dhananjayan; G. Kothandaraman; P.P.Sinha; B.Nageswara Rao; A. Chennakesava Reddy, Studies on the gas pressure formed Pb-Sn Eutectic alloy spherical domes, National Aerospace Manufacturing Seminar, Thiruvanthapuram, pp.294-302, September, 2005

J. J. V. Jeyasingh; K.Dhananjayan; G.Kothandaraman; PP.Sinha; B.Nageswara Rao; A. Chennakesava Reddy, Spherical dome formation by transformation superplasticity of Titanium matrix composites, National Aerospace Manufacturing Seminar, Thiruvanthapuram, pp.302-310, September, 2005

P.S.Ranjit; A. Chennakesava Reddy, Studies on dynamic behaviour of Ti-6al-4v alloy sheets in aircrafts, 19th National Convention of Aerospace Engineers, National Seminar on Indian Aerospace Engineering Perspective-2020, Jaipur, November, 2005

P.S. Ranjit; A. Chennakesava Reddy, Computerized approach for faster product launch, National Conference on Computer Applications in mechanical Engineering, Anantapur, pp.21-24, December, 2005

B. Ramana; A. Chennakesava Reddy; S. Somi Reddy, Fracture analysis of mg-alloy metal matrix composites, National Conference on Computer Applications in mechanical Engineering, Anantapur, pp.57-61, December, 2005

D. V Srikanth; A. Chennakesava Reddy; K. Chaturvedi, Computer controlled oscilloscope used to predict actual thin film lubrication through an end set of parallel plates, National Conference on Computer Applications in mechanical Engineering, Anantapur, pp.78-86, December, 2005

B. Anjeneya Prasad; A. Chennakesava Reddy, Regression analysis approach for predicting process output variables in WEDM, National Conference on Computer Applications in mechanical Engineering, Anantapur, pp.92-96, December, 2005

Essa Zitoun; A. Chennakesava Reddy, Applications of optimisation and reverse engineering solution strategies in the manufacturing of aluminium alloy products, National Conference on Computer Applications in mechanical Engineering, Anantapur, pp.105-111, December, 2005

A. Chennakesava Reddy; A.C.S Kumar, Proportional and derivative control system To reduce the computations of transformation between different space reference frames of SCARA serial manipulator, National Conference on Computer Applications in mechanical Engineering, Anantapur, pp.115-119, December, 2005

Ch. Rajanna; A. Chennakesava Reddy, Parametric optimization of heat treatment process of steel bearing using Taguchi techniques, National Conference on Computer Applications in mechanical Engineering, Anantapur, pp.120-125, December, 2005

S. Madhav Reddy; A. Chennakesava Reddy, Studies on cutting parameters in milling operations of titanium alloys, National Conference on Computer Applications in mechanical Engineering, Anantapur, pp.149-151, December, 2005

A. Chennakesava Reddy, Microstructure and Mechanical Properties of AA2219 Alloy Turbine Impeller Manufactured by Investment Casting, National Conference on Computer Applications in mechanical Engineering, Anantapur, pp.321-323, December, 2005

K. Swapna Sudha; A. Chennakesava Reddy, Tensile performance of heat treated AA2024/Al2O3 metal matrix composites using RVE models: experimental validation, National Conference on Advances in Design Approaches and Production Technologies (ADAPT-2005), Hyderabad, pp.332-334, August, 2005

P. Arivazhagan; Moses Raja Cecil; A. Chennakesava Reddy, A. Rajadurai , Surface characteristics behaviour of the EDM eroded surface of Al-SiC metal matrix composite, National Conference on Computer Applications in mechanical Engineering, Anantapur, pp.165-171, December, 2005

A. Chennakesava Reddy, Impact of Boron Coated Investment Shell Moulds on Surface Modification of Hypoeutectic Al-Si Alloys, National Conference on Computer Applications in mechanical Engineering, Anantapur, pp.324-326, December, 2005

Sandeep S. Patil; U.M. Choudari; A. Chennakesava Reddy, Computer integrated injection mould design, analysis and development, National Conference on Computer Applications in mechanical Engineering, Anantapur, pp.202-205, December, 2005

B. Uma Maheswara Gowd; A. Chennakesava Reddy, Multibody FEM and experimental analysis of the timing system of I.C eight-cylinder engine, National Conference on Computer Applications in mechanical Engineering, Anantapur, pp.261-267, December, 2005

A. Chennakesava Reddy, Thermal Expansion Behavior of Aluminum Matrix Composites Reinforced with Fused Quartz Nanoparticles, National Conference on Advanced Materials and Manufacturing Techniques, Hyderabad, pp.350-355, March, 2004

A. Chennakesava Reddy, Wear Characteristics of AA5050/TiC Metal Matrix Composites, National Conference on Advanced Materials and Manufacturing Techniques, Hyderabad, pp.356-360, March, 2004

A. Chennakesava Reddy, Finite element analysis of elastic-plastic and tensile damage response in carbon-carbon composites under vechicular crush conditions, National Conference on Emerging Trends in Mechanical Engineering, Nagpur, February, 2004

A. Chennakesava Reddy, Experimental evaluation of elastic lattice strains in the discontinuously SiC reinforced Al-alloy composites, National Conference on Emerging Trends in Mechanical Engineering, Nagapur, February, 2004

T. Ratnakar Reddy; A. Chennakesava Reddy, Studies on wear characteristics of gray cast iron cylinder liners treated with salt bath nitriding processes, National Conference on Advanced Materials and Manufacturing Techniques, Hyderabad, pp.13-15, March, 2004

P. Laxminarayana; A. Chennakesava Reddy, Design of top risers using parabolic metal flow concept during solidification, National Conference on Advanced Materials and Manufacturing Techniques, Hyderabad , pp.51-54, March, 2004

Sirajuddin Elyas Khany; A. Chenna Kesava Reddy, Monte carlo simulation to predict fatigue limit of brass specimens, National Conference on Advanced Materials and Manufacturing Techniques, Hyderabad , pp.64-66, March, 2004

S. Madhava Reddy; A. Chennakesava Reddy, Studies on machining characterisitcs of silcon nitride ceramics, National Conference on Advanced Materials and Manufacturing Techniques,Hyderabad, pp.88-90, March, 2004

S. Satyanarayana; A. Chennakesava Reddy; P. Ram Reddy, Finite modeling of high speed milling processes, National Conference on Advanced Materials and Manufacturing Techniques,Hyderabad , pp.108-115, March, 2004

Vivek kishore Prasad; A. Chennakesava Reddy, Finite element analysis and experimental validation of dynamic behavior of corner jointed structures, National Conference on Advanced Materials and Manufacturing Techniques, Hyderabad , pp.129-133, March, 2004

M. Masood; A. Chennakesava Reddy, Interactive computer program in combination with finite element analysis software for the reduction of resonant vibration in the structural materials, National Conference on Advanced Materials and Manufacturing Techniques, Hyderabad , pp.139-143, March, 2004

J. Jeswin Vetha Jeyasingh; A. Chennakesava Reddy, Studies on the effectiveness of low plasticity burnishing with 4-axis CNC vertical mill for compressive residual stress layer in austenized steel, National Conference on Advanced Materials and Manufacturing Techniques, Hyderabad , pp.221-227, March, 2004

B. Kotiveerachari; A. Chennakesava Reddy, Non-linear finite element modeling for dynamic trajectory controlling of robotic manipulators with flexible links, National Conference on Advanced Materials and Manufacturing Techniques, Hyderabad , pp.265-272, March, 2004

A. Chennakesava Reddy; P. Rami Reddy, Elastic rigid-body dynamic modeling of planar parallel robot actuated by servomotors, National Conference on Advanced Materials and Manufacturing Techniques, Hyderabad , pp.273-279, March, 2004

A. Chennakesava Reddy, Analysis of the Relationship Between the Interface Structure and the Strength of Carbon-Aluminum Composites, NATCON-ME, Bangalore, pp.61-62, March, 2004

A. Chennakesava Reddy; B. Kotiveerachari, Evaluation of high temperature creep strength of austenite stainless steel during MMAW, NATCON-ME, Bangalore, pp.63-64, March, 2004

A. Chennakesava Reddy; P. Ram Reddy; B. Kotiveerachari, Optimization of path dependent trajectory for an arm - like serial chain robot using genetic algorithm, National Conference on Recent Trends in CAD/CAM, Bidar, pp.25-33, July, 2004

S. Madhav Reddy; A. Chennakesava Reddy, Studies on cutting force coefficients in peripheral milling of Ti-alloy, National Conference on Recent Trends in CAD/CAM, Bidar, pp.55-61, July, 2004

A. Chennakesava Reddy, Thermo-Physical Properties of Fused Silica Investment Shell Moulds at Preheat Conditions of Steel Casting, National Conference on Advanced Materials and Manufacturing Techniques, Hyderabad, pp.342-346, March, 2004

A. Chennakesava Reddy, Structure and Morphology of Recycled Iron-Rich Al-Si Alloys Cast in Thin-Walled Investment Shell Moulds, National Conference on Advanced Materials and Manufacturing Techniques, Hyderabad, pp.347-349, March, 2004

A. Chennakesava Reddy, Thermoelastic contact analysis of vehicle brake system, National Seminar on Vehicle Dynamics, Visakhapatnam, pp.49-54, February, 2003

B. Rajasekhara Reddy; A. Chennakesava Reddy, Obstacle avoidance of planar redundant manipulators for pick-and-place operations using real-coded genetic algorithm, National Conference on Advances in Manufacturing Technology, Palghat, Vol No.5, Issue No.A, pp.2-5, February, 2003

A. Chennakesava Reddy; B. Kotiveerachari; P. Ram Reddy, Kinematic model of a flexible link using local curvatures as the deformation coordinates, National Conference on Advances in Manufacturing Technology, Palghat, Vol No.1, Issue No.A, pp.3-7, February, 2003

B. Rajasekhara Reddy; A. Chennakesava Reddy, Dynamic modeling of two-link robot arm driven by DC motors using linear graph theory and principles of mechanics, National Conference on Trends in Mechanical Engineering, Warangal, pp.130-132, August, 2003

A. Chennakesava Reddy; P. Ram Reddy; B. Kotiveerachari, Two methods for computing reduced-form dynamics of closed-chain mechanism, National Conference on Trends in Mechanical Engineering, Warangal, pp.133-136, August, 2003

P. Laxminarayana; A. Chennakesava Reddy, Nonlinear finite element modeling of machining process to minimize distortion in forged turbine disk, National Conference on Computer integrated Design and Manufacturing, Coimbatore , pp.97-102, November, 2003

V.S.R.Murti; A. Chennakesava Reddy, Finite difference analysis of gray cast-iron solidification process, National Conference on Computer integrated Design and Manufacturing, Coimbatore , pp.103-110, November, 2003

B. Kotiveerachari; A. Chennakesava Reddy, Kinematic and static analysis of gripper fingers using reciprocal screws, National Conference on Computer integrated Design and Manufacturing, Coimbatore , pp.121-124, November, 2003

A. Chennakesava Reddy; P. Ram Reddy, Hazard detection for multi - agent reactive robotic system using on - line software analysis of safety constraints, National Conference on Computer integrated Design and Manufacturing, Coimbatore , pp.294-301, November, 2003

A. Chennakesava Reddy; B. Kotiveerachari, Effect of matrix microstucture and reinforcement fracture on the properties of tempered SiC/Al-alloy composites, National conference on advances in materials and their processing, Bagalkot, pp.121-124, November, 2003

A. Chennakesava Reddy, Evaluation of Thermal Expansion of Al/B4C Metal Matrix Composites, 3rd National Conference on Materials and Manufacturing Processes, Hyderabad, pp.196-200, February, 2002

A. Chennakesava Reddy, Wear Resistant Titanium Boride Metal Matrix Composites, 3rd National Conference on Materials and Manufacturing Processes, Hyderabad, pp.201-205, February, 2002

B. Kotiveera Chari; A. Chennakesava Reddy, Finite Element Modeling and Experimental Validation of Interphase Debonding and Particle Fracture in Titanium Carbide/AA1100 Alloy, 3rd National Conference on Materials and Manufacturing Processes, Hyderabad, pp.156-161, February, 2002

B. Kotiveera Chari; A. Chennakesava Reddy, Interphase Cracking in Titanium Nitride/2024 Alloy Particle-Reinforced Metal-Matrix Composites, 3rd National Conference on Materials and Manufacturing Processes, Hyderabad, pp.162-167, February, 2002

V. V. Satyanarayana; A. Chennakesava Reddy, Computation of Interphase Separation and Particle Fracture of Titanium Oxide/3003 Particle Reinforced Composites: The Role of Thermo-Mechanical Loading, 3rd National Conference on Materials and Manufacturing Processes, Hyderabad, pp.168-173, February, 2002

V. V. Satyanarayana; A. Chennakesava Reddy, Micromechanical Modeling of Reinforcement Fracture in Zirconium Carbide/4015 Particle-Reinforced Metal-Matrix Composites, 3rd National Conference on Materials and Manufacturing Processes, Hyderabad, pp.174-178, February, 2002

A. Chennakesava Reddy, wo dimensional (2D) RVE-Based Modeling of Interphase Separation and Particle Fracture in Graphite/5050 Particle Reinforced Composites, 3rd National Conference on Materials and Manufacturing Processes, Hyderabad, pp.179-183, February, 2002

A. Chennakesava Reddy, Simulation of MgO/AA6061 Particulate-Reinforced Composites Taking Account of CTE Mismatch Effects and Interphase Separation, 3rd National Conference on Materials and Manufacturing Processes, Hyderabad, pp.184-187, February, 2002

Ch. Rajanna; A. Chennakesava Reddy, Effects of Interphase and Interface Characteristics on the Tensile Behavior of Boron Nitride/7020 Particle Reinforced Composites Subjected to Thermo-Mechanical Loading, 3rd National Conference on Materials and Manufacturing Processes, Hyderabad, pp.188-191, February, 2002

Ch. Rajanna; A. Chennakesava Reddy, Modeling of Interphases in SiO2/AA8090 alloy Particle -Reinforced Composites under Thermo-Mechanical Loading Using Finite Element Method, 3rd National Conference on Materials and Manufacturing Processes, Hyderabad, pp.192-195, February, 2002

A. Chennakesava Reddy; K Ravaivarma; E. Thirupathi Reddy, A study on the effects of joint and edge preparation to produce cost reduction and distortion free welds, National Welding Seminar, IIT-Madras, pp.51-55, January, 2002

A. Chennakesava Reddy, Two dimensional (2D) RVE-Based Modeling of Interphase Separation and Particle Fracture in Graphite/5050 Particle Reinforced Composites, 3rd National Conference on Materials and Manufacturing Processes, Hyderabad, pp.179-183, February, 2002

A. Chennakesava Reddy, Development of Alumina Investment Shell Molds to Cast 7075 Al-Alloy, National Conference on Advances in Manufacturing Technologies (AMT-2001), Pune, pp.102-104, March, 2001

A. Chennakesava Reddy, Mechanisms of Load Transfer in Tension to Estimate Interfacial Behaviour of Kevlar 29 / Epoxy Composites by Laser Raman Spectroscopy, National Conference on Advances in Manufacturing Technologies (AMT-2001), Pune, pp.205-207, March, 2001

Ch. Rajana; A. Chennakesava Reddy, Interfacial Reaction between Zirconium Alloy and Zirconia Ceramic Shell Mold, National Conference on Advanced Materials and Manufacturing Technologies, Hyderabad, pp.212-217, March, 2000

S. Madhav Reddy; A. Chennakesava Reddy, Interfacial Reaction between Magnesium Alloy and magnesia Ceramic Shell Mold, National Conference on Advanced Materials and Manufacturing Technologies, Hyderabad, pp.218-222, March, 2000

A. Chennakesava Reddy, Micromechanical and fracture behaviors of Ellipsoidal Graphite Reinforced AA2024 Alloy Matrix Composites, 2nd National Conference on Materials and Manufacturing Processes, Hyderabad, pp.96-103, March, 2000

B. Kotiveera Chari; A. Chennakesava Reddy, Debonding Microprocess and interfacial strength in ZrC Nanoparticle-Filled AA1100 Alloy Matrix Composites using RVE approach, 2nd National Conference on Materials and Manufacturing Processes, Hyderabad, pp.104-109, March, 2000

S. Sundara Rajan; A. Chennakesava Reddy, Micromechanical Modeling of Interfacial Debonding in Silicon Dioxide/AA3003 Alloy Particle-Reinforced Metal Matrix Composites, 2nd National Conference on Materials and Manufacturing Processes, Hyderabad, pp.110-115, March, 2000

S. Sundara Rajan; A. Chennakesava Reddy, Role of Volume Fraction of Reinforcement on Interfacial Debonding and Matrix Fracture in Titanium Carbide/AA4015 Alloy Particle-Reinforced Metal Matrix Composites, 2nd National Conference on Materials and Manufacturing Processes, Hyderabad, pp.116-120, March, 2000

A. Chennakesava Reddy, Constitutive Behavior of AA5050/MgO Metal Matrix Composites with Interface Debonding: the Finite Element Method for Uniaxial Tension, 2nd National Conference on Materials and Manufacturing Processes, Hyderabad, pp.121-127, March, 2000

B. Kotiveera Chari; A. Chennakesava Reddy, Interfacial Debonding of Boron Nitride Nanoparticle Reinforced 6061 Aluminum Alloy Matrix Composites, 2nd National Conference on Materials and Manufacturing Processes, Hyderabad, pp.128-133, March, 2000

P. M. Jebaraj; A. Chennakesava Reddy, Simulation and Microstructural Characterization of Zirconia/AA7020 Alloy Particle-Reinforced Metal Matrix Composites, 2nd National Conference on Materials and Manufacturing Processes, Hyderabad, pp.134-140, March, 2000

P. M. Jebaraj; A. Chennakesava Reddy, Continuum Micromechanical modeling for Interfacial Debonding of TiN/AA8090 Alloy Particulate Composites, 2nd National Conference on Materials and Manufacturing Processes, Hyderabad, pp.141-145, March, 2000

B. Kotiveerachari; A. Chennakesava Reddy, Interfacial effect on the fracture mechanism in GFRP composites, CEMILAC Conference, Ministry of Defence, India, Vol No.1, Issue No.B, pp.85-87, August, 1999

A. Chennakesava Reddy; S. Sundararajan; V.S.R. Murti, Dampening of noise parameters for developing ceramic shell from coal fly ash by Taguchi Method, CEMILAC Conference, Ministry of Defence, India, Vol No.1, Issue No.B, pp.91-95, August, 1999

V.V. Satyanarayana; A. Chennakesava Reddy; S. Sundararajan, Reduction of Casting Porosity in the Lost-wax process choosing right coating materials by response surface criteria, CEMILAC Conference, Ministry of Defence, India, Vol No.1, Issue No.B, pp.110-114, August, 1999

M. Sumanth; A. Chennakesava Reddy; V.S.R. Murti, Fluidity testing of Al-Si-Mg alloys, CEMILAC Conference, Ministry of Defence, India, Vol No.1, Issue No.I, pp.1-4, August, 1999

P. Martin Jebaraj; A. Chennakesava Reddy, Prediction of thermal shock of ceramic shells using fused silica as reinforcing filler at casting conditions, National Conference on Advances in Production Technology, Bangalore, pp.52-56, February, 1998

H.B. Niranjan; A. Chennakesava Reddy, Investment shell moulds using graphite filler to prevent dimensional instability and metal-mould reaction of Ti-alloy castings, National Conference on Advances in Production Technology, Bangalore, pp.57-62, February, 1998

A. Chennakesava Reddy, Assessment of Debonding and Particulate Fracture Occurrences in Circular Silicon Nitride Particulate/AA5050 Alloy Metal Matrix Composites, National Conference on Materials and Manufacturing Processes, Hyderabad, pp.104-109, February, 1998

H. B. Niranjan; A. Chennakesava Reddy, Effect of Elastic Moduli Mismatch on Particulate Fracture in AA7020/Silicon Nitride Particulate Metal Matrix Composites, National Conference on Materials and Manufacturing Processes, Hyderabad, pp.115-118, February, 1998

P. M. Jebaraj; A. Chennakesava Reddy, Cohesive Zone Modelling for Interface Debonding in AA8090/Silicon Nitride Nanoparticulate Metal Matrix Composites, National Conference on Materials and Manufacturing Processes, Hyderabad, pp.119-122, February, 1998

P. M. Jebaraj; A. Chennakesava Reddy, Plane Strain Finite Element Modeling for Interface Debonding in AA1100/Silicon Oxide Nanoparticulate Metal Matrix Composites, National Conference on Materials and Manufacturing Processes, Hyderabad, pp.123-126, February, 1998

A. Chennakesava Reddy, Local Stress Differential for Particulate Fracture in AA2024/Titanium Carbide Nanoparticulate Metal Matrix Composites, National Conference on Materials and Manufacturing Processes, Hyderabad, pp.127-131, February, 1998

B. Kotiveera Chari; A. Chennakesava Reddy, Interface Debonding and Particulate Facture based on Strain Energy Density in AA3003/MgO Nanoparticulate Metal Matrix Composites, National Conference on Materials and Manufacturing Processes, Hyderabad, pp.132-136, February, 1998

H. B. Niranjan; A. Chennakesava Reddy, Numerical and Analytical Prediction of Interface Debonding in AA4015/Boron Nitride Nanoparticulate Metal Matrix Composites, National Conference on Materials and Manufacturing Processes, Hyderabad, pp.137-140, February, 1998

S. Sundara Rajan; A. Chennakesava Reddy, Effect of Particulate Volume Fraction on Particulate Cracking in AA5050/Zirconium Oxide Nanoparticulate Metal Matrix Composites, National Conference on Materials and Manufacturing Processes, Hyderabad, pp.156-159, February, 1998

S. Sundara Rajan; A. Chennakesava Reddy, Cohesive Zone Analysis for Interface Debonding in AA6061/Titanium Nitride Nanoparticulate Metal Matrix Composites, National Conference on Materials and Manufacturing Processes, Hyderabad, pp.160-164, February, 1998

A. Chennakesava Reddy; V.S.R. Murti; S. Sundararajan, Development of a ceramic moulding process from coal flyash for investment casting, 18th AIMTDR Conference, Kharagpur, pp.118-122, December, 1998

B. Kotiveera Chari; A. Chennakesava Reddy, Numerical Simulation of Particulate Fracture in Round Silicon Nitride Particulate/AA6061 Alloy Metal Matrix Composites, National Conference on Materials and Manufacturing Processes, Hyderabad, pp.110-114, February, 1998

A. Chennakesava Reddy, Characterization of ceramic shells fabricated using yttria as reinforcing filler, National Conference on Advanced Materials and Manufacturing Technologies, Hyderabad, pp.125-129, December, 1997

A.Chennakesava Reddy; S. Sundararajan, Characterization of ceramic shells using rutile (titania) as reinforcing filler at casting temperature, National Conference on Advanced Materials and Manufacturing Technologies, Hyderabad, pp.130-134, 12, 1997

A. Chennakesava Reddy, Interfacial Debonding Analysis in Terms of Interfacial Tractions for Titanium Boride/AA3003 Alloy Metal Matrix Composites, 1st National Conference on Modern Materials and Manufacturing, Pune, pp.124-127, December, 1997

P. Martin Jebaraj; A. Chennakesava Reddy, Effect of Interfacial Debonding on Stiffness of Titanium Boride/AA5050 Alloy Metal Matrix Composites, National Conference on Modern Materials and Manufacturing, Pune, pp.132-135, December, 1997

S. Sundara Rajan; A. Chennakesava Reddy, Micromechanical modeling of Titanium Boride/AA7020 Alloy Metal Matrix Composites in Finite Element Analysis using RVE Model, 1st National Conference on Modern Materials and Manufacturing, Pune, pp.140-143, December, 1997

P. Martin Jebaraj; A. Chennakesava Reddy, Effect of Interfacial Tractions of Rectangular Titanium Boride Particulate/AA8090 Alloy Metal Matrix Composites, 1st National Conference on Modern Materials and Manufacturing, Pune , pp.144-147, December, 1997

S. Sundara Rajan; A. Chennakesava Reddy, Cohesive Zone interfacial debonding of Silicon Nitride/AA1100 Alloy Metal Matrix Composites Using Finite Element Analysis, 1st National Conference on Modern Materials and Manufacturing, Pune, pp.265-268, December, 1997

S. Sundara Rajan; A. Chennakesava Reddy, Simulation of Micromechanics for interfacial debonding in Silicon Nitride/AA2024 Alloy Metal Matrix Composites, 1st National Conference on Modern Materials and Manufacturing, Pune-269, 272, December, 1997

P. Martin Jebaraj; A. Chennakesava Reddy, Finite Element Analysis for Assessment of Dislocation and Debonding Events in Silicon Nitride/AA3003 Alloy Metal Matrix Composites, 1st National Conference on Modern Materials and Manufacturing, Pune, pp.273-277, December, 1997

A. Chennakesava Reddy, Evaluation of Debonding and Dislocation Occurrences in Rhombus Silicon Nitride Particulate/AA4015 Alloy Metal Matrix Composites, 1st National Conference on Modern Materials and Manufacturing, Pune, pp.278-282, December, 1997

A. Chennakesava Reddy; K. Gokul; P.Mahesh; G.S.Reddy; C.R. Suresh, Effect of shielding gases on the performance of weld bead in MIG welding, 13th National convention of Mechanical Engineers, Conference on Modern Trends in Manufacturing Technology, New Delhi, pp.273-279, November, 1997

A. Chennakesava Reddy; V.S.R. Murti, Studies on Lost-wax process using silox binder, X-ISME Conference on Mechanical Engineering, New Delhi, pp.82-86, December, 1996

A. Chennakesava Reddy, METAL MATRIX COMPOSITES - THEIR PROPERTIES AND APPLICATIONS, pp.1-22, JNTUH, December, 2018