International Journals
1  .
 B.Sudheerprem kumar, Development of Mathematical Model for Metal Removal Rate on EDM using Copper & Brass Electrodes, 7th International Conference on Materials Processing and Characterization (ICMPC-2017), ELSEVIER, MARCH, 2017
2  .
 B.Sudheerprem kumar, Comparative study of use of CNG with bio fuels in Diesel Engine, International Journal of scientific & Engineering Research, ISBN No.2229 - 5518, Vol No.7, Issue No.6, IJSER, JUNE, 2016
3  .
 B.Sudheerprem kumar, Experimental Investigations on Performance Evaluation of Medium Grade semi adiabatic Diesel Engine with Carbureted Methanol and crude Karanja Oil, International conference on recent trends in engineering, science and technology, Hyderabad, India, ELSEVIER, 1st JUNE, 2016
4  .
 B.Sudheerprem kumar, A Review of Porous -Media Combustion Technology Applied to IC Engine, International Journal of Engineering Research, ISBN No.ISSN:2319 - 6890(online), 2347 - 5013(print), Vol No.5, Issue No.2, pp.491-494, IJER, FEB, 2016
5  .
 B.Sudheerprem kumar, A Review of Hydrogen Combustion Technology Applied to DI Diesel Engines, International Journal of scientific & Engineering Research, ISBN No.2229-5518, Vol No.7, Issue No.6, IJSER, JUNE, 2016
6  .
 B.Sudheerprem kumar, Detailed Energy Audit and Conservation in a Cement Plant, International Research Journal of Engineering and Technology, ISBN No.e-ISSN: 2395-0056, p-ISSN: 2395-0072, Vol No.2, Issue No.1, IRJET, APRIL, 2015
7  .
 B.Sudheerprem kumar, Effect of CNG flow rate on the performance and emissions of a Mullite-coated diesel engine under dual-fuel mode, Taylors & Francis International Journal of Ambient Energy, 2015
8  .
 B.Sudheerprem kumar, Biodiesel Oil Production From Jatropa Curcas, International Journal of Scientific Engineering and Research, ISBN No.2319-8885, Vol No.4, Issue No.18, IJSER, June, 2015
9  .
 B.Sudheerprem kumar, Experimental Study on Utilization of Exhaust Gas of an I.C. Engine, International Journal of Research & Development Organisation, ISBN No.3855-0514, Vol No.2, Issue No.9, IJRDO, September, 2015
10  .
 B.Sudheerprem kumar, A Comprehensive Study on Solar Power Plant at Educational Institute Level, International Journal of Scientific Research Engineering Technology, ISBN No.ISSN (Online): 2395-566X, Vol No.1, Issue No.4, July, 2015
11  .
 B.Sudheerprem kumar, Performance Analysis of air Filters for Diesel Engine an Experimental Approach, International Journal of Research in Engineering & Applied Sciences, ISBN No.2249 -3905, Vol No.4, Issue No.2, IJREAS, February, 2014
12  .
 B.Sudheerprem kumar, Heat Shielding Analysis of a Hypersonic Aerospace Vehicle Structure, International Journal of Mechanical Engineering, ISBN No.2277-7059, Vol No.4, Issue No.3, IJME, March, 2014
13  .
 B.Sudheerprem kumar, Effect of Specific Heat Parameters on Performance of SI Engine, International Journal for Research in Applied Science & Engineering Technology (IJRASET), ISBN No.2321-9653, Vol No.2, Issue No.11, IJRASET, November, 2014
14  .
 B.Sudheerprem kumar, Influence of reinforcements and heat treatment on mechanical and wear properties of Al 7075 based hybrid compsite, Published in Procedia material science(ELSEVIER) an International Journal, Vol No.5, ELSEVIER, 2014
15  .
 B.Sudheerprem kumar, Effect of Injection Pressure on Performance and Emissions of CNG Diesel Dual Fuel Engine, International Journal of Engineering Science and Technology, ISBN No.0975-5462, Vol No.6, Issue No.6, June, 2014
16  .
 B.Sudheerprem kumar, Progress of Developments in Automobile Cataytic converter materials & Their Manufacture in the last four decades, published in 5th National conference on Advances in Mechanical Engineering (AIM - 2014) organized by Vasavi College of Engg, AIM - 2014, November, 2014
17  .
 B.Sudheerprem kumar, Development of Automobile Catalytic Converter during last four decades – A Review, published International Journal for research in Applied Science & Technology (IJRASET), ISBN No.2321 – 9653 , Vol No.2, Issue No.11, IJRASET, November, 2014
18  .
 B.Sudheerprem kumar, Effect of Thermal insulation on the performance and emission characteristics of a CNG-Diesel dual fuel engine, published in International Journal of Engineering Studies, ISBN No.0975-6469 , Vol No.6, Issue No.1, IJES, 2014
19  .
 B.Sudheerprem kumar, Validation of hardness and tensile strength of Al 7075 based hybrid composites using artificial neural networks, Published in International Journal Mechanical Engineering and Technology, Vol No.5, Issue No.9, IJMET, Sept, 2014
20  .
 B.Sudheerprem kumar, Experimental Investigation on performance Evaluation of a single basin solar still using different energy absorbing materials, Published in Proceedings of the ASME 2014 8th International Conference on Energy Sustainability ES2014, June 30 to july2, 2014, Boston, Massachusette, USA., June 30 to july2, 2014
21  .
 B.Sudheerprem kumar, Heat Shielding Analysis of a Hypersonic Aerospace Vehicle Structure, Heat Shielding Analysis of a Hypersonic Aerospace Vehicle Structure, ISBN No.2277-7059, Vol No.4, Issue No.3, IJME, March, 2014
22  .
 B.Sudheerprem kumar, Study on Bio-Fuels from Water borne Oleaginous Sources, International Journal of Science and Research(IJSR), ISBN No.ISSN:2319-7064(online), Vol No.3, Issue No.12, IJSR, December, 2014
23  .
 B.Sudheerprem kumar, Performance and Analysis of Diesel Engine at various Injection Timings under various Cooling Rates during Shorter Injection Period, Published in 4th International Conference on Materials Processing and Characterization, Elsevier, 2014
24  .
 B.Sudheerprem kumar, Experimental Analysis & Performance Evaluation Of A Split Air Conditioning System Using R22, R407C And R410A, published in International Journal of Current Engineering and Technologly, ISBN No.E-ISSN 2277 – 4106, P-ISSN 2347 – 5161, Vol No.4, Issue No.6, December , 2014
25  .
 B.Sudheerprem kumar, Experimental Analysis and Modeling of Proton Exchange Membrane Fuel Cell, Published in International Journal of Research in Engineering and Technology, ISBN No.e-ISSN: 2319 -1163, P-ISSN: 2321-7308, Vol No.3, Issue No.11, Nov, 2014
26  .
 B.Sudheerprem kumar, Performance and Emission Analysis of Diesel Engine using CNG under Dual Fuel Mode with Exhaust Gas Recirculation, Published in Global Journal of Researches in Engineering: A Mechanical and Mechanics Engineering (USA), ISBN No.Online ISSN: 2249-4596 & print ISSN: 0975-5861, Vol No.14, Issue No.2, GJRE, 2014
27  .
 B.Sudheerprem kumar, Reduction of Oxides of Nitrogen Emissions in single cylinder dual fuel engine using exhaust gas Recirculation and varying Pressures, International Journal of Advanced Research in Engineering and Technology(IJARET), ISBN No.ISSN 0976-6480(print); ISSN 0976-6499(online), Vol No.5, Issue No.5, IJARET, May, 2014
28  .
 B.Sudheerprem kumar, Effect on Injection Pressure on performance and Emissions of CNG Diesel Dual Fuel Engine, International Journal of Engineering Science & Technology(IJEST), ISBN No.0975-5462 , Vol No.6, Issue No.6, IJEST, JUNE, 2014
29  .
 B.Sudheerprem kumar, Effect of Thermal Insulation on the Performance and Emission Characteristics of a CNG-Diesel Dual Fuel Engine, International Journal of Engineering Studies, ISBN No.0975-6469 , Vol No.6, Issue No.1, IJES, 2014
30  .
 B.Sudheerprem kumar, An Investigation and Analysis of Ampacity in Buried Power Cables, International Chamber of SME Association(ICOSA), ISBN No.ISSN: 2277-4890, ICOSA, Jan-Mar, 2014
31  .
 B.Sudheerprem kumar, Evaluation of mechanical and wear properties of Al 7075, fly ash and E-glass fiber reinforced hybrid metal matrix composites, Indian Fourndry Journarl, ISBN No.0379-5446, Vol No.59, Issue No.2, IFJ, Feb, 2013
32  .
 B.Sudheerprem kumar, The Effect of change in the Temperature of fuel on the performance of PEM fuel cell, International Journal of Scientific & Engineering Research, ISBN No.2229-5518, Vol No.4, Issue No.12, IJSER, DECEMBER, 2013
33  .
 B.Sudheerprem kumar, Engine Emission at Various Cetane Numbers with Exhaust Gas Recirculation, IOSR Journal of Mechanical and Civil Engineering (IOSR-JMCE), ISBN No.e-ISSN:2278 – 1684, p-ISSN: 2320-334X, Vol No.8, Issue No.6, IOSR-JMCE, OCT, 2013
34  .
 B.Sudheerprem kumar, Single Cylinder 4 Stroke VCR Diesel Engine Performance And Analysis at Various Blends of Fuels Under Various Cooling Rates, International Journal of Innovative Research & Development, ISBN No.ISSN: 2278 – 0211(Online), Vol No.2, Issue No.8, IJIRD, August, 2013
35  .
 B.Sudheerprem kumar, Reduction of Diesel Engine Emission and its Analysis by using Exhaust gas Recirculation at Various Cooling Rates, International Journal of Engineering and Innovative Technology(IJEIT), Vol No.3, Issue No.2, IJEIT, August, 2013
36  .
 B.Sudheerprem kumar, Performance Evaluation of Low Heat Rejection Diesel Engine using Fish oil Bio-diesel Blends, International Conference on Alternate Fuels and I.C. Engines in NIT Jaipur, ICAF, 6th -8th Feb , 2013
37  .
 B.Sudheerprem kumar, Effect of Variation in Compression Ratio on Characteristics of CI Engine Fuelled with Honge oil- Ethanol Blend, International Journal of Mechanical Engineering and Technology (IJMET), ISBN No.ISSN 0976-6340(Print); ISSN 0976 – 6359(online), Vol No.4, Issue No.4, IJMET, July- August, 2013
38  .
 B.Sudheerprem kumar, Effect of Pilot Fuel Quantity on The Performance and Emission Characteristics of a Pre-Mixed CNG Dual Fuel mode Engine, IOSRVJournal of Mechanical and Civil Engineering, ISBN No.e-ISSN2278-1684-.p-ISSN: 2320-334X, Vol No.9, Issue No.2, pp.1-9, IOSRVJMCE, Sep- Oct, 2013
39  .
 B.Sudheerprem kumar, Evaluation of Ultimate Tensile Strength and Corrosion Resistance of Al-Mg-Si Based Hybrid Composite in Different Ageing Conditions, International Journal of Material Science, ISBN No.0973-4589, Vol No.8, Issue No.1, IJMS, 2013
40  .
 B.Sudheerprem kumar, Evaluation of Mechanical and Wear Properties of Al7075, Fly Ash and E-Glass Fibre- Reinforced Hybrid Metal Matrix Composites, Indian Foundry Journal, ISBN No.ISSN 0379-5446, Vol No.59, Issue No.2, Feb, 2013
41  .
 B.Sudheerprem kumar, Emission Analysis of Diesel Engine by substituting CNG Under dual fuel Mode, Published in proceedings of International Conference on Advances in Computer Science and Engineering (ICACSE 2013), ICACSE 2013, 7th -8th January , 2013
42  .
 B.Sudheerprem kumar, Effect of Radiations on Unsteady Heat and Mass Transfer of a Chemically Reactive Fluid past a Semi-Infinite Vertical Plate with Viscous Dissipation, Internatonal Journal of Engineering, Research and Industrial Applications (IJERIA), ISBN No.0974-1518 , Vol No.5, Issue No.2, IJERIA, MAY, 2012
43  .
 B.Sudheerprem kumar, Pem Fuel Cell – Future Source of Energy, National Conference on “Emerging Trends in Mechanical Engineering published in Internatonal Journal of Engineering, Research and Industrial Applications (IJERIA), ISBN No.0974-1518 , Vol No.5, Issue No.2, IJERIA, MAY, 2012
44  .
 B.Sudheerprem kumar, Comparative Experimental Investigation of Combustin, Performance and Emission in a single Cylinder Thermal Barrier Coated Diesel Engine using diesel and neem biodiesel, International Journal of Engineering Research and Development, ISBN No.2278-800X, Vol No.3, Issue No.2, IJERD, AUG, 2012
45  .
 B.Sudheerprem kumar, Performance of a CI Engine with Different Blends of Mahua Biodiesel under varying operating conditions, International Journal of Engineering and Technology, ISBN No.2049 – 3444, Vol No.2, Issue No.7, IJET, JULY, 2012
46  .
 B.Sudheerprem kumar, Performance and Emission Characteristics of Straight Vegetable oil-Ethanol Emulsion in a Compression Ignition Engine, Published in ARPN Journal of Engineering and Applied Sciences, ISBN No.1819-6608, Vol No.7, Issue No.4, ARPNJEAS, APRIL, 2012
47  .
 B.Sudheerprem kumar, Effect of CNG and Neem oil blends on Performance and Emission Characteristics of a diesel engine- A comparative Analysis, Published in International Journal of Emerging Trends in Engineering and Development (IJETED), ISBN No.2249-6149, Vol No.5, Issue No.2, IJETED, JULY, 2012
48  .
 B.Sudheerprem kumar, The Stage of the art Research on Homogeneous charge compression Ignition (HCCI) Engines, International Journal of Earth Sciences and Engineering, ISBN No.0974-5904, IJESE, January 4-6, 2012
49  .
 B.Sudheerprem kumar, Effect of Varying Operating Conditions on Performance of a CI Engine with Different Blends of Mahua(Madhuca Longifolia) Biodiesel, International Journal of Emerging Technologies and Applications in Engineering, Technology and Sciences, ISBN No.0974-3588, Vol No.5, Issue No.2, IJETAETS, JULY, 2012
50  .
 B.Sudheerprem kumar, Effect of Ethanol addition to straight Vegitable oil on Performance and Emission Characteristics of Compression Ignition Engine, Published in International Journal of Scientific & Engineering Research, Vol No.3, Issue No.10, IJSER, OCTOBER, 2012
51  .
 B.Sudheerprem kumar, Wear Properties of Aluminum (7075)-based metal matrix composites reinforced with fly ash particulates, Indian Foundry Journal, ISBN No.0379-5446, Vol No.58, Issue No.4, IFJ, APRIL, 2012
52  .
 B.Sudheerprem kumar, Experimental Investigation on effect of Injection timing on Performance, Combustion and emission characteristics Compression Ignition Engine fuelled with Vegetable oil – Ethanol Blend, International Journal of Engineering Research & Technology(IJERT), ISBN No.2278-0181, Vol No.1, Issue No.10, IJERT, DECEMBER, 2012
53  .
 B.Sudheerprem kumar, Influence of of reinforcements and heat treatment on Mechanical and Tribological properties of hybrid composites formed by A 7075 reinforced, published in International Journal of Advanced Materials Science, ISBN No.2231-1211, Vol No.3, Issue No.3, IJAMS, 2012
54  .
 B.Sudheerprem kumar, Evaluation of hardness and tensile properties of Al 7075 based composite, published in International Journal of Advances in Engineering & Research, ISBN No.2231-5152, Vol No.3, Issue No.1, IJAER, JANUARY, 2012
55  .
 B.Sudheerprem kumar, Evaluation of Corrosion Resistance and Hardness of Al-Mg-Si Based Hybrid Composite, Indian Foundry Journal, Vol No.58, Issue No.3, IFJ, MARCH, 2012
56  .
 B.Sudheerprem kumar, Combustion Analysis of Mahua, Honne and Castor based Biodiesel as Fuel in CI Engine, International Journal of Multidisciplinary Research & Advances in Engineering, ISBN No.0975-7074, Vol No.4, Issue No.2, IJMRAE, APRIL, 2012
57  .
 B.Sudheerprem kumar, Influence of Injection Pressure, Injection Timing and Compression Ratio on Performance, Combustion and Diesel Engine using Castor Methyl Ester Blends, International Journal of Engineering Science & Technology, ISBN No.0975-5462, Vol No.4, Issue No.3, IJEST, MARCH, 2012
58  .
 B.Sudheerprem kumar, Pem Fuel Cell – Alternative Source of Energy, International Journal of Engineering Research & Industrial Applications, ISBN No.0974-1518 , Vol No.5, Issue No.2, pp.223-226, IJERIA, MAY, 2012
59  .
 B.Sudheerprem kumar, Pem Fuel Cell – Attractive Source of Energy, International Journal of Innovative Research & Development, ISBN No.2278-0211, Vol No.1, Issue No.6, IJIRD, SEP, 2012
60  .
 B.Sudheerprem kumar, Evaluation of Wear and Hardness of Al-Si-Mg Based Hybrid Composite at Different Aging Conditions, International Journal of Scientific and Research publications, ISBN No.2250-3153, Vol No.2, Issue No.8, IJSRP, AUG, 2012
61  .
 B.Sudheerprem kumar, Effect of Aging Conditions on Mechanical properties of A16061 Based Hybrid Composite, International Journal of Advances in Engineering Research, Vol No.3, Issue No.4, IJAER, APRIL, 2012
62  .
 B.Sudheerprem kumar, Experimental Investigation on Effect of Injector opening Pressure on the performance and Emission Characteristics of Compression Ignition Engine Fuelled with Vegetable Oil-Ehanol Emulsion, Research Journal of Applied Sciences, Engineering and Technology @ Maxwell Scientific Organization, Maxwell Scientific Organization, 2012
63  .
 B.Sudheerprem kumar, Study of Use of Different Methods of using Vegetable oil as Fuel for compression Ignition Engine, Global Journal of Researches in Engineering: A Mechanical and Mechanics Engineering (USA), ISBN No.Online ISSN: 2249-4596 & print ISSN: 0975-5861, Vol No.12, Issue No.4, GJRE, July, 2012
64  .
 B.Sudheerprem kumar, Comparative Analysis of Mahua and Honne oils as Alternative Bio-Diesel fuel in Agricultural CI Engine, International Journal of Engineering Research and Industrial Applications, ISBN No.0974-1518, Vol No.5, Issue No.1, IJER, Feb, 2012
65  .
 B.Sudheerprem kumar, Experimental Investigation on effect of Injection timing on Performance, Combustion and emission characteristics Compression Ignition Engine fuelled with Vegetable oil – Ethanol Emulsion, International Journal of Energy and Environment, ISBN No.ISSN 2076-2895(Print), ISSN 2076-2909(online), Vol No.3, IJEE, 2012
66  .
 B.Sudheerprem kumar, Performance and Emission Characteristics of straight vegetable Oil-Ethanol Emulsion in a compression ignition Engine, ARPN Journal of Engineering and Applied Sciences, ISBN No.ISSN 1819-6608, Vol No.7, Issue No.4, ARPN JEAS, APRIL, 2012
67  .
 B.Sudheerprem kumar, Performance Evaluation, Emission Characteristics and Economic Analysis of Four Non-Edible Straight Vegetable oils on a single cylinder CI Engine, ARPN Journal of Engineering and Applied Sciences, ISBN No.ISSN 1819-6608, Vol No.7, Issue No.2, ARPN JEAS, Feb, 2012
68  .
 B.Sudheerprem kumar, The State of the Art Research on Homogeneous Charge Compression Ignition (HCCI) Engines, Resent Advances and challenges in Energy – 2012 in Manipal Institute of Technology, RACE, January 4-6, 2012
69  .
 B.Sudheerprem kumar, Wear Properties of Aluminium 7075 based metal matrix composites reinforced with fly ash particulars, Presented in 26th Indian Engineering Congress, at The Institute of Engineers held at Bangalore, Karnataka, IEC, 15-18 December, 2011
70  .
 B.Sudheerprem kumar, Influence of Carbon Dioxide and Methane of Biogas in Biogas-Diesel Dual Fuel Engine, Published in International Journal of Applied Engineering Research, ISBN No.0973-4562, Vol No.6, Issue No.9, IJAER, 2011
71  .
 B.Sudheerprem kumar, The Effect of Age Hardening Temperature on the dry sliding Wear Behavior of A356.0Alloy, International Journal on Mechanical & Automobile Engineering, ISBN No.0974- 231X, Vol No.14, Issue No.1, IJMAE, March 2011- May 2011, 2011
72  .
 B.Sudheerprem kumar, Dry Abrasive Wear Studies on Al-7.25Si-0.45Mg Alloy, International Journal of Material Science, ISBN No.0973-4589, Vol No.6, Issue No.1, IJMS, 2011
73  .
 B.Sudheerprem kumar, Investigation on Performance of Compression Ignition Engine Fuelled with Vegetable Oil-ethanol Emulsions, International Journal of Engineering Research and Technology, ISBN No.0974-3154 , Vol No.4, Issue No.3, IJERT, 2011
74  .
 B.Sudheerprem kumar, Investigation on Performance of Compression Ignition Engine Fuelled with Vegetable Oil-ethanol Emulsions, International Journal of Engineering Research and Technology, ISBN No.0974-3154 , Vol No.4, Issue No.3, IJERT, 2011
75  .
 B.Sudheerprem kumar, Mechanical and Electrical Engineering Aspects of Long-distance Underground Power Transmission, International Journal of Mechanical Engineering and Materials Science, ISBN No.0974-584X, Vol No.4, Issue No.2, IJMEMS, July-December , 2011
76  .
 B.Sudheerprem kumar, Optimization of biodiesel production from oils and fats with high free fatty acids, Indian Journal of Science and Technology, ISBN No.0974-6846, Vol No.3, Issue No.3, IJST, MARCH, 2010
77  .
 B.Sudheerprem kumar, Effect of Methyl Esters of Cotton seed oil as a fuel on the performance of four stroke water cooled diesel engine, National Conference on Advances in Mechanical Engineering, AIM-2010, 18th -19th November , 2010
78  .
 B.Sudheerprem kumar, Experimental Investigation on a phase change Material Encapsulated Building Roof for cooling Application, Engineering Today Monthly Journal, ISBN No.0974-8377, Vol No.12, Issue No.8, ETMJ, AUG, 2010
79  .
 B.Sudheerprem kumar, The Study of Mechanical Properties and Fatigue Behaviour of Al-7.25 Si-0.45 Mg Alloy, International Journal on Mechanical & Automobile Engineering, ISBN No.0974-231X, Vol No.11, Issue No.1, IJMAE, SEP-NOV, 2010
80  .
 B.Sudheerprem kumar, The Effect of Sliding Speed on the Dry Sliding wear Behavior of Al7.25Si-0.45Mg Alloy, International Journal on Mechanical & Automobile Engineering, ISBN No.0974- 231X, Vol No.8, Issue No.3, IJMAE, DEC-2009 TO FEB2010, 2010
81  .
 B.Sudheerprem kumar, Formation of Metal Matrix composites of Aluminum (7075) reinforced with Mica particulars and evaluation of its hardness, International conference on Novel Applications of Nano Technology, NANO T10, 29 Sep-Oct 1, 2010
82  .
 B.Sudheerprem kumar, The Effect of Sliding Velocity on the Dry Sliding wear Behaviour of Heat Treated Al-7.25Si-0.45Mg Alloy, International Journal of Material Science, ISBN No.0973-4589, Vol No.5, Issue No.6, IJMS, 2010
83  .
 B.Sudheerprem kumar, The Effect of Heat Treatment on the Dry Sliding wear Behavior of A356.0Alloy, International Journal on Mechanical &Automobile Engineering, ISBN No.0974-231X, Vol No.9, Issue No.1, IJMAE, March 2010-May 2010, 2010
84  .
 B.Sudheerprem kumar, Formation of Metal Matrix Composite of Aluminium(7075) Reinforced with Mica Particulates and Evaluation of Its Hardness, International Conference on Novel Application of Nano Technology, in Arunai Engineering College, Sep 29 – Oct 1, 2010
85  .
 B.Sudheerprem kumar, Effect of Methyl Esters of Cotton seed oil as a fuel on the performance of Four Stroke Water Cooled Diesel Engine, National Conference on Advances in Mechanical Engineering, AIM-2010, 18th -19th November, 2010
86  .
 B.Sudheerprem kumar, Technology for biodiesel production from used cooking oil – A Review, Energy for Sustainable Development (Elsevier), Elsevier, 2010
87  .
 B.Sudheerprem kumar, Application of Taguchi Experimental Design for optimization of Biodiesel production by Transesterification of used Cooking Oil with Methanol, International Journal of Applied Engineering Research, ISBN No.0973-4562, Vol No.6, Issue No.13, IJAER, 2010
88  .
 B.Sudheerprem kumar, Effects of Diesel – Water Emulsion and its Combustion in Diesel Engines, International conference on Computational Methods in Engineering & Sciences, ICMES-2009, 8-10th January , 2009
89  .
 B.Sudheerprem kumar, Oxidation of Aldehydes from the Exhaust Gases of C.I. Engine using Alcohol blends with Diesel in Semi-Adiabatic Air-Gap Copper Crown Piston as Unconventional Catalytic Converter, 7th Aisa-Pacific Conference on Combustion, at National Taiwan University, Taipei, Taiwan, 24-27 May , 2009
90  .
 B.Sudheerprem kumar, Experimental Studies in a Single Cylinder Diesel Engine Using Palm Oil as Alternative Fuel, International Journal of Applied Engineering Research, ISBN No.0973-4562, Vol No.4, Issue No.7, IJAER, 2009
91  .
 B.Sudheerprem kumar, Performance Analysis of a Single Cylinder Diesel Engine using Cotton Seed Oil, International Journal of Applied Engineering Research, ISBN No.0973-4562, Vol No.4, Issue No.7, IJER, 2009
92  .
 B.Sudheerprem kumar, Effect of Diesel –Water Emulsion and its combustion in Diesel Engines, International Conference on Computational Methods in Engineering Science, ICMES, JAN, 2009
93  .
 B.Sudheerprem kumar, Calculation of Underground Cable Ampacity, International Journal of Innovations in Electrical Power Systems, Vol No.1, Issue No.2, IJIEPS, July-December , 2009
94  .
 B.Sudheerprem kumar, Performance Evaluation of a low Heat Rejection CI Engine using Vegetable Oils, International Journal of Multidisciplinary Research and Advances in Engineering, ISBN No.0975-7074, Vol No.1, Issue No.1, IJMRAE, 2009
95  .
 B.Sudheerprem kumar, Calculation of Underground Cable Ampacity, International Journal of Innovations in Electrical Power Systems, Vol No.2, Issue No.2, IJIEPS, July –December , 2009
96  .
 B.Sudheerprem kumar, Performance Evaluation of a low Heat Rejection CI Engine using Vegetable Oils, ASME International Mechanical Engineering Cogress and Exposition, IMECE 2008, October 31 – Novermber 6, 2008
97  .
 B.Sudheerprem kumar, Feasibility Study of Alternate Fuels in a DI-CI Engine, Research Journal of Engineering and Technology, Vol No.1, Issue No.1, RJET, April –June, 2008
98  .
 B.Sudheerprem kumar, Investigations on the use of CNG in a Compression Ignition Engine, Engineering Today , ISBN No.0974-8377, Issue No.15, Engineering Today, AUG, 2006
99  .
 B.Sudheerprem kumar, Three zone model to Predict the performance of a four stroke direct Injection Diesel Engine, Journal of Engineering Today, ISBN No.0974-8377, Vol No.VII, Issue No.15, pp.20-23, JET, OCTOBER, 2005
100  .
 B.Sudheerprem kumar, Simulation of a phase change Material Encapsulated Building Roof for Cooling Application, Technology World Quarterly Journal, ISBN No.2180-1614, Vol No.V, Issue No.1, TWQJ
    International Conference
1  .
B.Sudheerprem kumar, Development of Mathematical Model for Metal Removal Rate on EDM using Copper & Brass Electrodes, 7th International Conference on Materials Processing and Characterization (ICMPC-2017), ICMPC-2017, MARCH, 2017
2  .
B.Sudheerprem kumar, Development of Mathematical Model for Metal Removal Rate on EDM using Copper & Brass Electrodes, 7th International Conference on Materials Processing and Characterization (ICMPC-2017), ICMPC-2017, MARCH, 2017
3  .
B.Sudheerprem kumar, Comparative studies on exhaust emissions of carbureted methanol and crude Jatropha oil of high grade semi adiabatic Diesel engine and conventional engine, International conference on recent trends in engineering, science and technology, Hyderabad, India, ELSEVIER, 1st JUNE, 2016
4  .
B.Sudheerprem kumar, Comparative Studies on Exhaust Emissions of Waste Fried Vegetable Oil in Crude Form and Bio diesel of High Grade Semi Adiabatic Diesel Engine, International conference on recent trends in engineering, science and technology, Hyderabad, India, ELSEVIER, 1st JUNE, 2016
5  .
B.Sudheerprem kumar, Effects of Alumina Nano Metal Oxide Blended Palm Stearin Methyl Ester Bio-Diesel on Direct Injection Diesel Engine Performance and Emissions, International Conference on Advanced Material Technologies (ICAMT)-2016, ICAMT-2016, 27th and 28th December, 2016
6  .
B.Sudheerprem kumar, Effect Of EGR On Exhaust Emissions Of CI Engine Using Biodiesel Blends, Presented & Published in International Conference on Emerging Trends in Science Technology Engineering and Management (ICETSTEM-2015) at Malla Reddy Engineering College, ICETSTEM-2015, October 9th & 10th, 2015
7  .
B.Sudheerprem kumar, Performance and analysis of Diesel engine at various injection timingsunder various cooling rates during shorter injection period, 4th International conference on Materials Processing and Characterization, ISBN No.1672-1681, ELSEVIER, 2015
8  .
B.Sudheerprem kumar, Experimental investigation on performance evaluation of a single basin solar still using different energy absorbing materials, Proceeding of the ASME 2014 8th international conference on energy sustainability ES2014, Boston, Massachusetts,USA , ASME 2014, JUNE 30 - JULY2, 2014
9  .
B.Sudheerprem kumar, Experimental Investigation on performance Evaluation of a single basin solar still using different energy absorbing materials, Published in Proceedings of the ASME 2014, 8th International Conference on Energy Sustainability ES2014, June 30-July 2, 2014
10  .
B.Sudheerprem kumar, Optimization of Engine Operating Parameters, Presented in 2nd International Conference on Current Trends in Engineering and Mangement(ICCTEM2014); in Vidyavardhaka College of Engineering, Mysore, ICCTEM 2014, 17-19, July , 2014
11  .
B.Sudheerprem kumar, Critical Technical Aspects of Biodiesel Production, published in proceeding of the 3rd International Conference on Advances in Mechanical Engineeirng at S.V. National Institute of Technology, Surat., ICAME, January 4-6, 2010
12  .
B.Sudheerprem kumar, Evaluation of hardness and tensile properties of Al 7075 based composite, International conference on Advanced materials, Manufacturing, Management & Thermal Sciences(AMMMT-2010) at Siddaganaga Institute of Technology, Tumkur, Karnataka, AMMMT-2010, 18&19th November, 2010
13  .
B.Sudheerprem kumar, Low Cost Feedstock for the production of Biodiesel, published in proceeding of the International Conference on Issues and challenges in Energy Conversation and management at Institute of Technology, Banaras Hindu University, Varanasi., December 18-20, 2009
14  .
B.Sudheerprem kumar, Experimental Investigation on the Performance of Thumba Oil and its Blends in a single cylinder Compression Ignition Engine, Published in International Conference on IC Engines and Combustion (ICONICE) at JNTU, Hyderabad., ICONICE, Dec , 2007
15  .
B.Sudheerprem kumar, The State of the Art Research of NOx Reduction in Diesel Engine, International Conference on IC Engines and Combustion (ICONICE) at JNTU, Hyderabad., ICONICE, Dec, 2007
16  .
B.Sudheerprem kumar, Computer Aided Design and Balanced Systems Selection of Split Air Conditioning Unit, International Conference CLIMA (2007) at Helsinki, Finland, CLIMA (2007) , June, 2007
17  .
B.Sudheerprem kumar, Phenomenological three zone model prediction for fuel spray penetration and air entrainment of 4 stroke CI Engine., 19th International Congress of Mechanical Engineering Brasilla Df, ICME, Nov, 05-09, 2007
18  .
B.Sudheerprem kumar, Experimental Study of Emission Characteristics of A Palm oil Fuelled 5HP Kirloskar Diesel Engine, Published in International Conference on IC Engines and Combustion (ICONICE) at JNTU, Hyderabad., ICONICE, Dec, 2007
19  .
B.Sudheerprem kumar, Study of Performance & Emission Characteristics of a Virgin Oil in a Semi-Adiabatic Engine, Published in International Conference on IC Engines and Combustion (ICONICE) at JNTU, Hyderabad., ICONICE, DEC, 2007
20  .
B.Sudheerprem kumar, Feasibility of three dimensional computations to predict in cylinder flow field, IFAMS 2000 – International Conference at C.I.T., Coimbatore Jan’2000. This Paper bagged Best Paper Award., IFAMS 2000, 2000
21  .
B.Sudheerprem kumar, Analysis of Turbo Machinery using stream line curvature technique, IFAMS 2000 – International Conference at C.I.T., Coimbatore, IFAMS 2000, Jan, 2000
22  .
B.Sudheerprem kumar, Analysis of Turbo machinery flows Using Streamline Curvature Technique, IFAMS 2000 – International Conference at C.I.T., Coimbatore, IFAMS 2000, Jan, 2000
23  .
B.Sudheerprem kumar, Challenges ahead – Need for the multidimensional modeling of I.C. Engines, IFAMS 2000 – International Conference at C.I.T., Coimbatore, IFAMS 2000, Jan, 2000
24  .
B.Sudheerprem kumar, Feasibility of Three Dimensional Computations to Predict in-cylinder flow field, International Conference of Intelligent flex Autonomous Manufactureing Systems (IFAMS 2000), IFAMS 2000, 2000
25  .
B.Sudheerprem kumar, T.S.R’s as auto savers for the editors WS and NE, INCARF’93 – International Conference at I.I.T., Delhi, INCARF’93, Dec, 1993
26  .
B.Sudheerprem kumar, Air Standard Cycles demonstration using Computer Graphics, INCARF’93 – International Conference at I.I.T., Delhi, INCARF’93, Dec, 1993
    National Conference
1  .
B.Sudheerprem kumar, Heat Transfer Enhancement in a Double Pipe Heat Exchanger using Nano Fluids, Presented & Published in the proceedings of the 17th ISME Conference at IIT Delhi, New Delhi., 17th ISME , during October 3-4, 2015
2  .
B.Sudheerprem kumar, Experimental Investigations on Turbulent flow Heat Transfer Enhancement in a Horizontal Tube Using Inserts, Presented & Published in the proceedings of the 17th ISME Conference at IIT Delhi, New Delhi., 17th ISME , October 3-4,, 2015
3  .
B.Sudheerprem kumar, Experimental investigations on turbulent flow heat transfer enhancement in a horizontal tube using inserts, 17th ISME Conference on Advances in Mechanical Engineering IIT Delhi., ISME, 3rd & 4th October, 2015
4  .
B.Sudheerprem kumar, Experimental investigations on heat transfer enhancement in a horizontal tube using converging and diverging conical strips, Proceeding of the ASME 2014 Gas turbine India conference GTINDIA 2014,New Delhi,India., December 15-17, 2014
5  .
B.Sudheerprem kumar, Experimental Investigation on Heat Transfer Enhancement in a Horizontal Tube using Converging and Diverging Conical Strips, Published in Proceedings of the ASME 2014, Gas Turbine India Conference GTINDIA-2014, GTINDIA-2014, December 15-17, 2014
6  .
B.Sudheerprem kumar, Influence of reinforcements and heat treatment on hardness of A-Zn-Mg based hybrid composites, published at National Conference on Emerging Trends in Engineering & Mangement(NCETEM-13) organized by PES Institute of Technology & Management, Shivamogga, Karnataka, NCETEM-13, 01-02 March, 2013
7  .
B.Sudheerprem kumar, Effect of Varying Operating Conditions on Performance of CI Engine with Different Blends of Methyl Ester of Neem Oil, Published in National Conference on ETRE at GNDEC, Bidar., 12-13 April, 2012
8  .
B.Sudheerprem kumar, Evaluation of Hardness and Corrosion Resistance of Aluminium base hybrid composite, Presented at 26th Indian Engineering Congress 2011, Bangalore, 15th -18th December, 2011
9  .
B.Sudheerprem kumar, Microstructure and Dry Sliding Wear Behavior of Heat Treated(T4) A356.0 Alloy, Published in National Conference on Emerging Trends in Mechanical Engineering – NCETME 2011., NCETME 2011., 2011
10  .
B.Sudheerprem kumar, Corrosion Studies on Heat Treated A356.0 Alloy, Published in National Conference on Emerging Trends in Mechanical Engineering – NCETME 2011., NCETME 2011., 2011
11  .
B.Sudheerprem kumar, Quenching Effects on wear properties of A16061 based hybrid composte, Presented at Advanced Materials, Manufacturing, Management and Thermal Sciences(AMMMT-2010) at SIT Tumkur, AMMMT-2010, 18th -19th November, 2010
12  .
B.Sudheerprem kumar, Feedstocks for Biodiesel Production-A Review, Published in Proceedings of the National Conference on Recent Trends in Mechanical Engineering, at Vemana Institute of Technology, Bangalore, India., November 23-24,, 2009
13  .
B.Sudheerprem kumar, Heat Treatment Effects on Mechanical properties of AL6061 alloy based hybrid composite, at Recent Trends in Engineering & Technology (RTIES-2008) at RLJIT, RTIES-2008, 21st and 22nd Nov , 2008
14  .
B.Sudheerprem kumar, Concepts of single zone scavenging models and reed valves, MENAC 2001, JNTUCEA, MENAC 2001, OCT, 2001
15  .
B.Sudheerprem kumar, Low Heat Rejection Engines, MENAC 2001, JNTUCEA, Oct, 2001
16  .
B.Sudheerprem kumar, Numerical Solution of developing flow in a vertical channel with asymmetric wall temperature, MENAC 2000, JNTUCEA,, MENAC 2000, June, 2000
17  .
B.Sudheerprem kumar, The Future of the Diesel Engine for personal transportation, MENAC 2000, JNTUCEA, MENAC 2000, JUNE, 2000
18  .
B.Sudheerprem kumar, Prediction of the effect of Offset Bowl in piston on the fluid flow and spray distribution in a D.I., Diesel engine cylinder, National Conference on fluid flow characteristics, I.I.T., Kanpur, April, 1999
19  .
B.Sudheerprem kumar, Study and analysis of C.I. Engine (4 Stroke) working conditions preparation of graphs using computers, X – ISME Conference, Delhi College of Engineering, Delhi, X – ISME Conference, December, 1996
20  .
B.Sudheerprem kumar, Balanced System Selection in Refrigeration Applications, VIII-ISME Conference, I.I.T. Delhi, March, 1993
21  .
B.Sudheerprem kumar, PEM Fuel Cell – Future Source of Energy, Published in National Conference on “Emerging Trends in Mechanical Engineering, at Raja Rajeshwari College of Engineering, Bengaluru.