International Journals
1  .
 Balu Naik Banoth, Development of a composite materials from agro waste for wear resistance application, Journal of Chemistry and Chemical Engineering, ISBN No.ISSN: 1934-7375M, 2014
2  .
 Balu Naik Banoth, Formability Studies of ASS 304 and evaluations of friction for AI in deep drawing setup at elevated temperature using LS-DYNA, Journal of King Saud University – Engineering Sciences (2014), pp.21-31, 2014
3  .
 Balu Naik Banoth, Some aspects of formability of ASS 304 under conditions, Journal of Manufacturing Engineering, Vol No.8, pp.221-224, December, 2013
4  .
 Balu Naik Banoth, Development of Indirect resistance spot welding for automotive application, Publication International Journal of Advanced Materials Manufacturing & Characterization., Vol No.1, Issue No.2, pp.199, October , 2012
5  .
 Balu Naik Banoth, Ingredients Compositions formulations and development of anew metal matrix composite for friction lining applications using MINITAB16, International Journal of Engineering and Technology, Publishers GSTF, Singapore, ISBN No.ISSN: 2251-3701, Vol No.1, Issue No.1, pp.99-104, June, 2012
6  .
 Balu Naik Banoth, Effect of grit size and abrasive type on surface of machined AL-SIC MMC, International Journal of Manufacturing Engineering SMF Publications, ISBN No.ISSN: 0973-6867, Vol No.7, Issue No.2, pp.67-71, June, 2012
7  .
 Balu Naik Banoth, Experimental Investigations of process parameters of electro discharge sawing, a modified EDM using TAGUCHI approach., International journal of emerging technology and advanced engineering, 11, 2012
8  .
 Balu Naik Banoth, Reengineering treatment in Block Replacement Decision Using Higher Order Markow Chains, IUP Journal of Operations Management , ISBN No.ISSN 0972-6888, Vol No.10, Issue No.4, pp.1-17, 2011
9  .
 Balu Naik Banoth, First Order Markov Chain Modeling for Replacement of Computers, International Journal of applied Engineering Research, ISBN No.ISSN 0973-4562, Vol No.7, pp.861-871, 2011
10  .
 Balu Naik Banoth, Deployment of Mathematical Model for Group Replacement of Electronic System Using Markov Chains, International Journal Technology Today, ISBN No.ISSN 2180-0987, Vol No.8, Issue No.1, pp.175-182, January, 2011
11  .
 Balu Naik Banoth, Development of bio-degradable friction material for brake pads form Palm Kernel Sheel, International Journal of Mechanical Engineering and Materials Science , ISBN No.ISSN:0974-584X, Vol No.4, Issue No.1, pp.1-6, June, 2011
12  .
 Balu Naik Banoth, Performance and emission characteristics of adisel engine with kanuga and cotton seed oil As alternate flues, Publication of International Journal of Mechanics and Thermodynamics, Vol No.1, Issue No.1, pp.1-11, 2010
13  .
 Balu Naik Banoth, Prediction of Surface Roughness in Machining of Homogenized SICP Reinforced Aluminum Metal Matrix Composites Using Multiple Regression Analysis, Publication of International Journal of Manufacturing Science and Technology, Vol No.4, Issue No.2, pp.81-91, December, 2010
14  .
 Balu Naik Banoth, Effect of Process Parameters on Mechanical Properties of Friction Stir Welding Aluminum/Copper Lap Joint, Publication of International Journal of Manufacturing Science and Technology, Vol No.4, Issue No.2, pp.149-161, December, 2010
15  .
 Balu Naik Banoth, 17. Evaluation of Tension-Shear stress for single and multi spot welds: Direct and indirect Techniques, International Journal of Manufacturing Science and Technology, Vol No.3, Issue No.1, pp.59-80, 6, 2009
16  .
 Balu Naik Banoth, Applications of Design of Experiments on Direct and Indirect Resistance Spot Welding for Low Carbon Steel Sheet Fabrication, International Journal of Manufacturing Science & Technology , pp.11-28, 6, 2008
17  .
 Balu Naik Banoth, Design Approach for Automotive spot welding, International Journal of Manufacturing Science & Technology , 12, 2008
18  .
 Balu Naik Banoth, Heat balance studies in Resistance Spot welds, International Journal of Highly reliable Electronics Systems, Vol No.1, Issue No.2, International Science press, 12, 2008
    National Journals
1  .
Balu Naik Banoth, Block Replacement Modeling for Electronics Systems with Higher Order Markov Chains, UP Journal of Computational mathematics, ISBN No.ISSN 0974-6544, Vol No.4, Issue No.2, pp.49-63, June, 2011
2  .
Balu Naik Banoth, Performance and emission characteristics a diesel engine with kanuga and cotton seed oil as alternate fuels, Publications of Technology Spectrum, Journal of Jawaharlal Nehru Technological University, Vol No.4, Issue No.3, November, 2010
    International Conference
1  .
Balu Naik Banoth, Friction Stir Welding of AZ31 MG Alloy, International Conference on Engineering Trends in Mechanical Engineering, 24th - 25th February , 2014
2  .
Balu Naik Banoth, Study of Formability and Thickness Distribution in Warm Forming of ASS 304, 4th International & 25th AIMTDR Conference , 2012
3  .
Balu Naik Banoth, Study of Micro hardness of Deep Drawn Cups for Austenitic Stainless stell-304 under warm Conditions, International Conference, PP: 16 and participated in the HNS-2012 conference, 27th to 29th September, 2012
4  .
Balu Naik Banoth, Experimental Investigation of Punch load of ASS 304 at various Temperatures, International Conference on Materials Processing and characterization, March 8-10, 2012
5  .
Balu Naik Banoth, Micro hardness Studies of Austenitic Stainless Steel-304, International Conference on Materials Processing and Characterization, March 8-10, 2012
6  .
Balu Naik Banoth, Simulation and experimental investigation of AA 304 at Various temperatures in warm deep drawing forming Process, International Conference on Smart Systems (ICSS-2013), 07-08 October, 2012
7  .
Balu Naik Banoth, Ingredients Compositions Formulations and development of a new metal matrix composite for friction Lining applications using MINITAB16, Annual International Conference on Materials Science, Metal & manufacturing (M3 2011), ISBN No.ISSN:2251-1857, Michigan Technological University, December 12-13, 2011
8  .
Balu Naik Banoth, Comparative evaluation of surface finish (Ra) for AL-SicP metal Matrix Composite machining with diamond grinding wheel using multiple regression analysis and ANN(MATLAB), 5th International Conference on Advance in Mechanical Engineering (ICAME-2011), pp.586-591, S.V. National Institute of Technology, Surat, India, June, 2011
9  .
Balu Naik Banoth, Performance of different grinding wheels machining of AL-SiC Metal matrix Composite, International Conference on Futuristic Trends in Materials & Energy Systems FTME 2011, 29-30 December , 2011
10  .
Balu Naik Banoth, Experimental Analysis of Z-Pinned Carbon Fiber Composites, International Conference on Advanced Materials and Manufacturing Technologies (AMMT), ISBN No.978-93-82163-46-6, 2011
11  .
Balu Naik Banoth, Forecast of Price inflation for Electronic Systems, International Conference on Global Interdependence and Decision Sciences (ICGIDS) at Administrative Staff College of India (ASCI), ISBN No.ISBN 0230-32852-0, pp.151-155, 28-30 December , 2009
12  .
Balu Naik Banoth, 38. Forecast of Inflation for Electronic Systems, International Conference on Global Interdependence and Decision Sciences (ICGIDS) at Administrative Staff College of Indian (ASCI), Hyderabad, ISBN No.ISBN 0230-32852-0, pp.151-155, 28-30 December , 2009
13  .
Balu Naik Banoth, Effect of Typical Process Parameters of Electro Discharge Sawing using Taguchi Method, International Congress of 2008, ASME International Mechanical Engineering Congress and Expositions (IMECE-2008), 11, 2008
14  .
Balu Naik Banoth, Thermal Design and Analysis of Avionics, International Conference on 01st Asian Symposium on Computational Heat Transfer and Fluid Flow , 10, 2007
15  .
Balu Naik Banoth, Phenomenological Three Zone Model Prediction for Fuel Spray Penetration and air Entertainment of Four Stroke C.I. Engine, 19th International Congress of Mechanical Engineering (COBEM-2007) , 11, 2007
16  .
Balu Naik Banoth, Review on Bio-Diesel Exhaust at Emission Basic, Standard & Control Measures, International Conference & XX National Conference on I.C Engine & Combustion (ICONICE-2007), 12, 2007
17  .
Balu Naik Banoth, Finite Element Modeling and Analysis of Friction Stir Welding, International Conference of Recent Advances in Materials 2007, 2007
18  .
Balu Naik Banoth, Finite Element Molding of some Fracture Mechanisms, International Conference of recent advances in Material proceeding Technology (RAMPT-2005), pp.265-270, 2, 2005
19  .
Balu Naik Banoth, Development of a composite from agro waste for wear resistance applications, 15th International Conference on Advanced in Materials & Proceeding Technologies (AMOT 2012), ISBN No.PNAM-12007, University of Wollongong, Australia
    National Conference
1  .
Balu Naik Banoth, Characterization of Friction Stir Welded Joint (AZ31) by TAGUCHI, National Conference on Innovation in Mechanical Engineering, 3, 2014
2  .
Balu Naik Banoth, Optimization of process parameters for machining of AL-SiC MMC using Taguchi design, National Conference on Advance in Mechanical Engineering (AMIM 2012), pp.228-233, October 11-12, 2012
3  .
Balu Naik Banoth, Effect of grit size and abrasive type on surface finish of machined AL-SiC MMC, Second National Conference on Recent Advance In Manufacturing, pp.1-6, September 15-17, 2011
4  .
Balu Naik Banoth, P12-Study and analysis of process parameters in granite machining, National Conference on ACME , pp.25-26, 3, 2010
5  .
Balu Naik Banoth, P-27 An analysis of scheduling rules in hypothetical job shop production system, National conference on Advances and Challenges in Mechanical Engineering (ACME-2010), pp.25-26, 3, 2010
6  .
Balu Naik Banoth, D04-Finite element simulation studies on the effect of interface friction in drawing AISI304 stainless steel and AL1100 materials at Constant Blank Holding Force, National Conference on ACME, 03, 2010
7  .
Balu Naik Banoth, Recent advancement in EDM Micro drilling process, National Conference on Trends in Mechanical Engineering (TIME 2010), ISBN No.R10ME045, 25th and 26th February , 2010
8  .
Balu Naik Banoth, P12-Study and Analysis of Process Parameters in Granite Machining, National Conference on ACME Erode Sengunthar Engineering College, Erode, Tamilnadu, 25th-26th March , 2010
9  .
Balu Naik Banoth, P27-An Analysis of Scheduling Rules in a Hypnotically job shop production system, National Conference on ACME Erode Sengunthar Engineering College, Erode, Tamilnadu, 25th-26th March , 2010
10  .
Balu Naik Banoth, D04-Finite Element simulations studies on the Effect of interface friction in drawing AISI 304 stainless steel and AI 1100 Materials at constant holding Force, National Conference on ACME Erode Sengunthar Engineering College, Erode, Tamilnadu, 25th -26th March , 2010
11  .
Balu Naik Banoth, Development of indirect resistance spot welding for automotive applications, Puducheery organizes by Indian Institute of Welding theme National weld MEET 2010, August 6-9, 2010
12  .
Balu Naik Banoth, Development of Friction stir welding of Aluminum to Copper dissimilar materials for electrical industries experimental design result, Puducheery organized by Indian Institute of welding theme National weld meet 2010 , August 6-9, 2010
13  .
Balu Naik Banoth, Optimization of cutting parameters to surface roughness of mild steel an experimental study, National Conference in August 2009, 8, 2009
14  .
Balu Naik Banoth, Development design consideration of warm forming of Aluminum alloy, National Mechanical Conference, 8, 2009
15  .
Balu Naik Banoth, Development and Design Considerations of Warm forming of Aluminum-alloy, National Conference on State of the Art of Technologies in Mechanical Engineering (NCSAME-2009) , JNTUHCEH, Hyderabad., Aug. 20-21, 2009
16  .
Balu Naik Banoth, On the Commercialization Aspects of Solar Hot Water Systems in India, National Conference on State of the Art of Technologies in Mechanical Engineering (NCSANE-2006) , 5, 2006
17  .
Balu Naik Banoth, Bio Gas Energy, National Conference on Computer Applications in Mechanical Engineering (CAME-2005, pp.279-280, 12, 2005
18  .
Balu Naik Banoth, The Prospectus of Solar Energy in Rural Areas, National Conference on Computer Applications in Mechanical Engineering (CAME-2005, pp.277-280, 12, 2005
19  .
Balu Naik Banoth, Energy Audit Approach in Compressed Air-System, National Conference on Computer Applications in Mechanical Engineering (CAME-2005), pp.281-284, 12, 2005
20  .
Balu Naik Banoth, A Solution for Efficient Energy Conservation and Pollution Reduction: Fuel Cell Technology, National Conference on State of the Art of Technologies in Mechanical Engineering (NCSAME-2004), pp.469-476, 6, 2004
21  .
Balu Naik Banoth, Performance Analysis of Two –Stage CONWIP Serial Productions System Under Saturated Condition, National Conference on State of the Art of Technologies in Mechanical Engineering (NCSAME-2004), pp.117-122, 6, 2004