B.V.S.Rao,G. Chandra Mohan Reddy,G. Krishna Mohana Rao, PVR.Ravindra Reddy, Numerical Analysis On The Effect Of Various Parameters On Fracture Limit For Deep Drawn Cups ?, Materials Today:, Vol No.5 , pp.1387-1400, Elsevier, January, 2018

 Padmini Rapeti, Vamsi Krishna Pasam, Krishna Mohana Rao Gurram, Rukmini Srikant Revuru, Performance evaluation of vegetable oil based nano cutting fluids in machining using Grey Relational Analysis-A step towards sustainable manufacturing, Journal of Cleaner Production, Vol No.172, pp.2862-2875, Elsevier, 2018

 Anjaneyulu J, Venkata Rao G, Krishna Mohana Rao G, Dimensional Analysis and Buckingham Pi Theorem Applications in Mechanisms, International Journal of Research in Engineering, Science and Technologies, ISBN No.2454-5392, Vol No.2, Issue No.8, pp.1-6, Deepam Publications, March, 2017

 Ishrat M Mirjana, G.Krishna Mohana Rao, Shoeb Ur Rahman, Zaki Ahmad, Fabrication and Microstructural Study of Functionally graded material disc of SS316/IN625, Materials Today, Vol No.3, Issue No.10, pp.4236-4241, Elsevier, 2016

 Padmini R, P Vamsi Krishna, G. Krishna Mohana Rao, Effectiveness of vegetable oil based nanofluids as potential cutting fluids in turning AISI 1040 steel, Tribology International , Vol No.94, pp.490-501, Elsevier, 2016

 P.Ravi Kumar, Dr.G.Krishna Mohana Rao, Influence Of Cutting Speed And Type Of Damping Inserts On Chip Thickness And Width In End Milling Process, CMR Journal of Engineering and Technology, ISBN No.2455-4677, Vol No.1, Issue No.1, January, 2016

 M. Venkata Ramana, G. Krishna Mohan Rao and D. Hanumantha Rao, Experimental investigations on tool wear in turning of Ti-6Al-4V alloy under different machining environmental conditions, International Journal of Manufacturing Research, 2016

 B V S Rao, G Chandra Mohan Reddy, G Krishna Mohan Rao, P V R Ravindra Reddy, Influence of Drawing Ratio on Thickness Variation along the Walls of Deept Drawn Cups, Journal of Manufacturing Engineering, Vol No.11, Issue No.2, pp.86-93, SME, June, 2016

 B V S Rao, G Chandra Mohan Reddy, G Krishna Mohan Rao, P V R Ravindra Reddy, Numerical Studies on the Effect of Various Parameters on Wrinkling in Deep Drawing of Cylindrical Cups, Manufacturing Technology Today (MTT),, Vol No.16, Issue No.7, pp.5-16, July, 2016

 B.V.S.Rao, G.Chandra Mohan Reddy, G.Krishna Mohan Rao, P.V.R.Ravindra Reddy, Numerical Analysis on the Effect of Friction Coefficient on Wrinkling in Deep Drawing with Linearly Variable Blank Holding Force, International Journal on Mechanical Engineering and Robotics (IJMER), ISBN No.2321-5747, Vol No.4, Issue No.3, 2016

 R Padmini, P Vamsi Krishna and G. Krishna Mohana Rao, Experimental Evaluation of Nano-Molybdenum Disulphide and Nano-Boric acid suspensions in vegetable oil as prospective cutting fluids during turning of AISI 1040 steel, Journal of Engineering Tribology, Vol No.230, Issue No.5, pp.493-505, IMechE, 2016

 Padmini R, P Vamsi Krishna, G. Krishna Mohana Rao, Performance assessment of micro and nano solid lubricant suspensions in vegetable oils during machining, Journal of Engineering Manufacture, Vol No.229, Issue No.12, pp.2196-2204, Institution of Mechanical Engineers, December, 2015

 Ishrat M Mirjana, G.Krishna Mohana Rao, G.Sailaja, S.Irfan Sadak, Mathematical Formulation and Simulation of Functionally Graded Tube, International Journal on Mechanical Engineering and Robotics, ISBN No.2231-5747, Vol No.3, Issue No.1, pp.6-10, IRD India, January, 2015

 Afroz Meher, P.Ravinder Reddy, G.Krishna Mohana Rao, Experimental Analysis of Orthotropic Cylindrical Shell Subjected to Internal Pressure, International Journal on Mechanical Engineering and Robotics, ISBN No.2231-5747, Vol No.3, Issue No.1, pp.11-14, IRD India, January, 2015

 Padmini R, P Vamsi Krishna, G. Krishna Mohana Rao, RR Srikant, Effect of Vegetable Oil Based Nanofluids on Machining Performance: An Experimental Investigation, International Journal of Aerospace and Mechanical Engineering , Vol No.2, Issue No.12, World Academy of Science, Engineering and Technology , 2015

 Bhiksha Gugulothu, D.Hanumantha Rao, G.Krishna Mohana Rao, Optimization of EDM Process parameters and Graphite powder concentration on electrical discharge machining of Ti-6Al-4V alloy using Taguchi method, International Journal of Advances in Production and Mechanical Engineering, ISBN No.2394-6202, Vol No.1, Issue No.5, pp.31-44, August, 2015

 Bhiksha Gugulothu, D.Hanumantha Rao, G.Krishna Mohana Rao, Influence of Parameters and Dielectric Fluids on Electro Discharge Machining of Titanium Alloy, International Conference on Innovative Trends in Mechanical, Material, Manufacturing, Automobile and Aeronautical Engineering (ITMAAE-2015), ISBN No.453-879-870-021-9, pp.480-490, Bapatla Engineering College, Guntur, Andhra Pradesh and “Krishi Sanskriti’’, New Delhi, India, 2015

 B V S Rao, G Chandra Mohan Reddy, G Krishna Mohan Rao, and P V R Ravindra Reddy, Determination of blank size for non-axisymmetric non-standard deep drawn cups, Manufacturing Technology Today (MTT), ISBN No.0972-7396, Vol No.14, Issue No.7, pp.3-14, July, 2015

 J.Anjaneyulu, G. Venkata Rao, G. Krishna Mohana Rao, Theoretical and experimental dynamic analysis of high speed mechanism of a switch gear, International Journal of Applied Engineering Research (IJAER), Vol No.10, Issue No.2, pp.5271-5283, Research India Publications (RI publications), 2015

 Rajendra.M, G. Krishna Mohana Rao, EFECT OF SILICON CARBIDE(SiC) ABRASIVE PARTICLES MIXED IN DIE ELECTRIC FLUID ON THE PERFORMANCE OF EDM BY REGRESSION ANALYSIS, International Journal of Engineering Research and Development, ISBN No.2278-800X, Vol No.11, Issue No.7, pp.35-42, July, 2015

 Srinivasulu P, G Krishna Mohana Rao, EXPERIMENTAL INVESTIGATION OF MECHANICAL PROPERTIES OF FRICTION STIR WELDED AA 6082 ALUMINUM ALLOY BUTT JOINTS, International Journal of Science, Technology & Management, ISBN No.2394-1537, Vol No.4, Issue No.1, pp.815-822, March, 2015

 Srinivasulu P, G Krishna Mohana Rao, OPTIMIZATION OF PROCESS PARAMETERS OF FRICTION STIR WELDED AA6082 ALUMINIUM ALLOYS, International Journal of Advanced Technology in Engineering and Science, ISBN No.2348 - 7550, Vol No.3, Issue No.1, pp.942-952, March, 2015

 Srinivasulu P, G Krishna Mohana Rao, EVALUATION OF BENDING STRENGTH OF FRICTION STIR WELDED AA 6082 ALUMINUM ALLOY BUTT JOINTS, International Journal of Advance Research In Science And Engineering, ISBN No.2319-8354(E), Vol No.4, Issue No.1, pp.1262-1270, March, 2015

 Srinivasulu P, G Krishna Mohana Rao, EFFECT OF PROCESS PARAMETERS ON FRICTION STIR WELDED AA 6061 ALUMINUM ALLOY BUTT JOINTS., ISBN No.2319-8354(E), Vol No.4, Issue No.1, pp.503-519, March, 2015

 S.R. Chandramouli, G. Krishna Mohana Rao, End Effector Mounted Robot Arm Kinetics for Redundant Rigid and Flexible Links Manipulators, International Journal of Emerging Technology and Advanced Engineering, ISBN No.2250-2459, Vol No.5, Issue No.8, pp.110-115, August, 2015

 M.Venkataramana, G.Krishna Mohana Rao, D. Hanumantha Rao, Optimization and Investigation into the Effect of Cutting Conditions on Surface Roughness in Turning of Ti-6Al-4V Alloy under Different Machining Environments, Journal of Manufacturing Science and Production, Vol No.15, Issue No.2, pp.197-204, 2015

 Mojtaba Gholamian, G.Krishna Mohana Rao, Panitapu Bhramara, Flow Pattern and Efficiency Changes of Squirrel Cage Fans due to Inlet Diffuser Diameter Changes - Suing CFD Method and Experimental Validation, Applied MEchanics and Materials, Vol No.446-447, pp.626-630, Trans Tech Publications, Switzerland, 2014

 Mojtaba Gholamian, G.Krishna Mohana Rao, Panitapu Bhramara, Effect of Axial Gap between Diffuser Inlet and Impeller on Efficiency and Flow Pattern of Centrifugal Fans, Applied MEchanics and Materials, Vol No.446-447, pp.621-625, Trans Tech Publications, Switzerland, 2014

 A.Lakshminarayana, G.Krishna Mohana Rao, R.Vijaya Kumar, Buckling analysis of rectangular composite plates with rectangular cutout subjected to linearly varying in-plane loading using FEM, Sadhana, 2014

 M.Venkata Ramana, G.Krishna Mohana Rao, D. Hanumantha Rao, Chip Morphology in Turning of Ti-6Al-4V alloy under different Machining conditions, Journal of Production Engineering, Vol No.17, Issue No.1, pp.27-32, 2014

 M.Venkata Ramana, G.Krishna Mohana Rao, D. Hanumantha Rao, Optimization and effect of process parameters on tool wear in turning of Titanium alloy under different machining conditions, Int. J of Materials, Mechanics and Manufacturing , Vol No.2, Issue No.4, pp.272-277, 2014

 P.Ravi Kumar, Dr.G.Krishna Mohana Rao, Theoretical and Experimental analysis of End Milling Process with Multiple finger inserted cutters, International Journal of Mechanical and Mechatronics Engineering, Vol No.1, Issue No.5, May, 2014

 P.Ravi Kumar, Dr.G.Krishna Mohana Rao, Optimization of Metal removal rate in End Milling using Taguchi method and ANOVA, 3rd International Conference on Recent trends in Engineering & technology (ICRTET 2014),Organized by SNJB's Late Sau. K. B. Jain College of Engineering, Chandwad (Nashik), MH, India, ISBN No.978-93-5107-222-5, Elseveir Science & Technology , March, 2014

 Rajendra.M, G. Krishna Mohana Rao, EXPERIMENTAL EVALUATION OF PERFORMANCE OF ELECTRICAL DISCHARGE MACHINING OF D3 DIE STEEL WITH Al2O3 ABRASIVE MIXEDDIELECTRIC MATERIAL BY USING DESIGN OF EXPERIMENTS., International Journal of Research in Engineering and Technology, ISBN No.2321-7308, Vol No.3, Issue No.1, pp.599-608, January, 2014

  B. Surekha, D. Hanumantha Rao, G. Krishna Mohana Rao, Pandu R. Vundavilli , Design and development of knowledge-base scheme for chromite-based resin bonded sand core system, Procedia Material Science, Vol No.6, pp.919-925, Elsevier, September, 2014

 Mojtaba Gholamian, G.Krishna Mohana Rao, Panitapu Bhramara, Numerical Investigation on effect of inlet nozzle size on efficiency and flow pattern in squirrel cage fan, Journal of Power and Energy, Vol No.227, Issue No.8, pp.896-907, sage, 2013

 Mojtaba Gholamian, G.Krishna Mohana Rao, Panitapu Bhramara, Effect of Axial gap between inlet nozzle and impeller on efficiency and flow pattern in centrifugal fans, numerical and experimental analysis, Case Studies in Thermal Engineering, Vol No.1, pp.26-37, Elsevier, 2013

 G.Krishna Mohana Rao, Vijay Mohan, Experimental Analysis of Passive Damping Technique on Conventional Radial Drilling Machine Tool Bed Using Composite Materials, International Journal of Mining, Metallurgy & Mechanical Engineering, ISBN No.2320-4060, Vol No.1, Issue No.2, 2013

 G.Krishna Mohana Rao, Chandra Mouli, Overview of Kinematics Design of Multi Section Planar Continuum Robot, International Journal of Engineering Research and Technology, Vol No.2, Issue No.1, January, 2013

 G.Krishna Mohana Rao, B V S Rao, G Chandra Mohan Reddy, Low cost Knowledge base system for design of deep drawing die set, International Journal of MEchanical Engineering and Robotics REsearch, ISBN No.2278-0149, Vol No.2, Issue No.1, January, 2013

 Tarak Nath De, S Sundararajan, G.Krishna Mohana Rao, Optimum Size Selection for Spring Loaded Detachable Canister Launch Vehicle Interface for Multistage Long Range System, International Journal of engineering Trends and Technology, ISBN No.2231-5381, Vol No.5, Issue No.1, pp.1-9, November, 2013

 R Padmini, P Vamsi Krishna , G. Krishna Mohana Rao and R R Srikant, 1. Experimental investigation on the application of vegetable oil based nanofluids in machining, Journal of Mechanical Engineering, Vol No.54, Issue No.1, pp.121376-121382, 2013

 Krishna Mohana Rao Gurram, R. Padmini, P. Vamsi Krishna, 2. Application of nano cutting fluids to machining: An experimental investigation, J Nanomed Nanotechnol, Vol No.4, Issue No.6, 2013

 A.Lakshmi narayana ,Krishnamohana rao and Vijaya Kumar.R, FEM buckling analysis of quasi-isotropic symmetrically laminated rectangular composite plates with a square/rectangular cut, Journal of Mechanical Science and Technology, Vol No.27, Issue No.5, pp.1427-1435, 2013

 A.Lakshmi narayana ,Krishnamohana rao and Vijaya Kumar.R, Effect of location of cutout and plate aspect ratio on buckling strength of rectangular composite plate with square/rectangular cutout subjected to various linearly varying in-plane loading using FEM, International Journal of Mechanics, Vol No.7, Issue No.4, pp.508-517, 2013

 Afroz Meher, P.Ravinder Reddy, G.Krishna Mohana Rao, Delamination of an orthotropic cylinder shell with helically wound fiber reinforcement when subjected to axial compression, International Journal of Advanced Trends in Computer Science and Engineering , Vol No.2, Issue No.1, pp.135-138, 2013

  B. Surekha, D. Hanumantha Rao, G. Krishna Mohana Rao, Pandu R. Vundavilli and Mahesh B. Parappagoudar, Application of response surface methodology for modeling the properties of chromite-based resin bonded sand cores, International Journal of Mechanics, Vol No. 7, Issue No.4, pp.443-458, October, 2013

 G.Krishna Mohana Rao, B V S Rao, G Chandra Mohan Reddy, Parametric Studies on Wrinkling and Fracture Limits in Deep Drawing of Cylindrical Cup, International Journal of Emerging Technology and Advanced Engineering, ISBN No.2250-2459, Vol No.2, Issue No.6, June, 2012

 Ishrat M. Mirzana, G. Krishna Mohana Rao & G.Rama Murthy, Rapid Calculation Procedure for the Analysis of a Functionally Graded Tube Subjected to Internal Pressure Under Plane Strain Condition, Int. J. for Computational Methods in Engg. Science and Mechanics, ISBN No.1550-2287, Issue No.14, pp.24-31, Taylor & Francis, 2013

 P.Ravi Kumar, G.Krishna Mohana Rao, Optimization of Surface Roughness in Damper Inserted End Milling Using Taguchi Method and ANOVA, J. Manuf. Sci. Prod., Vol No.12, Issue No.3-4, pp.147-154, De Gruyter, 2012

 B. V. S. Rao, G. Chandra Mohan Reddy, G. Krishna Mohana Rao, P. Ranadheer & P. V. R. Ravindra Reddy, Low Cost Knowledge Base System for Design of Deep Drawing Die Set, Int. J. Mech. eng. & Rob. Res., ISBN No.2278-0149, Vol No.2, Issue No.1, pp.246-253, IJMERR, 2013

 G.Krishna Mohana Rao, G Ranga Janardhana & M srinivasa Rao, Optimal Machining Parameters on Die Sinking EDM Using Taguchi Technique on Aluminium Alloy(HE-20), Int J of Manuf Sci and Tech, Vol No.1, Issue No.2, pp.103-116, Serials Publications, 2007

 S Satyanarayana, G Krishna Mohana Rao, Rami Reddy p & M Komariah, Characterization of Electric Discharge Machined Surface of Inconel718, Int J of Manuf Sci and Tech, Vol No.1, Issue No.2, pp.81-102, Serials Publications, 2007

 M Ramalinga Reddy, P Ravi Kumar & G Krishna Mohana Rao, Effect of Feed Rate on the Generation of Surface Roughness in Turning, Int J of engg and Tech, ISBN No.0975-5462, Vol No.3, Issue No.11, pp.8099-8105, 2011

 M Ramalinga Reddy, Late V S R Murthy, P Ravi Kumar & G Krishna Mohana Rao, Comparitive Study of Theoritical and Practical Surface Roughness Profiles Produced in Turning, Int J of engg and Tech, ISBN No.0976-3945, Vol No.3, Issue No.1, pp.89-99, IJAET, 2012

 G.Krishna Mohana Rao, G Ranga Janardhana, D Hanumantha Rao & M srinivasa Rao, Development of hybrid model and optimization of surface roughness in electric discharge machining using artificial neural networks and genetic algorithm, Journal of Materials Processing Technology, ISBN No.0924-0136, Vol No.209, pp.1512-1520, Elsevier, 2009

 P Prasanna, B subba Rao & G Krishna Mohana Rao, Experimental and Numerical Evaluation of Friction Stir Welds of AA6061-T6 Aluminium Alloy, ARPN Journal of Engineering and Applied Sciences, ISBN No.1819-6608, Vol No.5, Issue No.6, pp.1-17, ARPN, 2010

 G.Krishna Mohana Rao & D Hanumantha Rao , Hybrid Modelling and Optimization of Hardness of Surface Produced by electric discharge machining using artificial neural networks and genetic algorithm, ARPN Journal of Engineering and Applied Sciences, ISBN No.1819-6608, Vol No.5, Issue No.5, pp.73-82, ARPN, 2010

 P Prasanna, B subba Rao & G Krishna Mohana Rao, Finite Element Modeling for maximum temperature in friction stir welding and its validation, Int J Adv Manuf Technol, Vol No.51, pp.925-933, Springer Verilog, 2010

 M Venkata Ramana, K srinivasulu & G Krishna Mohana Rao, Performance evaluation and selection of optimal parameters in turning of Ti-6Al-4V alloy under different cooling conditions, Int J of Innov Tech & Creative eng, ISBN No.2045-8711, Vol No.1, Issue No.5, pp.10-21, 2011

 B. V. S. Rao, G. Chandra Mohan Reddy, G. Krishna Mohana Rao, P. Ranadheer & P. V. R. Ravindra Reddy, Optimization of Blank Holding force in deep drawing of cylindrical cups using taguchi approach, Int J of Engg and Innov Tech, ISBN No.2277-3754, Vol No.2, Issue No.3-4, pp.143-148, 2012

 B.Surekha, D Hanumantha Rao, G Krishna Mohana Rao, Pandu R Vundavalli & M B Parappagoudar, Modeling and analysis of resin bonded sand mould system using design of experiments and central composite design, J. Manuf. Sci. Prod., Vol No.12, pp.31-50, De Gruyter, 2012

 M Venkata Ramana, A Venkatavishnu, G Krishna Mohana Rao & D Hanumantha Rao, Experimental Investigations, Optimisation of process parameters and mathematical modeling in turning of titanium alloy under different lubricant conditions, IOSR J Of engg, ISBN No.2250-3021, Vol No.2, Issue No.1, pp.86-101, IOSR, 2012

 A Lakshminarayana, R Vijaya Kumar & G Krishna Mohana rao, Buckling Analysis of quasi-isotropic symmetrically laminated rectangular composite plates with an elliptical/circular cutout subjected to linearly varying in-plane loading using FEM, Int J of Mechanics, Vol No.6, Issue No.1, pp.1-8, 2012

 Ratnakar Pandu, P Ravinder Reddy, AVSSKS Guptha & G K M Rao, Simulation studies on Dynamic response of single-walled carbon nano tubes under bending-buckling loads- an FEA approach, Int J of Nanotechnology and Applications, ISBN No.0973-631, Vol No.3, Issue No.2, pp.49-60, Research India Publications, 2009

 Afroz Meher, P RavinderReddy, G K Mohana rao & Ratnakar Pandu, Theoritical modeling and analysis of orthotropic cylindrical shells of different composites subjected to different loading conditions, Int J of Materials Science, ISBN No.0973-4589, Vol No.5, Issue No.1, pp.91-104, Research India Publications, 2010

 M Srinivasa Rao, K V Sharma, A Seshu Kumar & G Krishna Mohana Rao, Buffer Stocks in Kanban controlled (Traditional) unsaturated multi-stage production system, Journal of Engg and Applied Science, ISBN No.1819-6608, Vol No.3, Issue No.6, pp.51-58, ARPN, 2008

 G.Krishna Mohana Rao, G Ranga Janardhana, D Hanumantha Rao & M srinivasa Rao, Development of hybrid model and optimization of Metal removal Rate in electric discharge machining using artificial neural networks and genetic algorithm, Journal of Engg and Applied Science, ISBN No.1819-6608, Vol No.3, Issue No.11, pp.19-30, ARPN, 2008

 Thahar Ali Syed, Ratnakar Pandu, Mohana Rao G K, Ravinder Reddy P & Eswara Prasad K, Design and Development of ZNO Nano tube based Photo- Electrodes for Dye-Sensitized Solar cells, Int J of Scientific and Research Publications, ISBN No.2250-3153, Vol No.2, Issue No.5, pp.1, 2012

 Taraknath De, S Sundarrajan & G Krishna Mohana Rao, Configuration design of spring loaded detachable canister launch vehicle interface for multistage long launch vehicle, Journal of engg, ISBN No.2250-3021, Vol No.2, Issue No.6, pp.1328-1333, IOSR, 2012

 B. Surekha, D. Hanumantha Rao, G. Krishna Mohana Rao, Pandu R. Vundavalli, M.B. Parappagoudar, Prediction of Resin Baonded Sand Core Properties Using Fuzzy Logic, Journal of Intelligent and Fuzzy Systems, Vol No.25, pp.595-604, IOS Press, 2013

 Srinivasulu P, G Krishna Mohana Rao, FRICTION STIR WELDING PROCESS A NOVEL JOINING TECHNIQUE, International Journal on Mechanical Engineering and Robotics

Bhiksha Gugulothu, D.Hanumantha Rao, G.Krishna Mohana Rao, Influence of parameters and dielectric fluids on electric discharge machining of Titanium Alloy, Journal of Material Science and Mechanical Engineering, ISBN No.2393-9095, Vol No.2, Issue No.5, pp.409-414, April, 2015

M Venkata Ramana, G Krishna Mohana Rao & D Hanumantha Rao, Experimental Investigations and Selection of optimal cutting conditions in turning of Ti-6Al-4V alloy with different cutting fluids by minimum quantity lubrication (MQL) methodology, J on Mechanical Engineering, Vol No.2, Issue No.1, pp.44-51, i-Manager, 2011

M.Venkataramana, G.Krishna Mohana Rao, D. Hanumantha Rao, Optimization of Process Parameters using Taguchi and Simulated Annealing Methods for Surface Roughness in Turning of Ti-6Al-4V alloy, i-Manager’s Journal on Mechanical Engineering, Vol No.4, Issue No.4, pp.29-37

Ishrat M Mirjana, G.Krishna Mohana Rao, S.Irfan Sadak, Kaushal Dasari, BEhavioural Study of a functionally graded material disc subjected to pressure conditions, Int Conf on Technological Innovations in Mechanical Engineering(TIME-2016), ISBN No.978-93-81692-07-1, pp.89-94, 2016

P.Ravi Kumar,Dr.G.Krishna Mohana Rao, D.Ajay, Optimization of Metal removal rate in Machining of cast iron and copper alloy by End Milling, International Conference on Technological Innovations in Mechanical Engineering (TIME-2016), ISBN No.978-93-81692-07-1, Chaitanya Bharathi Institute of Technology, Hyderabad, India, February, 2016

P.Ravi Kumar, Dr.G.Krishna Mohana Rao, Theoretical and Experimental analysis of End Milling Process with Multiple finger inserted cutters, 18th International Conference on Automotive and Mechanical Engineering, World academy of Science ,Engineering and Technology(WASET) at Tokyo, Japan, May, 2016

Vijaya Kumar.R, A.Lakshmi narayana ,Krishnamohana rao G, Stress Analysis For Strength Prediction Of Laminated Composite Plates With Rectangular/Square Cutout Using Finite Element Method, SAMPE Conference Proceedings. Long Beach, CA, May 23-26, 2016, Society for the Advancement of Material and Process Engineering, 2016

A.Lakshmi narayana ,Krishnamohana rao and Vijaya Kumar.R, Progressive Failure Analysis Of Laminated Composite Plates With Elliptical Or Circular Cutout Using Finite Element Method, International conference on advance materials and manufacturing applications, Bangalore, India, Vol No.149, Issue No.1, IOP Conference series:Materials Science and Engineering, 2016

B V S Rao, Dr. G Chandra Mohan Reddy, G Krishna Mohan Rao, P V R Ravindra Reddy, Numerical Analysis on the Effect of Friction Coefficient on Wrinkling in Deep Drawing with Linearly Variable Blank Holding Force, International Conference on Technological Innovations in Mechanical Engineering (TIME-2016), ISBN No.97-93-1692-07-1, Febreuary, 2016

B V S Rao, G Chandra Mohan Reddy, G Krishna Mohan Rao, and P V R Ravindra Reddy, Numerical Analysis on The effect of Various Parameters on Fracture Limit for Deep Drawn Cups, International Conference on Processing of Materials, Minerals and Energy, PMME 2016, Materials Today Proceedings, ScienceDirect, Elsevier, 2016

J. Anjaneyulu, G. Krishna Mohana Rao, G. Venkata Rao, Stress analysis of a circuit breaker switchgear mechanism by using multi body dynamics, 28th International Conference on CAD/CAM, Robotics and Factories of Future (28 CARS and FOF 2016), pp.183-193, Springer publications, College of Engineering and Management, Kolaghat, West Bengal, January, 2016

Bhiksha Gugulothu, D.Hanumantha Rao, G.Krishna Mohana Rao, Optimization of EDM Process Parameters and Graphite Powder Concentration on Electrical Discharge Machining of Ti-6Al-4V using Taguchi Method, 9th International Conference on Production, Mechanical and Automobile Engineering (ICPMAE- 2015), ISBN No.978-93-85225-43-7, pp.12-25, Technical Research Organization India (TROI), August, 2015

Afroz Meher, P.Ravinder Reddy, G.Krishna Mohana Rao, Experimental Investigation and FE analysis of Mechanical Properties of Carbon Fiber Reinforced Epoxy Composites, 4th International Conference on Materials Processing and Characterization, ICMPC2015, 2015

Rajendra.M, G. Krishna Mohana Rao, OPTIMIZATION OF PROCESS PARAMETERS OF EDM OF D3 DIE STEEL WITH BORON CARBIDE(B4C ) ABRASIVE PARTICLES MIXED DIE ELECTRIC FLUID BY GREY RELATIONAL TAGUCHI TECHNIQUE, International Conference at mallaredddy college of Engg.& Tech. Secundrabad, ISBN No.978-93-83038-28-2, pp.156-162, 2015

M.Venkataramana, G.Krishna Mohana Rao, D. Hanumantha Rao, Optimization and Effect of Process parameters on Tool wear in Turning Titanium Alloy under Different Machining Conditions, 1st International Congress on Computers, Electronics and Communication Engineering , ISBN No.10.7763/IPCSIT.2014.V59.16. , pp.87-93, March, 2014

M.Venkataramana, G.Krishna Mohana Rao, D. Hanumantha Rao, Selection of Optimum Process Parameters for Improving Material Removal Rate in Turning of Titanium Alloy under Different Machining Environments, International Conference on Emerging Technologies in Mechanical Sciences , pp.225-230, December, 2014

S R ChandraMouli, G.Krishna Mohana Rao, Design Aspects for Developing spatial kinematics of a flexible manipulator arm, International conference on Design, Analysis, Manufacturing and Simulation, pp.512-517, March, 2013

Padmini R, P Vamsi Krishna, G. Krishna Mohana Rao, RR Srikant, Experimental Evaluation of vegetable oil based nanofluids in turning of AISI1040 steel, AMPCO-2012, 2013

Padmini R, P Vamsi Krishna, G. Krishna Mohana Rao, RR Srikant, Vegetable oil based nano solid lubricants for sustainable manufacturing, International Conference on Industrial Engineering ICIE 2013, Nov ’20th to 22nd SVNIT, pp.21-25, 2013

J. Anjaneyulu, G. Krishna Mohana Rao, G. Venkata Rao, Analysis and vibration behaviour of a medium voltage spring operated switch gear mechanism used for circuit breaker, 1st International Conference on Machines and Mechanisms (iNacomm 2013), pp.972-979, Indian Institute of Technology, Roorkee, December, 2013

M.Venkata Ramana, G.Krishna Mohana Rao, D. Hanumantha Rao, Effect of Process parameters on Surface Roughness in Turning of Titanium Alloy under Different Conditions of Lubrication, Ist International Conference on Mechanical and Robotics Engineering, ISBN No.978-1-61804-185-2, pp.83-91, World Scientific and Engineering Academy and Society, May, 2013

M.Venkataramana, G.Krishna Mohana Rao, D. Hanumantha Rao, Effect of Process Parameters on Surface Roughness in Turning of Titanium Alloy under Different Conditions of Lubrication, 4th European International Conference on Recent advances in Mechanical Engineering Applications , ISBN No.978-960-474-345-2, pp.137-145, October, 2013

P.Ravi Kumar*,Dr.G.Krishna Mohana Rao, Dr.M.Ramalinga Reddy, D.Ajay , Tool wear in Milling process- A Review, International Conference on Materials Processing and Characterization (ICMPC2012), pp.203-207, Gokaraju Rangaraju Institute of Engineering and Technology, Hyderabad,India , March, 2012

M Venkata Ramana, G V Surekha, A Venkata VIshnu, G Krishna Mohana Rao & D hanumantha Rao, Optimization and effect of process prameters on tool wear in turning of titanium alloy under different lubricant conditions, Int Conf on Materials Processing and Characterization, Vol No.1, pp.154-167, March, 2012

B.Surekha, Pandu R Vundavalli, D Hanumantha Rao & G Krishna Mohana Rao, Experimental Investigation and Multiple Linear Regression of Chromite-Based Resin Bonded Sand System, Int. Conf. on Materials Processing and characterisation, pp.281-287, 2012

G.Krishna Mohana Rao, Ravi Kumar, P. & Sowmya, Surface roughness Optimization in end Milling Operation with damper Inserted end Milling Cutters, Int Conf on Aerospace, Mechanical, Automotive and Materials engg, Vol No.70, pp.884-889, World Academy of Science, engg and technology, 2012

G.Krishna Mohana Rao, Ravi Kumar, P. & Sowmya, Influence of cutting Speed and Type of Damping Insert on the Roughness of Surface Produced by Damper Inserted end Mill Cutter, Latest Trends in environmental and Manufacturing Engineering, ISBN No.978-1-61804-135-7, pp.27-32, WSEAS

G.Krishna Mohana Rao, Ravi Kumar, P., Surface Roughness Analysis in Milling, Vol No.59, pp.2939-2946, World Academy of Science, engg and technology, 2011

Ravi Kumar P, G Krishna Mohana Rao, M ramalinga Reddy & G Kavitha Reddy, A Review on energy Saving During Milling Process, Recent Advances and Challenges in Energy-2012, ISBN No.0974-5904, pp.46-50, Int J of Earth Sciences and Engineering, 2012

S R Chandramouli & G Krishna Mohana Rao, An pproach to develop Hyper Redundant Robot Arm Kinematics, 4th Int & 25th All India Manuf Tech, Design and research Conference (AIMTDR 2012), Vol No.2, pp.906-909, AIMTDR, 2012

J Anjaneyulu, G Venkata Rao & G Krishna Mohana Rao, Multibody Dynamic Analysis of Spring Operated Mechanism of SF-6 switch gear and its validation, ICAMB2012, pp.227-235, SMBS, Vellore University, India, 2012

M Venkata Ramana, A Venkatavishnu, G Krishna Mohana Rao & D Hanumantha Rao, Optimization of process parameters and experimental investigation for material removal rate in turning of titanium alloy under different cooling conditions, Int Conf on Futuristic Trends in Materials and Energy Systems, pp.120-132, VR Sidhartha Engg College , Vijayawada, India, 2011

M Venkata Ramana, G Krishna Mohana Rao & A swarnendra Goud, Experimental Investigations and optimization of process parameters in turning of 6351 Aluminium alloy with Dry, flooded and Minimum quantity lubrication (MQL) conditions on cutting forces and chip morphology, First Int Conf on Sunrise Technologies- i COST 2011, pp.375-382, 2011

B Sreenivasulu, M ramesh Kumar, M Jayalakshmi & G Krishna Mohana Rao, Experimental Investigation of optimal machining parameters in die sinking electro dischage machining of 15CDV6, Int Conf on Global Manufacturing and Innovation, pp.1-8, 2006

G Krishna Mohana Rao, S Satyanarayana & M Praveen, Influence of machining parameters on electric discharge machining of maraging steels- An experimental investigation, World Congress on Engineering, ISBN No.978-988-17012-3-7, Vol No.2, Int Assoc of engineers, 2008

Jayalakshmi R, G Krishna Mohana Rao, M ramesh Kumar, B srinivasulu & G Ranga Janardhana, Experimental Investigation of Optimal Machining Parameters of Wire-Cut EDM on Titanium Alloy(T31), Int Conf on Manuf Sci and Tech, pp.185-188, Melaka University, Malaysia, 2006

Eswara Prasad Koorapati, Sriram Venkatesh, G Krishna Mohana Rao & R Murali Krishna , Three Dimensional Contact Analysis of the Burnishing Process- A Finite Element Approach, ICETAETS2008, pp.589-595, 2008

G KRishna Mohana Rao, Subba Rao & P Prasanna, Development of Mathematical Model for Friction Stir Welding of 304L stainless steel, 2nd IEEE Int Conf on Computer Science and Information Technology(ICCSIT2009), pp.221, IACSIT, 2009

G Krishna Mohana Rao, To, Int Symposium on Adv Materials and Processing, Basweswar Engg College , Bagalkot, Karnataka, India, 2007

G Krishna Mohana Rao, Experimental Investigation of Optimal Machining Parameters on Die Sinking EDM for Titanium Alloy(Ti-6Al-4V), 4th Assuit Univ Int Conf on Mech Engg Adv Tech for Industrial Production, Assuit University , Egypt, 2006

M Ramesh Kumar, R Jayalakshmi, B Sreenivasulu & G Krishna Mohana Rao, Experimental Investigation of Optimal Machining Parameters on Die Sinking Electro Dischage Machining of AluminiumAlloy(HE15), AMPC2006, 2006

G.Krishna Mohana Rao, Experimental Analysis of Passive Damping Technique on Conventional Radial Drilling Machine Tool Bed Using Composite Materials, 2nd International Conference on Mechanical and Materials Engineering, ISBN No.978-93-82242-27-7, pp.93-96, International scientific Academy of Engineering and Technology, 2013

Mojtaba Gholamian, G.Krishna Mohana Rao, Panitapu Bhramara, Effect of Inlet on Efficiency and Flow Pattern in Centrifugal Fan using CFD Analysis and Experimental Validation, Ist International COnference on Mechanical and Robotics Engineering, ISBN No.978-1-61804-185-2, pp.37-44, World Scientific and Engineering Academy and Society, 2013

P.Ravi Kumar, G.Krishna Mohana Rao, K.C. Sudha Rani, Non Linear Static and Dynamic Analysis of End Milling Cutter with Multiple Fingers, Ist International COnference on Mechanical and Robotics Engineering, ISBN No.978-1-61804-185-2, pp.73-82, World Scientific and Engineering Academy and Society, 2013

A.Lakshminarayana, G.Krishna Mohana Rao, R.Vijaya Kumar, Effect of Plate Aspect Ratio on BUckling strength of Rectangular Composite Plate with Square/Rectangular Cutout Subjected to Various Linearly Varying In-Plane Loading Using FEM, 1st International Conference on Mechanical and Robotics Engineering, ISBN No.978-1-61804-185-2, pp.92-99, World Scientific and Engineering Academy and Society, 2013

G.Krishna Mohana Rao. Padmini R, Vamsi Krishna P, Performance Evaluation of Eco-Friendly Nanofluids in Machining, Ist International COnference on Mechanical and Robotics Engineering, ISBN No.978-1-61804-185-2, pp.221-229, World Scientific and Engineering Academy and Society, 2013

Surekha Benguluri, Hanumantha Rao Dharwada, Krishna Mohana Rao Gurram, Pandu Ranga Vundavalli, Experimental Studies on Properties of Chromite based Resin Bonded Sand System, Ist International COnference on Mechanical and Robotics Engineering, ISBN No.978-1-61804-185-2, pp.230-238, World Scientific and Engineering Academy and Society, 2013

J.Anjaneyulu, G. Krishna Mohana Rao, G. Venkata Rao, S. Sreekanth, Stress analysis of high speed mechanism of a 69 KV-SF6 switch gear, 5th National Conference on Advances In Mechanical Engineering (AIM-2015), pp.41-45, Vasavi College of Engineering, Hyderabad, May, 2015

S R ChandraMouli, G.Krishna Mohana Rao, Investigation and Simulation of 2R and 3R Robot Manpulator Kinematics and Trajectory Planning, IEEE National Conference on Recent Advances in Mechanical Engineering(RAME-2014), pp.171-183, Saveetha University, Chennai, Febreury, 2014

Rajendra.M, G. Krishna Mohana Rao, ANALYSIS OF THE INLUENCE OF THE Al2O3 ABRASIVE PARTICLES IN THE DIE ELECTRIC FLUID ON THE PERFORMANCE OF DIE SINKING EDM BY GREY RELATIONAL TAGUCHI TECHNIQUE, National Conference at QIS college of Engg.& Tech. Ongole(AP), pp.6-12, 2014

P. Ravi Kumar, Dr.G.Krishna Mohana Rao, D.Ajay ,M.Sarat Chandra, Experimental evaluation of Tool wear in Milling, 4th National Conference on Advances in Mechanical Engineering (AIM 2013), ISBN No.978-93-82570-16-5, Vasavi College of Engineering, Ibrahimbagh, Hyderabad, A.P., India , November, 2013

P.Ravi Kumar*, Dr.G.Krishna Mohana Rao, D.Ajay, Surface finish comparison for different metals in milling, National Conference on role of civil and mechanical engineer in the development of society (RCMS 2K13) , pp.62-67, Malla Reddy Engineering College, Maisammaguda, Secunderabad, A.P, September, 2013

J.Anjaneyulu, G. Krishna Mohana Rao, G. Venkata Rao, T.R.Rao, M. Prudvi Pande, Analysis of scaled down model of switch gear mechanism, 4th National Conference on Advances In Mechanical Engineering (AIM-2013), pp.80-85, Vasavi College of Engineering, Hyderabad, November, 2013

J. Anjaneyulu, G. Krishna Mohana Rao, G. Venkata Rao,A.Srinivas, The RRR-robot manipulator end effecter path control by considering their links’ flexibility, National Conference on Advances In Mechanical Engineering (AIM-2012), pp.150-154, Vasavi College of Engineering, Hyderabad, October, 2012

J. Anjaneyulu, G. Krishna Mohana Rao, G. Venkata Rao, Dynamic modeling of flexible-link flexible-joint manipulators, National Conference on Advances In Mechanical Engineering (AIME-2012), pp.123-126, KITS College of Engineering, Huzrabad, 2012

P.Ravi Kumar, G.Krishna Mohana Rao, M Ramalinga Reddy & G Kavitha Reddy, A Review on Tool Breakage detection system in Milling Process, National Conf on Advances in Mech Engg, ISBN No.978-81-906270-9-2, pp.146, Sona College of Technology ,Salem,Tamilnadu , August, 2011

P.Ravi Kumar, G.Krishna Mohana Rao, M Ramalinga Reddy & G Kavitha Reddy, A Review on surface roughness in milling process, National Conf on Latest trends in Mech Engg, pp.127-134, Vignan Institute Of Technology and sciences, Hyderabad , August, 2011

P.Srinivasulu, Dr. G. Krishnamohana Rao, PVV Raja Rao & S.Srinivasa Rao , A Review on micro Structure of friction stir welded Titanium alloys, National Conference On INNOVATIONS IN MECHANICAL ENGINEERING, IME’ , pp.363-366, J.T. MahaJan College of Engineering, Faizpur, January, 2010

P.Ravi Kumar*, Dr.G.Krishna Mohana Rao,Dr.N.N.Ramesh, Modelling and chatter control in Milling, National Conference On State of the Art of The Technologies in Mechanical Engineering (NCSAME-2009) , August, 2009

M Venkata Ramana, G Krishna Mohana Rao & D Hanumantha Rao, Machinability of Titanium Alloys- A Review, National Conference on the state of the art of technologies in mechanical engineering, August, 2009

Mr. B V S Rao, Dr. G. Chandra Mohan Reddy, Dr. G. Krishna Mohan Rao, Experimental Investigation on Deep Drawing Operation by using Fem Approach, AVC College of Engineering, Mannampandal, Maylladuthurai (TN)

P.Ravi Kumar, G.Krishna Mohana Rao, M Ramalinga Reddy & G Kavitha Reddy, A Review on energy Saving During Milling Process

P.Ravi Kumar, G.Krishna Mohana Rao, Modelling and Chatter control in Milling: A Review, Nat Conf on State of the Art of Technologies in Mechanical Engineering(NCSAME2009), JNTU Hyderabad, 2009

J Anjaneyulu, G Venkata Rao & G Krishna Mohana Rao, Free Vibration Analysis of a planar four bar flexible mechanism, Nat conf on Advances in Mechanical engineering(AIM2010), pp.65-76, Vasavi College of Engg, 2010

P srinivasulu, G Krishna Mohana Rao, S Srinivasa Rao & PVV raja Rao, Friction Stir Welding Process- A Novel Joining Technique, Nat conf on Recent Advances in Mech Engg(RAIME'10), National engg College , Kovilpatti, TN, India, 2010

K Eswara Prasad, G Krishna Mohana rao & M chittibabu, The effect of Process parameters on surface roughness using electric discharge machining, Nat Conf on Trends in Mech Engg:Time2003, pp.269-271, NIT,Warangal,India, 2003

G Krishna Mohana Rao, Genetic Algorithm-An Overview

M T Naik & G Krishna Mohana rao, Effect of Welding and Heat Treatment on Cast Iron, pp.93-97

G Krishna Mohana Rao & KSS Murthy, Effect of Heat Input and Percentage of CO2 in Sheilding gas on the Strength aspects of flux cored arc weld metal, pp.270-272

G Krishna Mohana Rao & KSS Murthy, Studies on the Influence of Various Factors on The Mechanical Properties of flux cored arc weldment, Seventeenth Nat Conv of Mech engg and All India Seminar on Future Trends in Mech Engg, Research and Devolopment, University of Roorkee, 2000

K Eswara Prasad, P ravinder, M manzoor Hussain, G Krishna Mohana Rao, M Indiara rani, Neural Network Methods for optimizing the Burnishing Process Parameters using Genetic Algorithm, Nat Conf on State of the Art of Technologies in Mechanical Engineering(NCSAME2009), pp.276-279, JNTU Hyderabad, 2004

B Sreenivasulu &G Krishna Mohana Rao, Experimental Investigation of Optimal Machining Parameters in die Sinking Electro Dischage Machining of Miraging Steels(M250), Nat Conf n Adv in Mech Engg, pp.1-6, Engg College Kota, Kota, India, 2006

B Karuna Kumar, G rajasekhar & G Krishna Mohana rao, The Fuzzy front end- An area of extrordinary oppurtunity, National seminar& Academia-Industry Interface, pp.1-14, MM Educational Trust, Ambala, Haryana

B Karuna Kumar, G rajasekhar & G Krishna Mohana rao, Dry Machining, National seminar& Academia-Industry Interface, pp.1-8, MM Educational Trust, Ambala, Haryana