Department of Mechanical Engineering

Faculty Details Back
   
Click here to view Profile   PDF Profile
Photo
Dr. A. Chennakesava Reddy
B.E(BU); L.L.B(OU); M.E(BU); M.Tech(JNTUH); Ph.D(OU)., Ph.D(JNTUH)., C.Engg.
Senior Professor
M.ISTE., M.IIF.,M.IIW., M.IE., M.IIPE.,M.ISME.
Mechanical Engineering

Dr. A. Chennakesava Reddy has obtained (1) B.E Degree in Mechanical Engineering in the year 1990; (2) M.E (Mechanical Engineering) in the year 1993 from Bangalore University and (3) Ph.D on Investment Casting Process from Flyash from Osmania University, Hyderabad in the year 2000. He did a second post graduate (4) M.Tech (CAD/CAM) from JNT University, Hyderabad in the year 2002 and he has acquired a second (5) Ph.D in the field of CAD/CAM from JNT University, Hyderabad in the year 2006. He also did (6) LLB in the year 2023 from Osmania University, Hyderabad. He is also proficient in the use of Engineering Software (CAD, FEA, CFD, and CAM).

Dr. A. Chennakesava Reddy began his career in the year 1994 as Assistant Professor in Arunai Engineering College – Thiruvannamalai. He joined MJCET, Hyderabad as Assistant Professor in Mechanical Engineering in the same year 1994 and therein became Associate professor in the year 2000. In the year 2001, he moved as Associate Professor to Vasavi College of Engineering, Hyderabad. He was selected as Associate Professor at JNTU, Hyderabad in the year 2003 and he became Professor of Mechanical Engineering, JNTUH in the year 2006 and Senior Professor in the year 2016.

He has completed several R&D and Consultancy Projects sponsored by AICTE, UGC, DRDO and State Government worth 300 Lakhs. He has guided 75 M.Tech projects successfully and guided 25 research scholars for their Ph.D. He is member of Professional Societies; viz., Indian Institute of Technical Education, Institution of Engineers (India), Institute of Indian Foundrymen, Indian Institute of Welding, Indian Institution of Production Engineers, and Indian Society for Manufacturing Engineers.

He has published 591 technical papers in various Journals and Conferences at National and International level. He is the Editorial Member for Journal of Manufacturing Engineering.He is the author of textbooks on (1) Finite Element Methods, (2) CAD/CAM and (3) Computer Graphics published by Prentice Hall of India; (4) Fuzzy Logic & Neural Networks published by New Age International; (5) Instrumentation and Controls published by Cengage Learning (both India and Singapore Editions).  

He is the recipient of “Best Paper” awards eleven times. He is also the recipient of "Best Teacher" award in the year 2014 from the Government of Telangana State, India . He is in the "Top 10 Scholars''with h-index of 46 in the research areas of CAE, CAD/CAM, Manufacturing Technology, Metal Matrix Composites and Characterization of Materials across the world as per Google Scholar Citations.

He has organized a number of workshops, seminars, conferences and short term training programs for the benefit of the fellow teachers and the engineering professionals and unemployed rural youth. He is the resource person for a number of seminars and short term training programs organized by various Institutes.

He has served in administration in the capacities of (1) Nodal Officer (Examinations); (2) HOD of Mechanical Engineering, JNTUH CEJ; (3) Vice-Principal, JNTUH CEJ; (4) HOD of Mechanical Engineering, JNTUH CEH; (5) Chairman for Board of Studies in Manufacturing Engineering, JNT University Hyderabad; and (6) Director for Foreign Relations, JNT University Hyderabad.

He is (1) the Member, Board of Studies in the Mechanical Engineering; (2) the Governing Body Member for several Affiliated Engineering Colleges in the State of Telangana and Deemed to be Universities in the State of Karnataka. He is also Academic Senate Member for several Autonomous Engineering Colleges in the state of Telangana. He has acted as the Member for Standing Hearing Committee (SHC) and Standing Appleate Commitee (SAC) appointed by AICTE New Delhi for the purpose of, santion of New Institutes and closure of Old Institutes.
 
bbullet Publications

A. Journals

1. A. Chennakesava Reddy, K.M. Babu, P.M. Jebaraj and M.P. Chowdaiah, Accelerator for faster investment shell making and its effect on the properties of investment moulds, Indian Foundry Journal, Vol.41, No.10, pp.3-8, 1995. 

2. A. Chennakesava Reddy, Y.J. Rao, Bio-gas from an industrial waste, Energy for Sustainable Development, The Journal of International Energy Initiative, Vol.03, No. 01, pp. 40-42,1996.

3. A. Chennakesava Reddy, H.B. Niranjan and A.R.V. Murti, Optimization of investment shell mould using colloidal silica binder, Indian Journal of Engineering & Materials, Vol.03, No.05, pp.180-184, 1996.

4. A. Chennakesava Reddy, Measuring surface roughness – A simple method, Journal of Engineering Advances, Vol.8, No.10, pp.74-75, 1996.

5. A. Chennakesava Reddy, A method to evaluate surface roughness of as-castings, Indian Foundry Journal, Vol.42, No.12, pp.28-30, 1996.

6. A. Chennakesava Reddy, Coal flyash – environmental impact and utilization: A review, Journal of Engineering Advances, Vol.9, No.2, pp.48-49, 1997.

7. A. Chennakesava Reddy, V.S.R.Murti and S. Sundararajan, Regression modeling approach for the analysis of investment shell moulds from coal-flyash, Foundry Journal, Vol.9, No.5, pp.36-40, 1997.

8. A. Chennakesava Reddy, Advances in manufacturing of piston rings, Journal of Engineering Advances, Vol.9, No.11, pp.62-66, 1997.

9. A. Chennakesava Reddy, Vacuum suction core making process, Journal of Institution of Engineers, Vol. 79, No.1, pp.37-38, 1998.

10. A. Chennakesava Reddy and V.M. Shamraj, Reduction of cracks in the cylinder liners choosing right process variables by Taguchi method, Foundry Journal, Vol.10, No.4, pp.47-50, 1998.

11. A. Chennakesava Reddy, V.S.R. Murti, S. Sundararajan, Some aspects of reducing sediments rate of refractory fillers in the investment casting process, Journal of Engineering Advances, Vol.10, No.8, pp.61-63, 1998.

12. A. Chennakesava Reddy and P. Ramesh Kumar, Analysis of core characteristics in VACM process using response surface methodology, Indian Foundry Journal, Vol.44, No.9, pp.142-147, 1998.

13. A. Chennakesava Reddy, V.S.R. Murti and S. Sundararajan, Control factor design of investment shell mould from coal flyash by Taguchi method, Indian Foundry Journal, Vol.45, No.04, 93-98, 1999.

14. A. Chennakesava Reddy, Residual stress measurement of reverse flow formed components by X-ray diffractometer, Journal of Engineering Advances, Vol.11, No.9, pp.54-55, 1999.

15. A. Chennakesava Reddy, V.S.R.Murti and P.M.Jebaraj, A new technique for measurement of the strength of ceramic shells in the precision casting process, Journal of Testing and Evaluation, Vol. 28, No.3, pp. 224-226, 2000.

16. A. Chennakesava Reddy, Reuse of coal- flyash in foundry, Journal of Technology Trends, Vol.2, No.1, pp.35-36, 2001.

17. A. Chennakesava Reddy, V.S.R. Murti and S. Sundararajan, Bonding mechanism in the coal-flyash ceramic shells, Indian Foundry Journal, Vol.47, No.4, pp.21-25, 2001.

18. A. Chennakesava Reddy, Robot and its engineering field applications, Journal of Engineering Advances, Vol.14, No.1, pp.33-35, 2002.

19. A. Chennakesava Reddy, K. Siva Reddy and Ch. Rajanna, The effects of process variables on the dimensional variation of intermediate spacer castings used in the cement mills – A case study, Indian Foundry Journal, Vol.48, No.3, pp.21-24, 2002.

20. A. Chennakesava Reddy, Computational fluid dynamics analysis of flow over a sine wave shaped wall, Journal of Pumps-N-Valves, Vol.2, No.2, pp.46-47, 2002.

21. A. Chennakesava Reddy, Studies on fracture behavior of brittle matrix and alumina trihydrate particulate composites, Indian Journal of Engineering & Materials Sciences, Vol.9, No.5, pp.365-368, 2003.

22. A. Chennakesava Reddy, Fluidity and microstructural features of Al-alloy weld beads, Journal of Engineering Advances, Vol.15, No.3, pp.28-32, 2003.

23. A. Chennakesava Reddy, B. Kotiveerachari and P. Ram Reddy, Dynamic trajectory planning of robot arms, Journal of Manufacturing Technology, Vol.3, No.3, pp.15-18, 2004.

24. A. Chennakesava Reddy, B. Kotiveerachari and P. Ram Reddy, The finite element analysis of flexibility in mobile robotic manipulators, Journal of Institution of Engineers, Vol.85, No.2, pp.27-31, 2004.

25. A. Chennakesava Reddy and S. Sundararajan, Influences of ageing, inclusions and voids on the ductile fracture mechanism of commercial Al-alloys, Journal of Bulletin of Material Sciences, Vol.28, No.1, pp.75-79, 2005.

26. A. Chennakesava Reddy V.S.R. Murti and S. Sundararajan, Characterization of dip-coating slurries from coal-flyash for investment vesting process, Journal of Foundry, Vol. 18, No.4, pp.51-54, 2006.

27. A. Chennakesava Reddy, Evaluation of resonant conditions causing high cycle fatigue in bladed disk assemblies of turbomachines using modal analysis, Journal of Manufacturing Technology, Vol.5, No.8, pp.5-10, 2006.

28. A. Chennakesava Reddy, Finite element analysis of reverse superplastic blow forming of Ti-Al-4V alloy for optimized control of thickness variation using ABAQUS, Journal of Manufacturing Engineering, Vol.1, No.1, pp.6-9, 2006.

29. Ch. Rajanna and A. Chennakesava Reddy, Solidification behaviour of Al-Si-Mg alloys in the gravity die-casting process, Indian Foundry Journal, Vol.53, No.10, pp.29-36, 2007.

30. J.J.V. Jeyasingh, G. Kothandaraman, P.P.Sinha, B. Nageswara Rao and A. Chennakesava Reddy, Spherical dome formation by transformation of superplasticity of titanium alloys and titanium matrix composites, International Journal of Materials Science & Engineering A, No.478, pp. 397-401, 2008.

31. J.V.Jeysingh, B. Nageswara Rao and A. Chennakesava Reddy, Investigation on failures of hydroforming deep drawing processes, Materials Science Research Journal, Vol.2, No.3 & 4, pp.145-168, 2008.

32. J.V.Jeysingh, B. Nageswara Rao and A. Chennakesava Reddy, Development of a ductile fracture criterion in cold forming, Materials Science Research Journal, Vol. 2, No.3&4, pp.191-206, 2008.

33. J.V.Jeysingh, B. Nageswara Rao and A. Chennakesava Reddy, Gas pressure forming of spherical domes from Pb-Sn eutectic alloy superplastic sheet material, Materials Science Research Journal, Vol.2, No. 3&4, pp.241-258, 2008.

34. A. Chennakesava Reddy, Different methods of robotic motion planning for assigning and training paralysed person, Journal of Institution of Engineers, Vol.88, No.2, pp.37-41, 2008.

35. V. Mahesh, A. Chennakesava Reddy and C.S.P.Rao, Powers of two-based heuristic for job-shop scheduling, ICFAI Journal of Operations and Management, Vol.7, No.1, pp.16-31, 2008.

36. V. Mahesh, Sandeep Dulluri, A. Chennakesava Reddy and C.S.P.Rao, Scheduling with processing alternatives: An approach to minimize makesman in a mulit-product manufacturing industry, ICFAI Journal of Operations and Management, Vol.7, No.4, pp.31-44, 2008.

37. A. Chennakesava Reddy and Ch. Rajanna, Design of gravity die casting process parameters of Al-Si-Mg alloys, Journal of Machining and Forming Technologies, Vol.1, No.1&2, pp.1-21, 2009.

38. V. Mahesh, Sandeep Dullari, A. Chennakesava Reddy and C.S.P. Rao, The impact of powers of two based schedule on the minimization of inventory costs in a multi product manufacturing environment, International Journal of Applied management and Technology, Vol.6, No.4, pp. 29-47, 2009.

39. A. Chennakesava Reddy, Mechanical properties and fracture behavior of 6061/SICp Metal Matrix Composites Fabricated by Low Pressure Die Casting Process, Journal of Manufacturing Technology Research, Vol.1, No.3&4, pp.273-286, 2009.

40. D.V. Srikanth, K.K. Chaturvedi and A.C. Reddy, Modelling of Large Tilting Pad Thrust Bearing Stiffness and Damping Coefficients, Tribology in Industry, Vol.31, No.3&4, pp.23-28, 2009.

41. A. Chennakesava Reddy and Essa Zitoun, Matrix al-alloys for alumina particle reinforced metal matrix composites, Indian Foundry Journal, Vol.55, No.1, pp.12-16, 2009.

42. S. Madahava Reddy and A. Chennakesava Reddy, Evaluation of process variables on cutting forces and heat generation in high-speed end milling of Al-Si-Mg-Fe alloys, Journal of Manufacturing Technology, Vol.8, No.6, pp.21-29, 2009.

43. P.S. Ranjit and A. Chennakesava Reddy, Studies on deformation and failure behavior of Ti-6AL-4V alloy for aircraft structures, ICFAI Journal of Mechanical Engineering, Vol.2, No.3, pp.58-70, 2009.

44. D.V. Srikanth, K.K. Chaturvedi, A.C. Reddy, Theoretical Predictions and Comparison of Oil Film Thickness, Pressure and Dynamic Characteristics of a  Tilting Pad Thrust Bearing in Large Vertical Machines, Indian Journal of Tribology, Vol.4, No.2, pp.30-37, 2009.

45. Niranjan Murthy, V. Krishnan and A. Chennakesava Reddy, Experimental Investigation of Heat transfer Enhancement using Impingement of Multiple Water Jets, Heat Transfer - Asian research, Vol.39, No.4, pp. 222-230, 2009.

46. D.V. Srikanth, K.K. Chaturvedi and A. Chennakesava Reddy, Predictions of Performance Characteristics in a  large Tilting Pad Thrust Bearing, Journal of Tribology and Surface Engineering, Vol.1, No.1&2, pp.21-38, 2010.

47. S. Pitchi Reddy, B. Ramana and A. Chennakesava Reddy, Compacting Characteristics of Aluminum–10wt% Fly Ash–Lead Metal Matrix Composites, International Journal of Materials Science, Vol.5, No.6, pp.777-783, 2010.

48. A. Chennakesava Reddy and B. Kotiveerachari, Effect of aging condition on structure and the properties of Al-alloy / SiC composite, International Journal of Engineering and Technology, Vol.2, No.6, pp.462-465, 2010.

49. A. Chennakesava Reddy, Tensile properties and fracture behavior of 6063/SiCP metal matrix composites fabricated by investment casting process, International Journal of Mechanical Engineering and Materials Sciences, Vol.3, No.1, pp.73-78, 2010.

50. A. Chennakesava Reddy and M. Vidya Sagar, Two-dimensional theoretical modeling of anisotropic wear in carbon/epoxy FRP composites: comparison with experimental data, International Journal of Theoretical and Applied Mechanics, Vol.6, No.1, pp.47-57, 2010.

51. A. Chennakesava Reddy, Fluidity and weld bead characteristics of Al-Si-Cu alloy prepared by MIG welding, International Journal of Manufacturing Science and Engineering, Vol.1, No.2, pp.55-59, 2010.

52. Niranjan Murthy, V. Krishnan and A. Chennakesava Reddy, Parametric study of Heat transfer Enhancement using Impingement of Multiple Water Jets, International Journal of Applied Engineering Research, Vol.5, No.2, pp.3553-3564, 2010.

53. Niranjan Murthy, V. Krishnan and A. Chennakesava Reddy, Parametric study of Heat transfer Enhancement using Impingement of Multiple air Jets, Vol.1, No.2, pp.31-37, 2010.

54. A. Chennakesava Reddy and S. Madahava Reddy, Evaluation of wear characteristics and consequences of cast Al-Si-Mg-Fe alloys, ICFAI Journal of Mechanical Engineering, Vol.03, No.1, pp.1-13, 2009.

55. A. Chennakesava Reddy and Essa Zitoun, Tensile behavior 0f 6063/Al2o3 particulate metal matrix composites fabricated by investment casting process, International Journal of Applied Engineering Research, Vol.1, No.3, pp.542-552, 2010.

56. S. Pitchi Reddy, B. Ramana and A. Chennakesava Reddy, Compacting Characteristics of Al-15%Pb – Flyash Metal Matrix Composites, Journal of Manufacturing Engineering, Vol.5, No.1, pp.55-59, 2010.

57. J.N. Malleswara Rao, A. Chennakesava Reddy and P.V. Rama Rao, Design and fabrication of new type dynamometer to measure radial component of cutting force and experimental investigation of optimum force in roller burnishing process, Indian Journal of Science and Technology, Vol.3, No.7, pp.737-742, 2010.

58. A. Chennakesava Reddy and Essa Zitoun, Matrix al-alloys for silicon carbide particle reinforced metal matrix composites, Indian journal of Science and Technology, Vol.3, No.12, pp.1184-1187, 2010.

59. A. Chennakesava Reddy, Optimization of Extrusion Process of Alloy 6063 Using Taguchi Technique, International Journal of Multi- Disciplinary Research & Advances in Engineering, Vol.3, No.2, pp.173-190, 2011.

60. A. Chennakesava Reddy, Effects of holding temperature and time for austempering on impact toughness of medium carbon and high alloy steel, International Journal of Technology and Engineering System, Vol.3, No.1, pp.8-11, 2011.

61. A. Chennakesava Reddy and Essa Zitoun, Tensile properties and fracture behavior of 6061/Al2O3 metal matrix composites fabricated by low pressure die casting process, International Journal of Materials Sciences, Vol.6, No.2, pp.147-157, 2011.

62. A. Chennakesava Reddy, Influence of strain rate and temperature on superplastic behavior of sinter forged Al6061/SiC metal matrix composites, International Journal of Engineering Research & Technology, Vol.4, No.2, pp.189-198, 2011.

63. Niranjan Murthy, V. Krishnan and A. Chennakesava Reddy, An experimental investigation of multiple water and air jet impingement cooling, International Journal of Applied Engineering Research, Vol.6, No.5, pp.661-672, 2011.

64. A. Chennakesava Reddy, Effects of austenizing on the fracture mechanism of hardened high carbon steel, International Journal of Materials Engineering and Technology, Vol.5, No.1, pp.21-27, 2011.

65. D. Aradhana, K. Karibasappa, A. Chennakesava Reddy, Human face recognition by cognitive model using fuzzy clustering technique, International journal of computer science and network security, Vol.11, No.5, pp.217-223, 2011.

66. D. Aradhana, K. Karibasappa, A. Chennakesava Reddy, Identification and removal of impulsive noise from corrupted images using hypergraph model, British Journal of Mathematics & Computer Science, Vol.1, No.2, pp.112-120, 2011

67. A. Chennakesava Reddy, Analysis of welding distortion in seam and skip arc weldings using finite element method, International Journal of Mechanical Engineering Research & Development, ISSN: 2248-9355, Vol.1, No.1, pp.12-18, 2011.

68. D. Aradhana, K. Karibasappa and A. Chennakesava Reddy, Face recognition by bunch graph method using a group based adaptive tolerant neural network, British Journal of Mathematics & Computer Science, Vol.1, No.4, pp. 194-203, 2011.

69. A. Chennakesava Reddy, Strengthening mechanisms and fracture behavior of 7072Al/Al2O3 metal matrix composites, International Journal of Engineering Science and Technology, Vol.3, No.7, pp.6090-6100, 2011.

70. S. Pitchi Reddy, B.Ramana and A. Chennakesava Reddy, Determination green hardness and strength al-15% Pb-fly ash metal matrix composites, International Journal of Emerging Technologies and Applications in Engineering Technology and Sciences, Vol.4, No.2, pp.11-14, 2011.

71. A. Chennakesava Reddy, Evaluation of mechanical behavior of Al-alloy/Al2O3 metal matrix composites with respect to their constituents using Taguchi, International Journal of Emerging Technologies and Applications in Engineering Technology and Sciences, Vol.4, No.2, pp. 26-30, 2011.

72. J.N. Malleswara Rao, A. Chennakesava Reddy and P.V. Rama Rao, Study of roller burnishing process on aluminum work pieces using design of experiments, International Journal of Mechanical Engineering & Technology, Vol.2, No.1, pp. 22-35, 2011.

73. J.N. Malleswara Rao, A. Chennakesava Reddy and P.V. Rama Rao, The effect of roller burnishing on surface hardness and surface roughness on mild steel specimens, International Journal of Applied Engineering Research, Vol.1, No.4, pp. 777-785, 2011.

74. J.N. Malleswara Rao, A. Chennakesava Reddy and P.V. Rama Rao, Evaluation of optimum values of surface roughness on aluminum work piece using roller burnishing, International Journal of Engineering Research & Technology, Vol.4, No.3, pp. 293-303, 2011.

75. J.N. Malleswara Rao, A. Chennakesava Reddy, P.V. Rama Rao and B. Mayuri, Finite element approach for the prediction of residual stresses in aluminum work pieces produced by roller burnishing, International Journal of Design and Manufacturing Technology, Vol.2, No.1, pp. 7-20, 2011.

 

76. Sandeep Patil, U.M. Choudhari and A. Chennakesava Reddy, Computer integrated Injection mould split design-reverse engineering approach, International Journal of Applied Engineering Research, Vol.6, No.13, pp.1661-1672, 2011

77. A. Chennakesava Reddy and G. Satish Babu, Dynamic mechanisms of kneecap, compliant ankle and passive swing leg to simulate human walking robot, International Journal of Advanced Mechatronics and Robotics, Vol. 3, No.1, pp.1-7, 2011.

78. S. Madhava Reddy and A. Chennakesava Reddy, Evaluation of process parameters on surface roughness and residual stresses in high-speed end milling of Al-Si-Mg-Fe alloy, International Journal of Advances in Machining and Forming Operations, Vol.3, No.1, pp.57-70, 2011.

79. A. Chennakesava Reddy, Effects of Rapid Preheating and Solution Heat Treatment on Mechanical Properties of AA2618 forged samples, International Journal of Applied Research in Mechanical Engineering, Vol.1, No.2, pp. 1-4, 2011.

80. A. Chennakesava Reddy, Tensile fracture behavior of 7072/SiCp metal matrix composites fabricated by gravity die casting process, Materials Technology: Advanced Performance Materials, Vol.26, No.5, pp.257-262, 2011.

81. A. Chennakesava Reddy , Evaluation of mechanical behavior of Al-alloy/SiC metal matrix composites with respect to their constituents using Taguchi techniques, i-manager’s Journal of Mechanical Engineering, Vol.1, No.2, pp.31-41, 2011.

82. J.N. Malleswara Rao, A. Chennakesava Reddy and P.V. Rama Rao, Experimental investigation of the influence of burnishing tool passes on surface and hardness of brass specimens, Indian journal of Science & Technology, Vol.4, No.9, pp. 1113-1118, 2011.

83. A. Chennakesava Reddy and B. Kotiveerachari, Influence of microstructural changes caused by ageing on wear behaviour of Al6061/SiC composites, Journal of Metallurgy & Materials Science, Vol. 53, No.1, pp.31-39, 2011.

84. A. Chennakesava Reddy, Effects of filler wire and current on the joining characteristics of Al – Li – Cu alloy using TIG welding, Indian Journal of Engineering, Science, & Technology, Vol.5, No.1, pp.13-15, 2011.

85. D.V. Srikanth, K.K. Chaturvedi and A. Chennakesava Reddy, Variation of tilting stiffness with pad deformation in a large thrust bearing, Journal of Tribology Research, Vol.2, No.1, pp.21-38, 2011.

86. A. Chennakesava Reddy, Studies on the effects of oxidation and its repression in MAG welding process, International Journal of Advanced Research in Engineering and Technology, Vol.3, No.1, pp. 48-54, 2012.

87. A. Chennakesava Reddy, T. Kishen Kumar Reddy and M. Vidya Sagar, Experimental characterization of warm deep drawing process for EDD steel, International Journal of Multidisciplinary Research & Advances in Engineering, Vol.4, No.3, pp.53-62, 2012.

88. S. Pitchi Reddy, B.Ramana and A. Chennakesava Reddy, Sintered Density and Porosity of Al-15wt% Pb/Fly-ash Metal Matrix Composites, International Journal of Engineering and Materials Sciences, Vol.5, No.1, pp. 59-66, 2012.

89. A. Chennakesava Reddy, M. Vidya Sagar and G. Satish Babu, Optimal Design of Automobile Leaf Spring using Finite Element Analysis, International Journal of Theoretical and Applied Mechanics, Vol.7, No.2, pp. 87-94, 2012.

90. D.V. Srikanth, K.K. Chaturvedi and A. CHennakesava Reddy, Determination of a large tilting pad thrust bearing angular stiffness, Tribology International, Vol. 47, No.1, pp. 69-76, 2012.

91. A. Chennakesava Reddy, Evaluation of local thinning during cup drawing of gas cylinder steel using isotropic criteria, International Journal of Engineering and Materials Sciences, Vol.5, No.2, pp.71-76, 2012.

92. S. Madhava Reddy, A. Chennakesava Reddy and K. Sudhakar Reddy, Latest developments in condition monitoring of machining operations, Journal of Applied Sciences, Vol.12, No.10, pp.938-946, 2012.

93. S. Madhava Reddy and A. Chennakesava Reddy, Influence of Process Parameters on Residual Stresses Induced by Milling of Aluminum Alloy Using Taguchi’s Techniques, International Journal of Mechanical Engineering, Vol.5, No.2, pp. 69-74, 2013.

94. S. Madhava Reddy and A. Chennakesava Reddy, Studies on Process Parameters in End Milling Operations of Aluminium Alloy, International Journal of Engineering Research & Technology, Vol.2, No.3, pp. 1-5, 2013.

95. A. Balaram Naik, A. Chennakesava Reddy and B. Balakrishna, Characteristics optimization of different welding processes on duplex stainless steels using statistical approach and Taguchi technique – A review guide, International Journal of Engineering Inventions, Vol.2, No.3, pp. 26-34, 2013.

96. S. Madhava Reddy, A. Chennakesava Reddy, Studies on Tool Wear, Cutting Forces and Chip Morphology During High-Speed Milling of Al-Si-Mg- Fe Alloys, International Journal of Engineering Sciences & Research Technology, Vol.2, No.8, pp.1987-1995, 2013.

97. S Pichi Reddy, B Ramana and A. Chennakesava Reddy, Sintering Characteristics of Al–Pb/Fly-Ash Metal Matrix Composites, Transactions  Indian Institute Metals,  Vol. 66, No.1, pp. 87-95, 2013.

98. D. V. Srikanth, K.K. Chaturvedi and A. Chenna kesava Reddy, Determination of Pad Thickness in a Large Thrust Bearing, Journal of Tribology and Surface Engineering, Vol.3, No.1&2, pp. 67-86, 2013.

99. S. Sreenivasulu and A. Chennakesava Reddy, Mechanical Properties Evaluation of Bamboo Fiber Reinforced Composite, International Journal of Engineering Research, Vol.3, Special Issue:1, pp.187-194, 2014.

100. J. N. Malleswara Rao, P. Rakesh, P. S. Srinivas and  A. Chennakesava Reddy, Experimental Technique to Minimize the Model Material Requirement for the Turbine Shaft in Rapid Prototyping (FDM), International Journal of Innovative Research in Advanced Engineering, Vol.1, No.3, pp.1-5, 2014.

101. J. N. Malleswara Rao, A. Chennakesava Reddy and M. Sumalatha, Experimental Investigation of the influence of Roller Burnishing Tool Passes on Surface Roughness and Hardness of Brass Specimens, International Journal of Research in Mechanical Engineering & Technology, Vol.4, Special Issue:1, pp.142-145, 2014.

102. B.M. Angadi, R. Hiremath, A. Chennakesava Reddy, V. V. Katti and S. A. Kori, Studies on the Thermal Properties of Hypereutectic Al–Si Alloys by Using Transient Method, Journal of Mechanical Engineering Research and Technology, Vol.2, No.1, pp. 538-544, 2014.

103. S. Madhava Reddy, A. Chennakesava Reddy, K. Sudhakar Reddy, Effect of chip segmentation on cutting forces at high speed milling of Al-alloys, International Journal of Current Engineering and technology, Vol.2, No.2, pp.277-280, 2014.

104. D. V. Srikanth K.K. Chaturvedi and A. Chennakesava Reddy,  Evaluation of Operational Characteristics in a Large Thrust Bearing,  International Journal of Surface Engineering and Interdisciplinary Materials, Vol.2, No.1, pp.59-73, 2014.

105. A. Chennakesava Reddy, Simulation analysis of four-pass shape roll forming of I-sections, International Journal of Mechanical and Production Engineering Research and Development, Vol.5, No.1, pp.35-44, 2015.

106. A. Chennakesava Reddy, Influence of volume fraction, size, cracking, clustering of particulates and porosity on the strength and stiffness of 6063/SiCp metal matrix composites, International Journal of Research in Engineering and Technology, Vol.4, No.1, pp.434-442, 2015.

107. A. Chennakesava Reddy, Studies on loading, cracking and clustering of particulates on the strength and stiffness of 7020/SiCp metal matrix composites, International Journal of Metallurgical & Materials Science and Engineering, Vol.5, No.1, pp. 53-66, 2015.

108. A. Chennakesava Reddy,  Cause and Catastrophe of Strengthening Mechanisms in 6061/Al2O3 Composites Prepared by Stir Casting Process and Validation Using FEA, International Journal of Science and Research, Vol.4, No.2, pp.1272-1281, 2015.

109. A. Chennakesava Reddy,  Influence of Particle Size, Precipitates, Particle Cracking, Porosity and Clustering of Particles on Tensile Strength of 6061/SiCp Metal Matrix Composites and Validation Using FEA, International Journal of Material Sciences and Manufacturing Engineering, Vol. 42, No.1, pp. 1176-1186, 2015.

110. A. Chennakesava Reddy, Fatigue Life Evaluation of Joint Designs for Friction Welding of Mild Steel and Austenite Stainless Steel, International Journal of Science and Research, Vol.4, No.02, pp.1714-1719, 2015.

111. A. Chenaakesava Reddy, B. Kotiveerchari and P. Rami Reddy, Robotic Configuration for Paralyzed Swing Leg with Motion Captured Stance Hip Orientation, International Journal of Scientific & Engineering Research, Vol.6, No.2, pp.166-170, 2015.

112. A. Chennakesava Reddy,  Reliability of Automobile Car Wheel Subjected to Fatigue Radial Loading by Weibull Analysis, International Journal of Scientific & Engineering Research, Vol.6, No.2, pp.628-631, 2015.

113. A. Chenaakesava Reddy, B. Kotiveerchari and P. Rami Reddy, Robotic configuration for paralyzed swing leg with effort minimization of all joints to get gait trajectory, International Journal of Advanced Research, Vol.3, No.2, pp.981-990, 2015.

114. A. Chenaakesava Reddy,  Evaluation of Curing Process for Carbon-Epoxy Composites by Mechanical Characterization for Re-entry Vehicle Structure, International Journal of Scientific & Engineering Research, Vol.6, No.3, pp.65-70, 2015.

115. A. Chenaakesava Reddy, B. Kotiveerchari and P. Rami Reddy,  Saving of Thermal Energy in Air-Gap Insulated Pistons Using Different Composite Materials for Crowns, International Journal of Scientific & Engineering Research, Vol.6, No.3, pp.71-74, 2015.

116. A. Chenaakesava Reddy, Cause and Catastrophe of Strengthening Mechanisms in 6063/Al2O3 Composites Prepared by Stir Casting Process: Validation through FEA, International Journal of Scientific & Engineering Research, Vol.6, No.3, pp.75-83, 2015.

117.  D.U.M. Manikanta and A. Chenaakesava Reddy,  Fracture Behavior of 6061 Al-Alloy Pipes under Bursting Loads with Crack Depth Variation, International Journal of Scientific & Engineering Research, Vol.6, No.3, pp.338-343, 2015.

118. A. Chenaakesava Reddy, B. Kotiveerchari and P. Rami Reddy, Robotic configuration for paralyzed swing leg with effort minimization of stance hip torques, International Journal of Advanced Research, Vol.3, No.3, pp.659-668, 2015.

119. A. Chenaakesava Reddy, Cause and catastrophe of strengthening mechanisms in 7020/Al2O3 composites prepared by stir casting process and validation through FEA, International Journal of Advanced Research, Vol.3, No.3, pp.603-614, 2015.

120. S. Madhava Reddy and A. Chennakesava Reddy, Effect of contact time, sliding speed and normal pressure on friction of Al-Si-Mg-Fe alloy, International Journal Engineering Science & Management, Vol.5, No.1, pp.237-241, 2015.

121.  D. Aradhana K. Karibasappa and A. Chennakesava Reddy,  Feature Extraction and Recognition Using Soft Computing Tools, International Journal of Scientific & Engineering Research, Vol.6, No 3, pp.1436-1443, 2015.

 

122. A. Chenaakesava Reddy, B. Kotiveerchari and P. Rami Reddy, Robotic Configuration for Paralyzed Swing Leg with Effort Minimization of Stance Hip Torques and Bounded Stance Hip Orientation, International Journal of Scientific & Engineering Research, Vol.6, No.4, pp.370-377, 2015.

123. A. Chenaakesava Reddy, Characterization of Mechanical and Tribological Behavior of (Nylon 6 + Graphite + Teflon) Nano Particulate Composite: Application Perspective, International Journal of Scientific & Engineering Research, Vol.6, No.4, pp.378-386, 2015.

124. Kothapalli Chandini and A. Chennakesava Reddy, Parametric Importance of Warm Deep Drawing Process for 1070A Aluminium Alloy: Validation through FEA, International Journal of Scientific & Engineering Research, Vol.6, No.4, pp.399-407, 2015.

125.  Balla Yamuna and A. Chennakesava Reddy, Parametric Merit of Warm Deep Drawing Process for 1080A Aluminium Alloy: Validation through FEA, International Journal of Scientific & Engineering Research, Vol.6, No.4, pp.416-424, 2015.

126. A. Chennakesava Reddy, Fatigue Life Prediction of Different Joint Designs for Friction Welding of 1050 Mild Steel and 1050 Aluminum, International Journal of Scientific & Engineering Research, Vol.6, No.4, pp.408-412, 2015.

127. Thirunagari Srinivas and A. Chennakesava Reddy, Parametric Optimization of Warm Deep Drawing Process of 1100 Aluminum Alloy: Validation through FEA, International Journal of Scientific & Engineering Research, Vol.6, No.4, pp.425-433, 2015.

128. A. Chennakesava Reddy, Homogenization and Parametric Consequence of Warm Deep Drawing Process for 1050A Aluminum Alloy: Validation through FEA, International Journal of Science and Research, Vol.4, No 4, pp.2034-2042, 2015.

129. A. Chennakesava Reddy, Evaluation of Curing Process for Kevlar 49-Epoxy Composites by Mechanical Characterization Designed for Brake Liners, International Journal of Science and Research, Vol.4, No.4, pp.2365-2371, 2015.

130. D.U.M. Manikanta and A. Chenaakesava Reddy, Fracture Behavior of 6061 Al-Alloy Pipes under Bursting Loads with Crack Length Variation, International Journal of Advanced Research, Vol.3, No.4, pp.657-665, 2015.

131. A. Chennakesava Reddy,  Evaluation of Curing Process for Bi-directional S-Glass (5HS)/Epoxy (780E +782H) Composites Fabricated by Vacuum Infusion Process for Wind Energy Blades, International Journal of Advanced Research, Vol.3, No.4, pp.667-675, 2015.

132. A. Chennakesava Reddy, Turbulent and incompressible flow in a shell and tube heat exchanger, International Journal of Advanced Research, Vol.3, No.4, pp.676-683, 2015.

133. Karan Agarwal, Nirmala Akhil, Regalla Srinivas and A. Chennakesava Reddy,  Enhancement in Mechanical Behavior of Nylon/Teflon Composites by Addition of Nano Iron Oxide (γ-Fe2O3), International Journal of Science and Research, Vol.4, No.5, pp.927-932, 2015

134.  V. Srija and A. Chennakesava Reddy, Finite Element Analysis of Friction Welding Process for 2024Al Alloy and UNS C23000 Brass, International Journal of Science and Research, Vol.4, No.5, pp.1685-1690, 2015.

135. T. Santhosh Kumar and A. Chennakesava Reddy, Finite Element Analysis of Friction Welding Process for 2024Al Alloy and AISI 1021 Steel, International Journal of Science and Research, Vol.4, No.5, pp.1679-1684, 2015.

136. A. Raviteja and A. Chennakesava Reddy, Finite Element Analysis of Friction Welding Process for UNS C23000 Brass and AISI 1021 Steel, International Journal of Science and Research, Vol.4, No.5, pp. 1691-1696, 2015.

137. A. Chennakesava Reddy, Parametric Optimization of Warm Deep Drawing Process of 2014T6 Aluminum Alloy Using FEA, International Journal of Scientific & Engineering Research, Vol.6, No.5, pp.1016-1024, 2015.

138.  A. Chennakesava Reddy, Characterization of Mechanical Behavior of Nylon/Teflon Nano Particulate Composites, International Journal of Advanced Research, Vol.3, No.5, pp. 1241-1246, 2015.

139. A. Chennakesava Reddy, Finite Element Analysis of Warm Deep Drawing Process for 2017T4 Aluminum Alloy: Parametric Significance Using Taguchi Technique, International Journal of Advanced Research, Vol.3, No.5, pp.1247-1255, 2015.

140. A. Chennakesava Reddy, Parametric Significance of Warm Drawing Process for 2024T4 Aluminum Alloy through FEA, International Journal of Science and Research, Vol.4, No.5, pp.2345-2351, 2015.

141. D.U.M. Manikanta and A. Chennakesava Reddy, Optimization of Fracture Behavior of AA6061 Al- Alloy Pipes Using Finite Element Analysis, International Journal of Science and Research, Vol.4, No.6, pp.1509-1515, 2015.

142. A. Chennakesava Reddy, Necessity of Strain Hardening to Augment Load Bearing Capacity of AA1050/AlN Nanocomposites, International Journal of Advanced Research, Vol.3, No.6, pp.1211-1219, 2015.

143. Balla Yamuna and A. Chennakesava Reddy, Finite Element Analysis of Warm Deep Drawing Process for Conical Cup of AA1080 Aluminum Alloy, International Journal of Advanced Research, Vol.3, No 6, pp.1309-1317, 2015.

144. Kothapalli Chandini and A. Chennakesava Reddy, Finite Element Analysis of Warm Deep Drawing Process for Pyramidal Cup of AA1070 Aluminum Alloy, International Journal of Advanced Research, Vol.3, No.6, pp.1325-1334, 2015.

145. Thirunagari Srinivas and A. Chennakesava Reddy, Finite Element Analysis of Warm Deep Drawing Process for Rectangular Cup of AA1100 Aluminum Alloy, International Journal of Advanced Research, Vol.3, No.6, pp.1383-1391, 2015.

146. A. Chennakesava Reddy, The Essence of Research Development as a Component in the Faculty Workload of Technological Universities and Engineering Colleges, International Journal of Science and Research, Vol.4, No.7, pp.29-33, 2015.

147. T. Prasad and A. Chennakesava Reddy, Effects of Adhesive Characteristics between Matrix and Reinforced Nanoparticle of AA6061/Carbon Black Nanocomposites, International Journal of Scientific & Engineering Research, Vol.6, No.7, pp.40-45, 2015.

148. T. Prasad and A. Chennakesava Reddy, Effects of Adhesive Characteristics between Matrix and Reinforced Nanoparticle of AA6063/Carbon Black Nanocomposites, International Journal of Science and Research, Vol.4, No.7, pp. 1777-1781, 2015.

149. A. Chennakesava Reddy, Formability of Warm Deep Drawing Process for AA1050-H18 Pyramidal Cups, International Journal of Science and Research, Vol.4, No.7, pp.2111-2119, 2015.

150. A. Chennakesava Reddy, Formability of Warm Deep Drawing Process for AA1050-H18 Rectangular Cups, International Journal of Mechanical and Production Engineering Research and Development, Vol.5, No 4, pp.85-97, 2015.

151. A. Chennakesava Reddy, Finite Element Analysis of Friction Welding Process for AA7020-T6 and Ti-6Al-4V Alloy: Experimental Validation, International Journal of Science and Research, Vol.4, No.8, pp.947-952, 2015.

152. A. Chennakesava Reddy, Influence of Interphase on Tensile Behavior of Strain Hardened AA1100/AlN Nanocomposites Using RVE Models and Experimental Validation, International Journal of Engineering, Science and Technology, Vol.7, No.7, pp.239-250, 2015.

153. A. Chennakesava Reddy, Formability of superplastic deep drawing process with moving blank holder for AA1050-H18 conical cups, International Journal of Research in Engineering and Technology, Vol.4, No.8, pp.124-132, 2015.

154. A. Chennakesava Reddy, Design and Finite Element Analysis of E-glass Fiber Reinforced Epoxy Composite Air Bottle used in Missile System: Experimental Validation, International Journal of Scientific & Engineering Research, Vol.6, No.8, pp.157-165, 2015.

155. A. Chennakesava Reddy, Application of Eulerian and Lagrangian couplings to estimate the influence of shock pressure loading on the submersible hull using finite element analysis, International Journal of Current Research, Vol.7, No.8, pp.19542-19547, 2015.

156. A. Chennakesava Reddy, Application of Eulerian and Lagrangian couplings to estimate the influence of shock pressure loading on the titanium submersible hull using finite element analysis, International Journal of Scientific Research, Vol.4, No.9, pp.71-75, 2015.

157. A. Chennakesava Reddy, Estimation of damage in cylinder subjected to shock pressure load using finite element analysis, International Journal of Advanced Research, Vol. 3, No. 8, pp. 552-556, 2015.

158. A. Chennakesava Reddy, Effects of Adhesive and Interphase Characteristics between Matrix and Reinforced Nanoparticle of AA2124/AlN Nanocomposites: Mathematical and Experimental Validation, International Journal of Engineering and Advanced Technology, Vol.5, No 1, pp.5-12, 2015.

159. A. Chennakesava Reddy, Effects of Adhesive and Interphase Characteristics Between Matrix and Reinforced Nanoparticle of AA3105/AlN Nanocomposites, International Journal of Mechanical Engineering, Vol.4, No.5, pp.25-36, 2015.

160. A. Chennakesava Reddy, Shock Analysis of E-Glass/Epoxy Composite Submersible Hull Subjected to Pressure Loads of Underwater Explosion using Finite Element Method - Experimental Validation, International Journal of Scientific & Engineering Research Vol.6, No.9, pp.1461-1468, 2015.

161. A. Chennakesava Reddy, Consequences of Interphase between Matrix and Reinforced Nanoparticle on Behavior of AA6262/AlN Nanocomposites, International Journal of Science and Research, Vol.4, No.9, pp.1045-1049, 2015.

162. A. Chennakesava Reddy, Effects of Adhesive And Interphase Characteristics Between Matrix And Reinforced Nanoparticle of AA4032/AlN Nanocomposites, International journal of research in mechanical engineering, Vol.3, No 5, pp.13-21, 2015.

163. A. Chennakesava Reddy, Effects of Adhesive and Interphase Characteristics between Matrix and Reinforced Nanoparticle of AA5154/AlN Nanocomposites, International Journal of Advanced Research, Vol.3, No.9, pp.703-710, 2015.

164. A. Chennakesava Reddy, Reduction of Vibrations and Noise using Nylon-66/Al2O3 Nanocomposite Gear Box in Lathe, International Journal of Science and Research, Vol.4, No.9, pp.1476-1480, 2015.

165. A. Chennakesava Reddy, Reduction of Vibrations and Noise using Nylon-66/SiC Nanocomposite Gear Box in Lathe, International Journal of Science and Research, Vol.4, No.9, pp.1485-1489, 2015.

166. A. Chennakesava Reddy, Reduction of Vibrations and Noise using Nylon-66/Fe2O3 Nanocomposite Gear Box in Lathe, International Journal of Science and Research, Vol.4, No.9, pp.1490-1494, 2015.

167. A. Chennakesava Reddy, Reduction of Vibrations and Noise using AA7020/Al2O3 Nanocomposite Gear Box in Lathe, International Journal of Scientific & Engineering Research, Vol.6, No.9, pp.671-677, 2015.

168. A. Chennakesava Reddy, Reduction of Vibrations and Noise using AA7020/SiC Nanocomposite Gear Box in Lathe, International Journal of Scientific & Engineering Research, Vol.6, No.9, pp.678-684, 2015.

169. A. Chennakesava Reddy, Reduction of Vibrations and Noise using AA7020/Fe2O3 Nanocomposite Gear Box in Lathe, International Journal of Scientific & Engineering Research, Vol.6, No.9, pp.685-691, 2015.

170. A. Chennakesava Reddy, Performance of Warm Deep Drawing Process for AA1050 Cylindrical Cups with and Without Blank Holding Force, International Journal of Scientific Research, Vol.4, No.10, pp.358-365, 2015.

171. A. Chennakesava Reddy, Effects of Adhesive and Interphase Characteristics between Matrix and Reinforced Nanoparticle of AA8090/AlN Nanocomposites, Asian journal of engineering and technology, Vol.3, No.5, pp.505-511, 2015.

172. A. Chennakesava Reddy, Estimation of Thermoelastic Behavior of Three-phase: AA1100/Ni-Coated Boron Carbide Nanoparticle Metal Matrix Composites, International Journal of Scientific & Engineering Research, Vol.6, No.10, pp.662-667, 2015.

173. A. Chennakesava Reddy, Effects of Adhesive and Interphase Characteristics between Matrix and Reinforced Nanoparticle of AA6061/AlN Nanocomposites, International Journal of Nanotechnology and Application, Vol.5, No.5, pp.1-10, 2015.

174. A. Chennakesava Reddy, Formability of High Temperature and High Strain Rate Superplastic Deep Drawing Process for AA2219 Cylindrical Cups, International Journal of Advanced Research, Vol.3, No.10, pp.1016-1024, 2015.

175. A. Balaram Niak and A. Chennakesava Reddy, Optimization of TIG welding process parameters on angular distortion of stainless steel 301 alloy weldments, Journal of Materials Science and Mechanical Engineering, Vol.2, No.13, pp.32-40, 2015.

176. A. Chennakesava Reddy, Development of Alumino-Silicate Investment Shell Moulds to Cast 6061 Al-Alloy, International Journal of Science and Research, Vol.4, No.11, pp.1183-1187, 2015.

177. A. Chennakesava Reddy, Effects of Adhesive and Interphase Characteristics between Matrix and Reinforced Nanoparticle of AA7175/AlN Nanocomposites, International Journal of Scientific Engineering and Research, Vol.3, No.11, pp.95-98, 2015.

178. A. Chennakesava Reddy, Comparison of microstructure of Al-Cu alloys cast in calcite investment shell and dry sand moulds, International Journal of Engineering Sciences & Research Technology, Vol.4, No.11, pp.686-693, 2015.

179. A. Chennakesava Reddy and B. Kotiveerchari, Simulation of Femur Bone Fracture in Car Accident using CT Scan Data and Finite Element Analysis, International Journal of Science and Research, Vol.4, No.11, PP.1805-1807, 2015.

180. A. Chennakesava Reddy,  Trustworthy prediction of bursting strength of ductile iron pipes based on Fitnet FSS criterion, International Journal of Research in Engineering and Technology, Vol.4, No.12, pp.48-53, 2015.

181. R. V. S. K. Varma and A. Chennakesava Reddy, Optimization of Bursting Behavior of AA2090 Al-Alloy Pipes Using Taguchi Techniques and Finite Element Analysis, International Journal of Scientific Engineering and Research, Vol.3, No. 12, pp.35-38, 2015.

182. M. Akhil and A. Chennakesava Reddy, Evaluation of Structural Integrity under Bursting Conditions of Heat Treated 2219 Al-Alloy Pipes Using Finite Element Analysis, International Journal of Scientific Engineering and Research, Vol.3, No.12, pp.39-43, 2015.

183. A. Sreeteja and A. Chennakesava Reddy, Influence of Crack Size on Fracture Behavior of Heat Treated 2011 Al-Alloy Pipes Using Finite Element Analysis, International Journal of Scientific Engineering and Research, Vol.3, No.12, pp. 47-50, 2015.

184. D. V. Srikanth, K.K. Chaturvedi and A. Chenna kesava Reddy, Theoretical evaluation of the operational characteristics in a large thrust bearing, Tribology online, Vol.10, No.5, pp. 336-343, 2015.

185. B. M. Angadi, A. Chennakesava Reddy,  I.G.Bhavi,  S.S.Chappar, S. A. Kori,  Finite element analysis of hypereutectic aluminium silicon alloys, International Journal of Industrial Engineering and Technology, Vol.7, No.1, pp.51-56, 2015.

186. B. M. Angadi, A. Chennakesava Reddy, V. V. Katti, V.V. Nagathan, S. A. Kori, Effect of Phosphorous, Titanium-Boron and Titanium on Thermal Properties of Hypereutectic Aluminium-Silicon Alloys, International Journal of Applied Engineering Research, Vol.10, No.23, pp.43752-43757, 2015.

187. Chennakesava R Alavala, Nano-mechanical modeling of thermoelastic behavior of AA6061/silicon oxide nanoparticulate metal matrix composites, International Journal of Science and Research, Vol.5, No.1, pp.550-553, 2016.

188. Chennakesava R Alavala, Nanomodeling of nonlinear thermoelastic behavior of AA5454/ silicon nitride nanoparticulate metal matrix composites, International Journal of Engineering Research and Application, Vol.6, No.1, pp.104-109, 2016.

189. Chennakesava R Alavala, High temperature and high strain rate superplastic deep drawing process for AA2618 alloy cylindrical cups, International Journal of Scientific Engineering and Applied Science, Vol.2, No.2, pp.35-41, 2016.

190. Chennakesava R Alavala, Evaluation of parametric significance in friction welding process for AA2024 and Zr705 alloy using finite element analysis, International Journal of Engineering Research & Technology, Vol.5, No.1, pp.84-89, 2016.

191. Chennakesava R Alavala, Reliability computation of bursting strength of ammonia pipelines based on Choi’s criterion, International Journal of Innovative Research in Science, Engineering and Technology, Vol.5, No.1, pp.28-36, 2016.

192. Chennakesava R Alavala, Thermoelastic Behavior of Nanoparticulate BN/AA5050 Alloy Metal Matrix Composites, International Journal of Engineering and Advanced Research Technology, Vol.2, No.1, pp.6-8, 2016.

193. Chennakesava R Alavala, Dependability of bursting strength on sulphate reducing bacteria promoted corrosion of natural gas pipelines, International Journal of Scientific & Engineering Research, Vol.7, No.1, pp.51-57, 2016.

194. A. Chennakesava Reddy, Thermo-mechanical Behaviour and Metal –to-Mould Reactions of Cristobalite Investment Shell Moulds to Cast Ti-6Al-4V Alloy , International journal of advanced research, Vol.4, No.1, pp.101-106, 2016.

195. Chennakesava R Alavala, Influence of Chlorine Induced Corrosion and Temperature of Exothermic Reaction on Failure of Methyl Isocyanate (MIC) Storage Tanks, American Journal of Engineering Research, Vol.5, No.2, pp.1-9, 2016.

196. A. Chennakesava Reddy, Finite Element Analysis of Injuries in Shoulder Bones and Joints: a Review, International Journal of Bio Technology and Research, Vol.6, No.1, pp.29-42, 2016.

197. Chennakesava R Alavala, Practicability of High Temperature and High Strain Rate Superplastic Deep Drawing Process for AA3003 Alloy Cylindrical Cups, International Journal of Engineering Inventions, Vol.5, No.3, pp.16-23, 2016.

198. Chennakesava R Alavala, High temperature and high strain rate superplastic deep drawing process for AA5049 alloy cylindrical cups, International Journal of Engineering Sciences & Research Technology, Vol.5, No.2, pp.261-268, 2016.

199. Chennakesava R Alavala, Influence of Crack Dimensions and Heat Treatment on Fracture Behaviour of AA1050 Alloy Pipes Subjected to Bursting Pressures, International Journal of Innovative Research in Advanced Engineering, Vol.2, No.3, pp.1-5, 2016.

200. Chennakesava R Alavala, Evaluation of Parametric Significance in Friction Welding Process for AA7020 and Zr705 Alloy using Finite Element Analysis, International Journal of Emerging Technology and Advanced Engineering, Vol.6, No.2, pp.40-46, 2016.

201. Chennakesava R Alavala, Micromechanical Modelling of Thermoelastic Behavior of AA7020/TiC Metal Matrix Composites, International Journal of Scientific Engineering and  Research, Vol.4, No.2, pp.1-5, 2016.

202. Chennakesava R Alavala, Micromechanics of Thermoelastic Behavior of AA2024/MgO Metal Matrix Composites, International Journal of Advanced Technology in Engineering and Science, Vol.4, No.1, pp.33-40, 2016.

203. Chennakesava R Alavala, Micromechanics of Thermoelastic Behavior of AA6070 Alloy/Zirconium Oxide Nanoparticle Metal Matrix Composites, International Journal of Engineering Research & Science, vol.2, No.2, pp.1-8, 2016.

204. P. Pavani, A. Chennakesava Reddy, Micromechanics of Thermoelastic Behavior of Polypropylene/Calcite (Modified with Triton X-100) Nanocomposites, International Journal of Science and Research, Vol.5, No.2, pp.1003-1006, 2016.

205. Chennakesava R Alavala, Effect of Thermoelastic Behavior on interfacial debonding and Particulate Fracture in AA1100/TiN Nanoparticulate Metal Matrix Composites, International Journal of Science and Research, Vol.5, No.3, pp.1295-1300, 2016.

206. Chennakesava R Alavala, Weldability of Friction Welding Process for AA2024 Alloy and SS304 Stainless Steel using Finite Element Analysis, International Journal of Engineering Research and Application, Vol.6, No.3, pp.53-57, 2016.

207. Chennakesava R Alavala, Influence of Temperature on Particulate Fracture of AA2024 Alloy/Titanium Oxide nanoparticulate Metal Matrix Composites, International Journal of Scientific Engineering and Applied Science, Vol.2, No.4, pp.1-6, 2016.

208. Chennakesava R Alavala, Suitability of High Temperature and High Strain Rate Superplastic Deep Drawing Process for AA5052 Alloy, International Journal of Engineering and Advanced Research Technology, Vol.2, No.3, pp.11-14, 2016.

209. Chennakesava R Alavala, Influence of CTE Mismatch on Debonding and Particulate Damage in AA1100 Alloy/ZrC Nanoparticulate Metal Matrix Composites, International Journal of Innovative Research in Science, Engineering and Technology, Vol.5, No.3, pp.3489-3495, 2016.

210. A. Balaram Naik, A. Chennakesava Reddy, An Experimental Investigation of Shielded Metal Arc Welding processes on Duplex Stainless Steel to control and correction of distortion in Weldments, International Journal of Engineering Research, Vol.5, No.2, pp.421-426, 2016.

211. Y. Lekhana, A. Nikhila, K. Bharath, B. Naveen, A. Chennakesava Reddy5, Weldability Analysis of 316 Stainless Steel and AA1100 Alloy Hollow Tubes using Rotational Friction Welding Process, International Journal of Science and Research, Vol.5, No.5, pp.622-627, 2016.

212. Seelam Pitchi Reddy, A. Chennakesava Reddy, Tensile and Flexural Strength of OKRA Fiber Reinforced Polymer Composites, International Journal of Engineering and Management Research, Vol.6, No.1, pp.491-495, 2016.

213. V. Srija,  A. Chennakesava Reddy, Single Point Incremental Forming of AA1050-H18 Alloy Frustum of Cone Cups, International Journal of Science and Research, Vol.5, No.6, pp.1138-1143, 2016.

214. T. Santhosh Kumar, A. Chennakesava Reddy, Finite Element Analysis of Formability of Pyramid-al Cups Fabricated from AA1100-H18 Alloy, International Journal of Science and Research, Vol.5, No.6, pp.1172-1177, 2016.

215. A. Raviteja, A. Chennakesava Reddy, Finite Element Analysis of Single Point Incremental Deep Drawing Process for Truncated Pyramidal Cups from AA 1070 Alloy, International Journal of Innovative Science, Engineering & Technology, Vol.3, No.6, pp.263-268, 2016.

216. K. Koundinya, A. Chennakesava Reddy, Interface Material for Enhancement of Weldability between Dissimilar Materials: 405 Ferritic Stainless Steel and 705 Zr Alloy by Friction Welding Process, International Journal of Science and Research, Vol.5, No.6, pp.1366-1370, 2016.

217. V. Srija, A. Chennakesava Reddy, NUMERICAL SIMULATION OF TRUNCATED PYRAMIDAL CUPS OF AA1050-H18 ALLOY FABRICATED BY SINGLE POINT INCREMENTAL FORMING, INTERNATIONAL JOURNAL OF ENGINEERING SCIENCES & RESEARCH TECHNOLOGY, Vol.5, No.6, pp.741-749, 2016.

218. T. Santhosh Kumar, A. Chennakesava Reddy, Single Point Incremental Forming And Significance Of Its Process Parameters On Formability Of Conical Cups Fabricated From Aa1100-H18 Alloy, International Journal of Engineering Inventions, Vol.5, No.6, pp.10-18, 2016.

219. A. Raviteja, A. Chennakesava Reddy, IMPLICATION OF PROCESS PARAMETERS OF SINGLE POINT INCREMENTAL FORMING FOR CONICAL FRUSTUM CUPS FROM AA1070 USING FEA, International Journal of Research in Engineering and Technology, Vol.5, No.6, pp.124-129, 2016.

220. Chennakesava R Alavala, Synthesis and Tribological Characterization of Cast AA1100-B4C Composites, International Journal of Science and Research, Vol.5, No.6, pp.2404-2407, 2016.

221. M. Swaroopa, T. Kishen Kumar Reddy, A. Chennakesava Reddy B.Majumdar, 3D Numerical Simulation of 'Herringbone' Defective Ribbon formation in planar flow melt spinning process., International Journal of Scientific & Engineering Research, Vol.7, No.6, pp.17-21, 2016.

222. T. Santhosh Kumar, V. Srija, A. Ravi Teja,  A. Chennakesava Reddy, Influence of Process Parameters of Single Point incremental Deep Drawing Process for Truncated Pyramidal Cups from 304 Stainless Steel using FEA, International Journal of Scientific & Engineering Research, Vol.7, No.6, pp.100-105, 2016.

223. A. Balaram Naik, A. Chennakesava Reddy, Experimental Analysis of TIG Welding and Comparison between Activated-TIG and TIG on Duplex Stainless Steel (2205), International Journal of Scientific & Engineering Research, Vol.7, No.6, pp.115-122, 2016.

224. G. Devendar.  A. Chennakesava Reddy, Study on Deep Drawing Process Parameters - A Review, International Journal of Scientific & Engineering Research, Vol.7, No.6, pp.149-155, 2016.

225. K. Shiva Kumar, A. Chennakesava Reddy, Study on Reinforcement Materials for Nylon Matrix Composites - A Review, International Journal of Scientific & Engineering Research, Vol.7, No.6, pp.156-160, 2016.

226. K. Koundinya, A. Chennakesava Reddy, Simulation of Joint Design on Weldability of Dissimilar Materials: 405 Ferritic Stainless Steel and 705 Zr Alloy by Friction Welding Process, International Journal of Scientific & Engineering Research, Vol.7, No.6, pp.261-265, 2016.

227. Chennakesava R Alavala, Prediction Models for Sliding Wear of AA3003/Al2O3 Composites, International Journal of Engineering Research and Application, Vol.6, No.7, pp.20-24, 2016.

228. Chennakesava R Alavala, Adhesive and Abrasive Wear Behavior of AA4015 Alloy/Si3N4 Metal Matrix Composites, Indian Journal of Engineering, Vol.13, No.34, pp.625-633, 2016.

229. Chennakesava R Alavala, FEM ANALYSIS OF SINGLE POINT INCREMENTAL FORMING PROCESS AND VALIDATION WITH GRID-BASED EXPERIMENTAL DEFORMATION ANALYSIS, International Journal of Mechanical Engineering, Vol.5, No.5, pp.1-6, 2016.

230. Chennakesava R Alavala, VALIDATION OF SINGLE POINT INCREMENTAL FORMING PROCESS FOR DEEP DRAWN PYRAMIDAL CUPS USING EXPERIMENTAL GRID-BASED DEFORMATION, International Journal of Engineering Sciences & Research Technology, Vol.5, No.8, pp.481-488, 2016.

 


 
Contact :
Dr. A. Chennakesava Reddy
Senior Professor
Mechanical Engineering
JNTUH University College of Engineering , Science & Technology Hyderabad

Official Email: chennakesava@jntuh.ac.in
Alternate Email: dr_acreddy@yahoo.com
Phone: +91-040 23152329