 Professional Experience
|
At JNTUH
| 1. |
ASSOCIATE PROFESSOR, JNTUH (2003 - 2010) |
| 2. |
ASSISTANT PROFESSOR, JNTUH (1989 - 2003) |
| 3. |
PROFESSOR, JNTUH (2010 - Till Date) |
|
|
|
|
Research
Publications
| International Journals |
| 1 . |
A.Seshappa, K.Prudhvi Raj, B.Anjaneya Prasad, Fabrication and Characterization of aluminium hybrid metal matrix composite with chillers, Materials Today, Vol No.online, ELSEVIER, December, 2020 |
| 2 . |
A.Seshappa, B.Anjaneya Prasad, Characterization and Investigation of Mechanical Properties of Aluminium Hybrid Nano-composites: Novel Approach of Utilizing Silicon Carbide and Waste Particles to Reduce Cost of Material, Springer, Vol No.online, SPRINGER, October, 2020 |
| 3 . |
J.Murali Naik, Dr B.Anjaneya Prasad, Experimental Investigations on Four-Stroke D.I Diesel Engine by using Diesel-Water Emulsions in LHR, International Journal for Research in Applied Science and Engineering Technology, ISBN No.2321-9653, Vol No.6, Issue No.VII, pp.264-272, IJRASET, July, 2018 |
| 4 . |
J.Murali Naik, Dr B.Anjaneya Prasad, Experimental Investigations on Four-Stroke D.I Diesel Engine by using Various Alternate Fuels and Biodiesel Blends, International Journal of New Technologies in Science and Engineering, ISBN No.2349-0780, Vol No.5, Issue No.5, pp.6-16, IJNTSE, 2018 |
| 5 . |
N.Chandra Sekhar Reddy, Dr B.Anjaneya Prasad, Fabrication and Properties evaluation of CNT Polymer Composites, International Journal of Mechanical and Production Engineering Research and Development, ISBN No.2249-8001, Vol No.8, Issue No.1, pp.1151-1160, IJMPERD, February, 2018 |
| 6 . |
Kalapala Prasad, B.Anjaneya Prasad, M.Anandarao, Performance Evaluation for Inconel-718 (Ni-Cr) Designed Structural Assembly of Gas Turbine Using Component mode Synthesis, International Journal of Industrial Engineering and Technology, ISBN No.0974-3146, Vol No.9, pp.23-46, IJIET, November, 2017 |
| 7 . |
Kalapala Prasad, B.Anjaneya Prasad, M.Anandarao, Optimization of Taper Ratio and Pre=Twist for Design of Gas Turbine Blade with respect to the Structural Criteria, International Journal of Mechanical Engineering and Technology, ISBN No.0976-6359, Vol No.8, Issue No.7, pp.1018-1033, IJMET, July, 2017 |
| 8 . |
Kalapala Prasad, B.Anjaneya Prasad, M.Anandarao, Material Optimization and Dynamic Approach for Performance Criteria in Application to Gas Turbine Blade to overcome Resonance, International Journal of Scientific & Engineering Research, ISBN No.2229-5518, Vol No.8, Issue No.6, pp.189-195, IJSER, June, 2017 |
| 9 . |
Kalapala Prasad, B.Anjaneya Prasad, M.Anandarao, Optimization of Twisted Aero-Foil Blade Angle of a Structural Gas Turbine Assembly, International Journal of Applied Engineering Research, ISBN No.0973-4562, Vol No.12, pp.4818-4824, www.ripublication.com, November, 2017 |
| 10 . |
J.Murali Naik, Dr B.Anjaneya Prasad, An Experimental Analysis on Heat Transfer in a Low Heat Rejection C I Engine, International Journal for Research in Applied Science and Engineering Technology, ISBN No.2321-9653, Vol No.5, Issue No.XI, pp.2185-2190, IJRASET, November, 2017 |
| 11 . |
N.Chandra Sekhar Reddy, Dr B.Anjaneya Prasad, Analysis of SIC MWCNT Polymer tubes for different applications, International Journal of Computer Technology and Research, Vol No.5, Issue No.5, pp.3950-3953, IJCTR, June, 2017 |
| 12 . |
J.Murali Naik, Dr B.Anjaneya Prasad, Experimental Analysis on Performance and Emission Characteristics in DI Diesel Engine an Effect of Emulisifed Fuel, International Journal for Research in Applied Science and Engineering Technology, ISBN No.2321-9653, Vol No.5, Issue No.XI, pp.2191-2198, IJRASET, November, 2017 |
| 13 . |
R Purushotham Naik, Dr C N Krishna Naik , Dr B.Anjaneya Prasad, Knowledge Management Practices in IBM IT Company of Hyderabad City, IJSER, ISBN No.2347-3878, Vol No.4, Issue No.10, pp.31-33, www.ijser.in, October, 2016 |
| 14 . |
N.Chandra Sekhar Reddy, Dr B.Anjaneya Prasad, Rapid Prototype of Carbon Nano Polymer Matrix Composite Tubes by Particle Depositing Method, International Journal of Innovative Technology and Research, Vol No.4, Issue No.6, pp.30-38, IJITR, November, 2016 |
| 15 . |
Dr.B.Anjaneya Prasad, Suresh patil G L, Dr D. Maheswar, The study of sloshing perpormance in three dimensional tanks for different volume fraction of fluid with time increment step and aceleration with CFD approach, AIJREAS, ISBN No.ISSN-2455-6300, Vol No.1, Issue No.6, pp.19-21, AIJREAS, January, 2016 |
| 16 . |
Dr.B.Anjaneya Prasad, T.Srilatha ,Dr.S.Chakaradhar Goud, Feasibility study of ORC implementation in Indian Power Plants, AIJREAS, ISBN No.2455-6300, Vol No.1, Issue No.6, pp.1-8, AIJREAS, June, 2016 |
| 17 . |
Dr B.Anjaneya Prasad, T.Srilatha ,Dr.S.Chakaradhar Goud, AReview on Organic Rankine Cycle with respect to Power Plant Engineering, AIJREAS, ISBN No.2455-6300, Vol No.1, Issue No.3, pp.14-21, AIJREAS, March, 2016 |
| 18 . |
Dr.B.Anjaneya Prasad, 6. N.Chandra Sekhar Reddy, Fabrication of Carbon Nano Tube by adding Nano Flyash to Alumina, AIJRRLJSM, ISBN No.2455-6300, Vol No.1, Issue No.5, pp.131-142, AIJRRLJSM, May, 2016 |
| 19 . |
Dr.B.Anjaneya Prasad, 6. N.Chandra Sekhar Reddy, Thermal , Mechanical and Structural Properties Evaluation of Carbon Nanotube based Aluminium Matrix Composite, IJREAS, ISBN No.2249-3905, Vol No.6, Issue No.6, pp.30-38, IJREAS, June, 2016 |
| 20 . |
Dr.B.Anjaneya Prasad, 7. N.Durgaprasad,M.V.S Murali Krishna , Experimental Investigations on Exhaust Emissions of Medium Grade Semi Adiabatic Diesel Engine with Rice Bran Biodiesel With Varied Engine Parameters, International journal of innovative research in science, Engineering and Technology, ISBN No.2319-8753, Vol No.5, Issue No.1, pp.1-8, IJIRSET, January, 2016 |
| 21 . |
Dr.B.Anjaneya Prasad, 7. N.Durgaprasad,M.V.S Murali Krishna , Investigations on Exhaust Emissions of DI Diesel Engine Fuelled With Crude Rice Bran Oil, IJCET, ISBN No.2347-5161, Vol No.6, Issue No.3, pp.847-852, IJCET, June, 2016 |
| 22 . |
Dr.B.Anjaneya Prasad, 8. N.Durgaprasad,M.V.S Murali Krishna , Experimental investigations on Exhaust Emissions of Low Grade Heat Rejection Diesel Engine With Crude Rice Bran Oil With Varied Engine parameters, International journal of innovative research in science, Engineering and Technology, ISBN No.2319-8753, Vol No.5, Issue No.1, pp.1-7, International journal of innovative research in science, Engineering and Technology, January, 2016 |
| 23 . |
Dr.B.Anjaneya Prasad, 10. N.Chandra sekhar Reddy, Fabrication and Micro Structural Analysis of Carbon Nanotube Materials by Adding Nano Flyash to Alumina, IJITR, ISBN No.ISSN:2248-9622, Vol No.6, Issue No.6, pp.6-10, IJITR, June, 2016 |
| 24 . |
Dr.B.Anjaneya Prasad, 11. Suresh Patil.G.L Dr.D.Maheswar , Dr.S.Chakradhar Goud, A Study On Sloshing Due To Vibrations Of Partially Filled Liquid Tank Subjected To Variable Acceleration, International Journal of Modern Engineering Research, ISBN No.ISSN:2249-6645, Vol No.6, Issue No.2, pp.65-71, International Journal of Modern Engineering Research, February, 2016 |
| 25 . |
Dr.B.Anjaneya Prasad, 12. J.Murali Naik ,Dr.R.Ramachandra , Expermental Study Of A Ci Engine To Estimating The Perpormance And Emmisions Analysis By Using WVO( Karanja Oil + Tyre Pyrolysis Oil) As Biodiesel Blended Oils, International Journal of Modern Engineering Research, ISBN No.ISSN:2249-6645, Vol No.6, Issue No.2, pp.89-100, International Journal of Modern Engineering Research, February, 2016 |
| 26 . |
B ANJANEYA PRASAD, K Chandra sekhar , N Eswara Prasad, Effect of Notch Root Radius on the Fracture Toughness of Epoxy and 0.5% wt% Amino MWCNTs-Reinforced Nanocomposites, Trans Indian Inst Met(2016), ISBN No.1069-1075, Vol No.1, Issue No.DOI 10.1007/s13666-015-0623-8., pp.1069-1075, Springer, August, 2015 |
| 27 . |
Dr.B.Anjaneya Prasad, 13. Suresh Patil.G.L,Dr.D.Maheswer , Dr.S.Chakradhar Goud, Analysis of The Effect of Variation of Baffle Height on The Liquid Sloshing In The Tank With CFD Approach, International Journal Of Engineering Research And Applications, ISBN No.ISSN:2248-9622, Vol No.5, Issue No.12, pp.115-121, International Journal Of Engineering Research And Applications, December, 2015 |
| 28 . |
Dr B.Anjaneya Prasad, B.Sridhar Babu, A.Kumaraswamy, Investigation of Elasto-Plastric Deformation Behavior of Haynes242 Alloy subjected to Nanoscale loads through Indentation experiments, Trans Indian Inst Met, Issue No.DOI 10.1007/s12666-015-0550-8, springer, May, 2015 |
| 29 . |
Dr B.Anjaneya Prasad, 17. K.Chandra Shekar,N. Eswara Prasad ,N.Krishna Kanth and P.K. Subramanian , Fracture behavior of carbon nanotube and carbon fibre –reinforced, epoxy-matrix hybrid composite, International Journal of materials and product Technology, Vol No.51, Issue No.1, pp.1-16, International Journal of materials and product Technology, 2015 |
| 30 . |
Dr B.Anjaneya Prasad, 15. V. Nikil Murthy,Dr.M.Ashok Kumar, Characterization of Carbon Fiber / Epoxy Composites with Different Fiber Parametric Quantity, IJSRST, ISBN No.ISSN:2395-6011, Vol No.1, Issue No.4, pp.49-58, IJSRST, October, 2015 |
| 31 . |
Dr B.Anjaneya Prasad, 16. Suresh Patil.G.L,Dr.D.Maheswer,Dr.S.Chakradhar Goud, The Model Analysis of a Partially Filled 3-Dimensional Liquid Storage Rectangular Tank With Study The Effect of Velocity on Sloshing by Increase in Baffle Numbers, International Journal of Emerging Technology and Advanced Engoneering, ISBN No.ISSN:2250-2459, Vol No.5, Issue No.12, pp.218-223, International Journal of Emerging Technology and Advanced Engoneering, December, 2015 |
| 32 . |
Dr B.Anjaneya Prasad, 17. K.Chandra Shekar,N.Eswara Prasad , Effect of Amino Multi –Walled Carbon Nanotube Reinforcement of the Plane Strain Fracture Toughness of Neat Epoxy, Journal of Aerospace Science and Technologies , Vol No.67, Issue No.2B, pp.330-334, Journal of Aerospace Science and Technologies , July, 2015 |
| 33 . |
B Sridhar Babu, A Kumara swamy, B Anjaneya Prasad, Effect of Indentation Size and Strain Rate on Nanomechanical Behavior of Ti-6Al-4VAlloy, Transactions of Indian Institute ofMetals (Springer) , Vol No.67, Issue No.5, Springer, October, 2014 |
| 34 . |
B.SridharBabu A.Kumaraswamy B.AnjaneyaPrasad, Elasto-plastic deformation behavior of Ti-6Al-4V and Haynes242 alloys at nanoscale loads, International Journal of materials and sciences, Vol No.9, Issue No.1, Research india publications, Nov, 2014 |
| 35 . |
M.V.S Murali krishna, N Durga Prasad Rao, B.Anjaneya Prasad, P.V.K Murthy, Comparative Performance with Different versions of low heat rejection combustion chambers with crude rice bran oil, Archive of Mechanical Engineering, Vol No.61, Issue No.4, pp.627-651, 2014 |
| 36 . |
N Durga Prasad Rao, M.V.S Murali Krishna, B.Anjaneya Prasad, P.V.K Murthy, Effect of injector opening pressure and injection timing on exhaust emissions and combustion characteristics of rice bran oil in crude form and bio diesel form in direct injection diesel engine, IOSR Journal of Engineering, Vol No.4, Issue No.2, pp.9-19, Febrauary, 2014 |
| 37 . |
M.V.S Murali krishna, N Durga Prasad Rao, B.Anjaneya Prasad, P.V.K Murthy, Comparative studies on Performance parameters of direct injection diesel engine with ceramic coated low heat rejection combustion chambers with rice bran oil based bio diesel, International journal of engineering research and technology, Vol No.3, Issue No.1, pp.479-492, january, 2014 |
| 38 . |
M.V.S Murali krishna, N Durga Prasad Rao, B.Anjaneya Prasad, P.V.K Murthy, Comparative studies on exahust emissions and combustion characteristics of direct injection diesel engine with medium grade low heat rejection combustion chambers with rice bran oil based bio diesel, Asian academic research journal of social sciences humanities, Vol No.1, Issue No.18, pp.155-175, AARJMD, Febrauary, 2014 |
| 39 . |
M.V.S Murali krishna, N Durga Prasad Rao, B.Anjaneya Prasad, P.V.K Murthy, Investigations on performance parameters with medium grade low heat rejection combustion chamber rice bran oil biodiesel, International journal of Applied engineering, Vol No.4, Issue No.1, pp.29-46, january, 2014 |
| 40 . |
N Durga Prasad Rao, M.V.S Murali Krishna, B.Anjaneya Prasad, P.V.K Murthy, The effect of thermal barrier coating on exhaust emissions and combustion chamber characteristics of diesel engine with rice bran oil based biodiesel, International journal of engineering research in engineering and technology, Vol No.2, Issue No.2, pp.183-190, Febrauary, 2014 |
| 41 . |
Chandra Shekar, K., Sai Priya, M., Subramanian, P,K., Anil Kumar., Anjaneya Prasad, B., and Eswara Prasad, N. , Processing, structure and flexural strength properties CNT and Carbon Fiber Reinforced Epoxy matrix hybrid Composite, Bulletin of Materials science, Vol No.37, pp.597-602, Springer, 2014 |
| 42 . |
Chandra Shekar, K., Naveen Kumar, M., Subramanian, P,K., Anil Kumar., Anjaneya Prasad, B., and Eswara Prasad, N., , Effect of Notch root radius on the apparent fracture toughness in CNT and carbon fibre reinforced, epoxy-matrix hybrid composite, Transactions of Indian Institute ofMetals (Springer) , Vol No.67, pp.33-39, Springer, 2014 |
| 43 . |
Chandra Shekar, K., Anjaneya Prasad, B., and Eswara Prasad, N, Interlaminar Shear strength of Multi – walled carbon nanotube and carbon fiber reinforced, epoxy- matrix hybrid composite, Procedia Materials Science (Elsevier), pp.1336-1343, Elseveir, 2014 |
| 44 . |
Chandra Shekar, K., Anjaneya Prasad, B., and Eswara Prasad, N, Effect of Amino Multi walled carbon nanotubes reinforcement on the flexural properties of neat epoxy, Applied Mechanics and Materials, Vol No.592-594, pp.912-916, Trans tech, 2014 |
| 45 . |
Dr B.Anjaneya Prasad, 17. K.Chandra Shekar, N.Eswara Prasad , Interlaminar shear strength of multi-walled carbon nanotube and carbon fiber reinforced,epoxy-matrix hybrid composite, Science Direct, pp.1336-1343, Elsevier, 2014 |
| 46 . |
Dr B.Anjaneya Prasad, 8. N.Durgaprasad,M.V.S Murali Krishna , Comparative studies on exhaust emissions and combustion characteristics of direct injection diesel engine with medium grade low heat rejection combustion chamber with rice brawn based biodiesel, AARJMD, ISBN No.ISSN:2319-2801, Vol No.1, Issue No.18, pp.155-175, AARJMD, FEBRUARY, 2014 |
| 47 . |
B.SridharBabu A.Kumaraswamy B.AnjaneyaPrasad, Numerical analysis of effect of friction on mechanical properties of Ti-6Al-4VAlloy through Nanoindentation, Procedia Engineering (Elsevier) , Vol No.64, pp.1048-1055, Elseveir, 2013 |
| 48 . |
B.SridharBabu A.Kumaraswamy B.AnjaneyaPrasad, Relevance of Nanoindentation Experiments in Materials Research-A Review, Advanced Materials Manufacturing & Characterization , Vol No.3, Issue No.1, March, 2013 |
| 49 . |
M.V.S Murali krishna, N Durga Prasad Rao, B.Anjaneya Prasad, P.V.K Murthy, Comparative studies on exahust emissions and combustion characteristics of direct injection diesel engine with diffrent combustion chambers with rice bran oil based bio diesel, International journal of engineering and innovations, Vol No.3, Issue No.6, pp.163-173, December, 2013 |
| 50 . |
M.V.S Murali krishna, N Durga Prasad Rao, B.Anjaneya Prasad, P.V.K Murthy, Improving of emissions and performance of rice bran oil in medium grade low heat rejection diesel engine, International journal of renewable energy research, Vol No.3, Issue No.1, pp.98-108, 2013 |
| 51 . |
SURESH PATIL.G.L, Dr.B.ANJANEYA PRASAD, Dr.DATTA MAHESWAR, FUEL INJRCTOR'S STRATERGIES OF Hcci ENGINE, INTERNATIONAL JOURNAL OF ENGINEERING RESEARCH AND APPLICATIONS, ISBN No.2248-9622, Vol No.3, Issue No.1, pp.1-8, IJERA, FEB, 2013 |
| 52 . |
SURESH PATIL.G.L, Dr.B.ANJANEYA PRASAD, Dr.DATTA MAHESWAR, Strategies of combustion control for HCCI engine, INTERNATIONAL JOURNAL OF EMERGING TECHNOLOGY AND ADVANCED ENGINEERING, ISBN No.2250-2459, Vol No.3, Issue No.1, IJETAE, JAN , 2013 |
| 53 . |
M.V.S Murali krishna, N Durga Prasad Rao, B.Anjaneya Prasad, P.V.K Murthy, Performance evaluation of rice bran oil in high grade low heat rejection diesel engine, FSJ Engineering Research, Vol No.1, Issue No.1, pp.1-6, 2012 |
| 54 . |
M.V.S Murali krishna, N Durga Prasad Rao, B.Anjaneya Prasad, P.V.K Murthy, Performance evaluation of rice bran oil in low grade low heat rejection diesel engine, International journal of engineering and science, Vol No.1, Issue No.5, pp.1-12, Research inventy, October, 2012 |
| 55 . |
Dr B.ANJANEYA PRASAD,G.S.CHAKRADHAR GOUD,G.SURESH PATIL,Dr D.MAHESWAE, AN INVESTIGATION OF VARIABLE VALVE TIMING APPLICATION FOR CONTROLLING THE HCCI COMBUSTION, IJERA, ISBN No.2248-9622, Vol No.I, IJERA, 2012 |
| 56 . |
Dr.B.Anjaneya Prasad,DrG.Prasanthi,R.Narayana Reddy,S.Rama Bhupal Reddy, Np MODEL - A HANDY TOOL FOR EVALUATION OF FMS ALTERNATIVES, INTERNATIONAL JOURNAL OF ENGINEERING RESEARCH AND INDUSTRIAL APPLICATIONS, ISBN No.ISSN 0973 -9424, Vol No.3, Issue No.I, IJERIA, 2010 |
| 57 . |
Dr B.Anjaneya Prasad, Dr G.Prasanthi, R.Narayana Reddy,S.Rama Bhupal Reddy, Np Model- A Handy Tool for Evaluation of FMS Alternatives, IJERIA, ISBN No.ISSN:0973-9424, Vol No.3, Issue No.1, IJERIA, FEBRUARY, 2010 |
| 58 . |
ANJANEYA PRASAD.B,SUDHEER B.P.K, MURTHY V.S.S, KALYANI K.RADHA, RAMJEE.E, NAGA PRASAD CH.S, K.V.K.REDDY &RAJAGOPAL.K, PERFORMANCE EVALUATION OF A LOW HEAT REJECTION CI ENGINE USING VEGETABLE OILS, INTERNATIONAL JOURNAS OF MULTIDISCIPLINARY RESEARCH AND ADVANCES IN ENGINEERING, ISBN No.pp 53-70, Vol No.I, Issue No.I, pp.54-70, IJMRAE, 2009 |
| 59 . |
Dr B.Anjaneya Prasad, Sudheer.B.P.K,Murthy V.S.S,Kalyani K.Radha,Ramjee.E,Nagaprasad Ch.S,KVK Reddy & Rajagopal.K, Performance evaluation of a low heat rejection CI engine using vegetable oils, IJMRAE, Vol No.1, Issue No.1, pp.53-70, IJMRAE, November, 2009 |
| 60 . |
Dr B.Anjaneya Prasad, M.Srinivasa Reddy,K.Hemachandra Reddy,D.R.Srinivasan, Effect of fuel injection strategies on emission in a DI diesel engine with central squish LIP piston bowl, The Technology World Quarterly journal, ISBN No.2180-1614, Vol No.5, Issue No.1, pp.270-274, The Technology World Quarterly journal, October-November, 2009 |
| 61 . |
M.T.NAIK,RAMYA YASHODA, B.ANJANEYA PRASAD,G.RANGA JANARDHAN & M.BASAVESWARA RAO, DESIGN AND THERMAL ANALYSIS OF HEAT EXCHANGER FOR ENERGY CONSERVATION, INTERNATIONAL JOURNAL OF APPLIED ENGINEERING RESEARCH , ISBN No.0973-4562, Vol No.5, Issue No.3, pp.538-544, RESEARCH INDIA PUBLICATIONS |
| National Journals |
| 1 . |
B.SRIDHAR BABU,A.KUMARASWAMY, B.ANJANEYA PRASAD, Non-destructive evaluation of elasto-plastic properties of Ti-6Al-4V alloy through Nanoindentation, National Conference on Micro and Nano Fabrication, pp.24-27, NDT, Delhi, Dec , 2012 |
| International Conference |
| 1 . |
A.Seshappa, K.Prudhvi Raj, B.Anjaneya Prasad, Mechanical Characterization and Machining of MgAZ91D/SiC/Al2 O3MMC by Squeeze Cast Method, 3rd International Congress on Advances in Material Sciences, IOP Conference Series, 2020 |
| 2 . |
J.Murali Naik, Dr B.Anjaneya Prasad, An Experimental Analysis on Performance and Emission Characteristics of Emulisifed Fuel and Nerium Biodiesel Blends in DI Diesel Engine ., International Conference on Mechanical, Mechatronics and Robotics Engineering, ISBN No.2348-4845, pp.371-379, ICMMRE, October, 2017 |
| 3 . |
Dr B.Anjaneya Prasad, Prasanna.P, Experimental comparison of the MIG and Friction Stir Welding Processes for AA6061 (Al Mg Si Cu) Aluminium Alloy, ICMME'13, pp.102-105, ICMME'13, April, 2013 |
| 4 . |
S.CHAKRADHAR GOUD,G.SURESH PATIL,Dr ANJANEYA PRASAD, Investigation of the alternative fuel suitability & Combustion performance of HCCI Engines, International Conference on Applications of Engineering & Management 2012, pp.41-48, ICAEM, 2012 |
| 5 . |
B.SRIDHAR BABU,A.KUMARASWAMY, B.ANJANEYA PRASAD, A Computational study of factors affecting the characterization of nanoindentation on Ti-6Al-4V alloy, 57 th CONGRESS OF THE INDIAN SOCIETY OF THEORETICAL AND APPLIED MECHANICS (An International Meet), THE INDIAN SOCIETY OF THEORETICAL AND APPLIED MECHANICS, 2012 |
| 6 . |
Dr B.Anjaneya Prasad, R.Meenakshi Reddy,N.Nallusamy,T.Hari Prasad,K.Hemachandra Reddy, SolarEnergy based Thermal Energy Storage System using Phase change Materials, ICAECT2010, pp.321-325, MIT Manipal, January, 2010 |
| 7 . |
B.VIJAYA KUMAR, Dr.T.MOHANDAS,Dr.G.MADHUSUDHAN REDDY,Dr.B.ANJANEYA PRASAD, A STUDY ON THE USE OF FRICTIONAL ENERGY FOR SURFACE MODIFICATION OF MILD STEEL WITH Aa6061 ALUMINIUM ALLOY OVER LAY, TOTAL ENGINEERING,ANALYSIS AND MANUFACTURING TECHNOLOGIES, TEAM-TECH, SEP, 2008 |
| 8 . |
N.SESHAIAH & B.ANJANEYA PRASAD, EFFICIENCY AND EXHAUST GAS ANALYSIS OF TWIN CYLINDER DIESEL ENGINE WHEN DIFFERENT PURE AND BLENDED FUELS USED, ICONICE, pp.410-415, ICONICE, 2007 |
| 9 . |
K.CHANDRA SEKHAR,M.SAI PRIYA,M.NAVEEN KUMAR,N.KRISHNA KANTH,ANIL KUMAR,B.ANJANEYA PRASAD & N.ESHWAR PRASAD, MANUFACTURING OF Cf-CNT-REINFORCED-EPOXY MATRIX HYBRID COMPOSITE BY HAND LAY UP TECHNIQUE, 21st INTERNATIONAL SYMPOSIUM ON PROCESSING AND FABRICATION OF ADVANCED MATERIALS, pp.31-36, IIT GOWAHATI,INDIA, DEC 10-13,2012 |
| National Conference |
| 1 . |
B.SridharBabu A.Kumaraswamy B.AnjaneyaPrasad, Effect of strain rate on mechanical properties of Haynes 242 alloy through Nanoindentation, National conference on materials characterisation, December, 2014 |
| 2 . |
Dr B.Anjaneya Prasad, Manikumari, D.Smitha,Ratnakar Pandu, Study of Mechanical behavior of Single -& MultiWalled Carbon Nanotubes-using Finite Element Method, NCAE-09, pp.159-169, MRCET, December, 2009 |
| 3 . |
Dr B.Anjaneya Prasad, NCS Reddy,Ratnakar Pandu,Ravinder Reddy, Modeling and analysis of CNT composites and their Thermal properties using Finite Element(FE)method, NCAE-09, pp.124-133, MRCET, December, 2009 |
| 4 . |
Dr B.Anjaneya Prasad, NCS Reddy,Ratnakar Pandu,Ravinder Reddy,S.Sapthagiri, Synthesis and characterization of Nano Ferroelectric Materials- A case study, NCAE-09, pp.179-184, MRCET, December, 2009 |
| 5 . |
B.SRIDHAR BABU,A.KUMARASWAMY, B.ANJANEYA PRASAD, Effect of strain- rate on mechanical properties of Ti-6Al-4V alloy through nanoindentation, 1st National Conference on Micro and Nano Fabrication, CENTRAL MANUFACTURING TECHNOLOGY INSTITUTE, BANGALORE, JAN 2013 |
| 6 . |
K.PRAHLADA RAO,G.RANGA JANARDHAN,B.ANJANEYA PRASAD,Dr.R.KOTAIAH, EVALUATION OF MANUFACTURABILITY USING FUZZY LOGIC, NATIONAL SEMINOR ON FUZZY TECHNIQUE APPLICATIONS IN MANUFACTURING AND ENGINEERING, pp.108-112, DEPARTMENT OF MECHANICAL ENGINEERING, ANDHRA UNIVERSITY COLLEGE OF ENGINEERING,VISAKHAPATNAM, MARCH-1998 |
| 7 . |
K.PRAHLADA RAO,G.RANGA JANARDHAN,B.ANJANEYA PRASAD,Dr.R.KOTAIAH, CASTOLEX: AN EXPERT SYSTEM FOR TOLERANCE SPECIFICATION OF METAL CASTINGS, NATIONAL SEMINOR ON FUZZY TECHNIQUE APPLICATIONS IN MANUFACTURING AND ENGINEERING, pp.37-42, DEPARTMENT OF MECHANICAL ENGINEERING, ANDHRA UNIVERSITY COLLEGE OF ENGINEERING,VISAKHAPATNAM, MARCH-1998 |
| 8 . |
K.PRAHLADA RAO,PRASAD.B.A,G.RANGA JANARDHAN,B.ANJANEYA PRASAD,Dr.R.KOTAIAH, DSEL: AN INTELLIGENT DATABASE SYSTEM FOR SELECTION OF DIE MATERIAL, SOFTWARE DEVELOPMENT IN MECHANICAL ENGINEERING, DEPARTMENT OF MECHANICAL ENGINEERING, DAYANANDA SAGAR COLLEGE OF ENGINEERING,BANGALORE, 1998 |
| 9 . |
B.ANJANEYA PRASAD,A.CHENNAKESAVA REDDY, REGRESSION ANALYSIS APPROACH FOR PREDICTING PROCESS OUTPUT VARIABLES IN WEDM, NATIONAL CONFERENCE ON COMPUTER APPLICATIONS IN MECHANICAL ENGINEERING, pp.92-96, JNTU COLLEGE OF ENGINEERING,ANANTAPUR, 2005 |
| 10 . |
K.PRAHLADA RAO,B.ANJANEYA PRASAD,K.RAJAGOPAL,R.AMEER BASHA, PREDICTION OF PERFORMANCE OF SSI USING DISCRIMANANT ANALYSIS BY MEASURING PRODUCTIVITY RATIOS, NATIONAL CONFERENCE ON COMPUTER APPLICATIONS IN MECHANICAL ENGINEERING, pp.186-189, JNTU COLLEGE OF ENGINEERING,ANANTAPUR, 2005 |
| 11 . |
Dr B.Anjaneya Prasad, NCS Reddy,Ratnakar Pandu,Ravinder Reddy, Modeling and analysis of CNT composites and their Thermal properties using Finite Element(FE |
| |
| Workshop |
| 11 . |
K.PRAHLADA RAO,B.ANJANEYA PRASAD,Dr.R.KOTAIAH,VENUMADHAV.D,RAVI.U.V.N.M, BEFAX: AN EXPERT SYSTEM FOR ANALYSIS OF BEARING FAILURE, INDUSTRIAL TRIBOLOGY, B L D E ASSOCIATION COLLEGE OF ENGG, BIJAPUR,KARNATAKA, 1998 |
| 11 . |
B.Anjaneya Prasad, K.Prahlada Rao,R.Kotaiah,Venumadhav,Ravi.U.V.N, BEFAX: AN EXPERT SYSTEM FOR ANALYSIS OF BEARING FAILURE, pp.1-5, ISTE workshop on INDUSTRIAL TRIBOLOGY |
Teaching
| THERMAL AND NUCLEAR POWER PLANTS in THERMAL ENGG M.TECH (PTPG) (2011) | | MECHANICAL TECHNOLOGY in MECHANICAL & EEE 3 (1992) | | DESIGN OF MACHINE MEMBERS -I in MECHANICAL 6 (1995) | | NON CONVENTIONAL SOURCES OF ENERGY in THERMAL ENGG M.TECH (2010) | | CRYOGENIC ENGINEERING in R&A/C M.TECH (1999) | | PRODUCTION TECHNOLOGY-I in MECHANICAL 5 (1992) | | AUTOMOBILE ENGINEERING in MECHANICAL 7 (1991) | | POWER PLANT ENGINEERING in MECHANICAL 8 (1990) | | ENGINEERING GRAPHICS in EEE,MECHANICAL 1 (1989) |
|
|
Adminstrative Positions Held
|
1. Vice - Chancellor
, Dr. YSR Architecture and Fine Arts University, Kadapa, A.P, 2023 - 2024
|
|
2. Chairman, Board of Studies (Mechanical Engineering of the University )
, JNTUH, 2018 - 2022
|
|
3. Director of Evaluation
, JNTUH, 2015 - 2017
|
|
4. DEPUTY WARDEN (BOYS HOSTEL)
, JNTUCEA
|
|
5. Officer In-Charge of SC/S T/BC BOOK BANK
, JNTUCEA
|
|
6. Co-ordinator SC/ST Cell
, JNTUCEA
|
|
7. Students Union Co-ordinator
, JNTUCEA
|
|
8. Chief Organizer for college day, cultural & sports day 2003 & 2004
, JNTUCEA
|
|
9. Teachers Association Secretary
, JNTUCEA
|
|
10. Hon’ Director, SW College Boys Hostel, Anantapur for 3 years
, Govt.of A.P
|
|
11. Co-Cordinated 3 week Training programme for unemployed Rural Youth (TPURY-2005)
, JNTUCEA
|
|
12. NSS Programme Co-ordinator and Officer- Incharge of PIU
, JNTUH
|
|
13. Vice Principal, JNTUH College of engineering, Manthani
, JNTUH
|
|
14. Chief Regional Co-ordinator,EAMCET-2012
, JNTUH
|
|
15. Chief Regional Co-ordinator,EAMCET-2013
, JNTUH
|
|
16. Co Convener, EAMCET-2014
, JNTUH
|
|
|
Project/Research Guidance
| Mr Anabathula Somaiah |
Characterizion of Glass Fiber Reinforced Polymer Composite and Optimization of Machining Parameters |
2025 |
|
| Ms RADHIKA M |
Development of Groundnut shell Derived Biocarbon Reinforced Ploylactic Acid Composites for 3d Printing Applications |
2025 |
|
| Mr. ANGADI SESHAPPA |
Investigation of MechanicalCharacterstics of AL7075 Metal Matrics Composites Using AL2O3 and SiC Nano Filler Materials |
2024 |
|
| Mr T. SUDHAKAR |
AN ANALYSIS ON IMPLEMENTATION OF SIX SIGMS IN POWER PLANT FOR IMPROVED PERFORMANCE |
2023 |
|
| P.PURUSHOTHAM NAIK |
KNOWLEDGE MANAGEMENT PRACTICES IN SELECT IT COMPANIES IN INDIA |
2019 |
|
| CHANDRA SEKHAR REDDY.N |
MODELING AND ANALYSIS OF CARBON NANOTUBE POLYMER COMPOSITES FOR MECHANICAL AND THERMAL PROPERTIES. |
2018 |
|
| KALAPALA PRASAD |
Performance optimization perspective of a gas turbine resolved and integrated component mode approach |
2018 |
|
| J.MURALI NAIK |
EXPERIMENTAL INVESTIGATIONS ON 4-STROKE DIESEL ENGINE USING METHYL ESTERS OF ALTERNATE FUELS |
2018 |
|
| Sreedhar Babu B |
INDENTATION SIZE EFFECTS ON ELASTO-PLASTIC DEFORMATION BEHAVIOR OF MATERIALS FOR AERO ENGINE COMPONENTS |
2015 |
|
| CHANDRA SEKHAR.K |
STRENGTHENING AND FRACTURE BEHAVIOUR OF CNT AND CARBON FIBRE REINFORCED , EPOXY-MATRIX HYBRID COMPOSITE |
2015 |
|
|
|
|
