Educational & Professional
Academic Qualifications
1.
B.Tech in Mechanical Engineering, Nagarjuna University with First (1991-92-0)
2.
M.E. in Mechanical Engineering, Indian Institute of Science, Bangalore with First (1993-94-0)
3.
Ph.D. in Mechanical Engineering, JNT University Hyderabad (2007-08-0)
Professional Experience
|
At JNTUH
| 1. |
Professor, JNT University Hyderabad (2012 - Till Date) |
| 2. |
Associate Professor, JNT University Hyderabad (2006 - 2012) |
| 3. |
Lecturer/Asst Prof, JNT University Hyderabad (1994 - 2006) |
|
|
|
|
Research
Research Projects
Weight Reduction of Automobiles through Electromagnetic Forming of Advanced and Ultra High Strength Steel Tailor Welded Blanks, funded by SERB, DST, Govt. of India - 43L (sanctioned in 2022 duration of 3 years)
Affect of Flank Wear on Surface Roughness in Turning of Nickel A286 Alloy, funded by TEQIP-III - 300000 (2019 - 2021)
Development of Sustainable Machining Technology using Advanced Coated Tools for Turning of Ti6Al4V/Iron based Nickel Super Alloy Components, funded by TEQIP-III - 823500 (sanctioned in 2021 duration of 1 years)
<MMString:LoadString id="insertbar/table" />
1 .
I H Shames, Engineering Mechanics, Pearson Education, 8177581236, 2006
Publications
| International Journals |
| 1 . |
M. Venkata Ramana, G. Krishna Mohana Rao, M. Dheeraj Reddy, B.V. Raja Ravi Kumar, P. Ravi Kumar, Optimization and impact of process parameters on Tool- Chip Interaction while turning of A286 Iron based Nickel superalloy, Int. J. Machining & Machinability of Materials, Vol No.24, pp.48-66, 2022 |
| 2 . |
B. Surekha, D. Hanumantha Rao, G. Krishna Mohana Rao, Pandu R. Vundavalli, M. B. Parappagoudar, Design and Development of fuzzy logic based expert system for forward and reverse mappings in resin bonded sand systems, Int J Syst Assur Eng Manag, Springer, September, 2021 |
| 3 . |
M. Venkata Ramana, G. Krishna Mohana Rao, Bidya Sagar, Ravi Kumar Panthangi, B.V. Raja Ravi Kumar, Optimization of Surface Roughness and Tool wear in sustainable Dry Turning of Iron based Nickel A286 using Taguchi’s method, Cleaner Engineering and Technology, Vol No.2, pp.1-15, Elsevier, 2021 |
| 4 . |
M.Venkata Ramana, G. Krishna Mohana Rao, D. Hanumantha Rao, BVR Ravi Kumar, Prediction of optimum process parameters in turning of Ti6Al4V Alloy under various cooling strategies using soft computing tool, AIP Conference Proceedings, Vol No.2317, pp.20004-20004, February, 2021 |
| 5 . |
Bhiksha Gugulothu, G. Krishna Mohana Rao, Minyahil Bezabih, Grey relational analysis for multi-response optimization of process parameters in green electrical discharge machining of Ti – 6Al – 4V alloy, MaterialsToday: Proceedings, Vol No.46, pp.89-98, Elsevier, 2021 |
| 6 . |
Bhiksha Gugulothu, G. Krishna Mohana Rao, D. Hanumantha Rao, Desta Kalbessa Kumsa, Minyahil Bezabih Kassa, Experimental Results on EDM of Ti-6Al-4V in drinking water with Graphite Powder concentration, 2nd International Conference on Manufacturing Material Science and Engineering, Materials Today: Proceedings, Vol No.46, pp.234-242, Elsevier, 2021 |
| 7 . |
M. Venkata Ramana, G. Krishna Mohana Rao, G. Prashanth, Bidya Sagar, P. Ravi Kumar, B.V. Raja Ravi Kumar, Effect of machining conditions on shear angle in turning of A286 iron based nickel super alloy, ICMPC, MaterialsToday: Proceedings, Vol No.44, pp.2319-2324, Elsevier, 2021 |
| 8 . |
Bhiksha Gugulothu, G. Krishna Mohana Rao, D. Hanumantha Rao, Influence of drinking water and graphite powder concentration on electrical discharge machining of Ti – 6Al – 4V alloy, MaterialsToday Proceedings, Vol No.27, pp.294-300, Elsevier, 2020 |
| 9 . |
B.V.S.Rao,G. Chandra Mohan Reddy,G. Krishna Mohana Rao, PVR.Ravindra Reddy, Numerical Analysis On The Effect Of Various Parameters On Fracture Limit For Deep Drawn Cups, Materials Today:, Vol No.5 , pp.1387-1400, Elsevier, January, 2018 |
| 10 . |
Padmini Rapeti, Vamsi Krishna Pasam, Krishna Mohana Rao Gurram, Rukmini Srikant Revuru, Performance evaluation of vegetable oil based nano cutting fluids in machining using Grey Relational Analysis-A step towards sustainable manufacturing, Journal of Cleaner Production, Vol No.172, pp.2862-2875, Elsevier, 2018 |
| 11 . |
B.V.S Rao, G. Krishna Mohana Rao, G. Chandra Mohan Reddy, Experimental Investigation of Major and Minor Strains in different regions of Deep Drawn Cups, International Journal of Mechanical & Production Engineering Research & Development(IJMPERD), ISBN No.2249-8001, Vol No.8, Issue No.3, pp.441-448, June, 2018 |
| 12 . |
A. Lakshmi narayana, G. Krishna Mohana Rao, R. Vijaya Kumar, Thermal Buckling analysis of Laminated Composite Plate with Square/Rectangular, Elliptical/Circular Cutout, MaterialsToday Proceedings, Vol No.5, pp.5354-5363, Elsevier, 2018 |
| 13 . |
A. Lakshmi narayana, G. Krishna Mohana Rao, R. Vijaya Kumar, Effect of Volume Fraction on the Thermal Buckling analysis of Laminated Composite Plate with Square/Rectangular Cutout, MaterialsToday Proceedings, Vol No.5, pp.5819-5829, Elsevier, 2018 |
| 14 . |
M. Venkata Ramana, G. Krishna Mohana Rao, D. Hanumantha Rao, Multi Objective optimization of process parameters in turning of Ti – 6Al – 4V alloy, MaterialsToday: Proceedings, Vol No.5, pp.18966-18974, Elsevier, 2018 |
| 15 . |
A. Lakshmi narayana, G. Krishna Mohana Rao, R. Vijaya Kumar, Thermal Buckling analysis of Laminated Composite Plate with Square/Rectangular Cutout, MaterialsToday Proceedings, pp.1-13, Elsevier, 2017 |
| 16 . |
A. Lakshmi narayana, G. Krishna Mohana Rao, R. Vijaya Kumar, Effect of Volume Fraction on the Thermal Buckling analysis of Laminated Composite Plate with Cutout, International Conference of Material Processing and Characterisation (ICMPC-2017), MaterialsToday Proceedings, pp.1-12, Elsevier, 2017 |
| 17 . |
Anjaneyulu J, Venkata Rao G, Krishna Mohana Rao G, Dimensional Analysis and Buckingham Pi Theorem Applications in Mechanisms, International Journal of Research in Engineering, Science and Technologies, ISBN No.2454-5392, Vol No.2, Issue No.8, pp.1-6, Deepam Publications, March, 2017 |
| 18 . |
B.V.S Rao, G. Krishna Mohana Rao, G. Chandra Mohan Reddy, P.V.R Ravindra Reddy, Numerical Analysis on the Effect of Friction Coefficient on Wrinkling in Deep Drawing with Linearly Variable Blank Holding Force, Institute of Research and Development, India, ISBN No.2321-5747, Vol No.4, Issue No.4, pp.9-15, 2016 |
| 19 . |
Ishrat M Mirjana, G.Krishna Mohana Rao, Shoeb Ur Rahman, Zaki Ahmad, Fabrication and Microstructural Study of Functionally graded material disc of SS316/IN625, Materials Today, Vol No.3, Issue No.10, pp.4236-4241, Elsevier, 2016 |
| 20 . |
Padmini R, P Vamsi Krishna, G. Krishna Mohana Rao, Effectiveness of vegetable oil based nanofluids as potential cutting fluids in turning AISI 1040 steel, Tribology International , Vol No.94, pp.490-501, Elsevier, 2016 |
| 21 . |
P.Ravi Kumar, Dr.G.Krishna Mohana Rao, Influence Of Cutting Speed And Type Of Damping Inserts On Chip Thickness And Width In End Milling Process, CMR Journal of Engineering and Technology, ISBN No.2455-4677, Vol No.1, Issue No.1, January, 2016 |
| 22 . |
M. Venkata Ramana, G. Krishna Mohan Rao and D. Hanumantha Rao, Experimental investigations on tool wear in turning of Ti-6Al-4V alloy under different machining environmental conditions, International Journal of Manufacturing Research, 2016 |
| 23 . |
B V S Rao, G Chandra Mohan Reddy, G Krishna Mohan Rao, P V R Ravindra Reddy, Influence of Drawing Ratio on Thickness Variation along the Walls of Deept Drawn Cups, Journal of Manufacturing Engineering, Vol No.11, Issue No.2, pp.86-93, SME, June, 2016 |
| 24 . |
B V S Rao, G Chandra Mohan Reddy, G Krishna Mohan Rao, P V R Ravindra Reddy, Numerical Studies on the Effect of Various Parameters on Wrinkling in Deep Drawing of Cylindrical Cups, Manufacturing Technology Today (MTT),, Vol No.16, Issue No.7, pp.5-16, July, 2016 |
| 25 . |
B.V.S.Rao, G.Chandra Mohan Reddy, G.Krishna Mohan Rao, P.V.R.Ravindra Reddy, Numerical Analysis on the Effect of Friction Coefficient on Wrinkling in Deep Drawing with Linearly Variable Blank Holding Force, International Journal on Mechanical Engineering and Robotics (IJMER), ISBN No.2321-5747, Vol No.4, Issue No.3, 2016 |
| 26 . |
R Padmini, P Vamsi Krishna and G. Krishna Mohana Rao, Experimental Evaluation of Nano-Molybdenum Disulphide and Nano-Boric acid suspensions in vegetable oil as prospective cutting fluids during turning of AISI 1040 steel, Journal of Engineering Tribology, Vol No.230, Issue No.5, pp.493-505, IMechE, 2016 |
| 27 . |
Padmini R, P Vamsi Krishna, G. Krishna Mohana Rao, Performance assessment of micro and nano solid lubricant suspensions in vegetable oils during machining, Journal of Engineering Manufacture, Vol No.229, Issue No.12, pp.2196-2204, Institution of Mechanical Engineers, December, 2015 |
| 28 . |
R Padmini, G. Krishna Mohana Rao, P Vamsi Krishna, Experimental Evaluation of Nano-Molybdenum Disulphide and Nano-Boric acid suspensions in vegetable oil as prospective cutting fluids during turning of AISI 1040 steel, Journal of Engineering Tribology, pp.1-13, IMechE, July, 2015 |
| 29 . |
Ishrat M Mirjana, G.Krishna Mohana Rao, G.Sailaja, S.Irfan Sadak, Mathematical Formulation and Simulation of Functionally Graded Tube, International Journal on Mechanical Engineering and Robotics, ISBN No.2231-5747, Vol No.3, Issue No.1, pp.6-10, IRD India, January, 2015 |
| 30 . |
Afroz Meher, P.Ravinder Reddy, G.Krishna Mohana Rao, Experimental Analysis of Orthotropic Cylindrical Shell Subjected to Internal Pressure, International Journal on Mechanical Engineering and Robotics, ISBN No.2231-5747, Vol No.3, Issue No.1, pp.11-14, IRD India, January, 2015 |
| 31 . |
Padmini R, P Vamsi Krishna, G. Krishna Mohana Rao, RR Srikant, Effect of Vegetable Oil Based Nanofluids on Machining Performance: An Experimental Investigation, International Journal of Aerospace and Mechanical Engineering , Vol No.2, Issue No.12, World Academy of Science, Engineering and Technology , 2015 |
| 32 . |
Bhiksha Gugulothu, D.Hanumantha Rao, G.Krishna Mohana Rao, Optimization of EDM Process parameters and Graphite powder concentration on electrical discharge machining of Ti-6Al-4V alloy using Taguchi method, International Journal of Advances in Production and Mechanical Engineering, ISBN No.2394-6202, Vol No.1, Issue No.5, pp.31-44, August, 2015 |
| 33 . |
Bhiksha Gugulothu, D.Hanumantha Rao, G.Krishna Mohana Rao, Influence of Parameters and Dielectric Fluids on Electro Discharge Machining of Titanium Alloy, International Conference on Innovative Trends in Mechanical, Material, Manufacturing, Automobile and Aeronautical Engineering (ITMAAE-2015), ISBN No.453-879-870-021-9, pp.480-490, Bapatla Engineering College, Guntur, Andhra Pradesh and “Krishi Sanskriti’’, New Delhi, India, 2015 |
| 34 . |
B V S Rao, G Chandra Mohan Reddy, G Krishna Mohan Rao, and P V R Ravindra Reddy, Determination of blank size for non-axisymmetric non-standard deep drawn cups, Manufacturing Technology Today (MTT), ISBN No.0972-7396, Vol No.14, Issue No.7, pp.3-14, July, 2015 |
| 35 . |
J.Anjaneyulu, G. Venkata Rao, G. Krishna Mohana Rao, Theoretical and experimental dynamic analysis of high speed mechanism of a switch gear, International Journal of Applied Engineering Research (IJAER), Vol No.10, Issue No.2, pp.5271-5283, Research India Publications (RI publications), 2015 |
| 36 . |
Rajendra.M, G. Krishna Mohana Rao, EFECT OF SILICON CARBIDE(SiC) ABRASIVE PARTICLES MIXED IN DIE ELECTRIC FLUID ON THE PERFORMANCE OF EDM BY REGRESSION ANALYSIS, International Journal of Engineering Research and Development, ISBN No.2278-800X, Vol No.11, Issue No.7, pp.35-42, July, 2015 |
| 37 . |
Srinivasulu P, G Krishna Mohana Rao, EXPERIMENTAL INVESTIGATION OF MECHANICAL PROPERTIES OF FRICTION STIR WELDED AA 6082 ALUMINUM ALLOY BUTT JOINTS, International Journal of Science, Technology & Management, ISBN No.2394-1537, Vol No.4, Issue No.1, pp.815-822, March, 2015 |
| 38 . |
Srinivasulu P, G Krishna Mohana Rao, OPTIMIZATION OF PROCESS PARAMETERS OF FRICTION STIR WELDED AA6082 ALUMINIUM ALLOYS, International Journal of Advanced Technology in Engineering and Science, ISBN No.2348 - 7550, Vol No.3, Issue No.1, pp.942-952, March, 2015 |
| 39 . |
Srinivasulu P, G Krishna Mohana Rao, EVALUATION OF BENDING STRENGTH OF FRICTION STIR WELDED AA 6082 ALUMINUM ALLOY BUTT JOINTS, International Journal of Advance Research In Science And Engineering, ISBN No.2319-8354(E), Vol No.4, Issue No.1, pp.1262-1270, March, 2015 |
| 40 . |
Srinivasulu P, G Krishna Mohana Rao, EFFECT OF PROCESS PARAMETERS ON FRICTION STIR WELDED AA 6061 ALUMINUM ALLOY BUTT JOINTS., ISBN No.2319-8354(E), Vol No.4, Issue No.1, pp.503-519, March, 2015 |
| 41 . |
S.R. Chandramouli, G. Krishna Mohana Rao, End Effector Mounted Robot Arm Kinetics for Redundant Rigid and Flexible Links Manipulators, International Journal of Emerging Technology and Advanced Engineering, ISBN No.2250-2459, Vol No.5, Issue No.8, pp.110-115, August, 2015 |
| 42 . |
M.Venkataramana, G.Krishna Mohana Rao, D. Hanumantha Rao, Optimization and Investigation into the Effect of Cutting Conditions on Surface Roughness in Turning of Ti-6Al-4V Alloy under Different Machining Environments, Journal of Manufacturing Science and Production, Vol No.15, Issue No.2, pp.197-204, 2015 |
| 43 . |
Mojtaba Gholamian, G.Krishna Mohana Rao, Panitapu Bhramara, Flow Pattern and Efficiency Changes of Squirrel Cage Fans due to Inlet Diffuser Diameter Changes - Suing CFD Method and Experimental Validation, Applied MEchanics and Materials, Vol No.446-447, pp.626-630, Trans Tech Publications, Switzerland, 2014 |
| 44 . |
Mojtaba Gholamian, G.Krishna Mohana Rao, Panitapu Bhramara, Effect of Axial Gap between Diffuser Inlet and Impeller on Efficiency and Flow Pattern of Centrifugal Fans, Applied MEchanics and Materials, Vol No.446-447, pp.621-625, Trans Tech Publications, Switzerland, 2014 |
| 45 . |
A.Lakshminarayana, G.Krishna Mohana Rao, R.Vijaya Kumar, Buckling analysis of rectangular composite plates with rectangular cutout subjected to linearly varying in-plane loading using FEM, Sadhana, 2014 |
| 46 . |
M.Venkata Ramana, G.Krishna Mohana Rao, D. Hanumantha Rao, Chip Morphology in Turning of Ti-6Al-4V alloy under different Machining conditions, Journal of Production Engineering, Vol No.17, Issue No.1, pp.27-32, 2014 |
| 47 . |
M.Venkata Ramana, G.Krishna Mohana Rao, D. Hanumantha Rao, Optimization and effect of process parameters on tool wear in turning of Titanium alloy under different machining conditions, Int. J of Materials, Mechanics and Manufacturing , Vol No.2, Issue No.4, pp.272-277, 2014 |
| 48 . |
P.Ravi Kumar, Dr.G.Krishna Mohana Rao, Theoretical and Experimental analysis of End Milling Process with Multiple finger inserted cutters, International Journal of Mechanical and Mechatronics Engineering, Vol No.1, Issue No.5, May, 2014 |
| 49 . |
P.Ravi Kumar, Dr.G.Krishna Mohana Rao, Optimization of Metal removal rate in End Milling using Taguchi method and ANOVA, 3rd International Conference on Recent trends in Engineering & technology (ICRTET 2014),Organized by SNJB's Late Sau. K. B. Jain College of Engineering, Chandwad (Nashik), MH, India, ISBN No.978-93-5107-222-5, Elseveir Science & Technology , March, 2014 |
| 50 . |
Rajendra.M, G. Krishna Mohana Rao, EXPERIMENTAL EVALUATION OF PERFORMANCE OF ELECTRICAL DISCHARGE MACHINING OF D3 DIE STEEL WITH Al2O3 ABRASIVE MIXEDDIELECTRIC MATERIAL BY USING DESIGN OF EXPERIMENTS., International Journal of Research in Engineering and Technology, ISBN No.2321-7308, Vol No.3, Issue No.1, pp.599-608, January, 2014 |
| 51 . |
B. Surekha, D. Hanumantha Rao, G. Krishna Mohana Rao, Pandu R. Vundavilli , Design and development of knowledge-base scheme for chromite-based resin bonded sand core system, Procedia Material Science, Vol No.6, pp.919-925, Elsevier, September, 2014 |
| 52 . |
Mojtaba Gholamian, G.Krishna Mohana Rao, Panitapu Bhramara, Numerical Investigation on effect of inlet nozzle size on efficiency and flow pattern in squirrel cage fan, Journal of Power and Energy, Vol No.227, Issue No.8, pp.896-907, sage, 2013 |
| 53 . |
Mojtaba Gholamian, G.Krishna Mohana Rao, Panitapu Bhramara, Effect of Axial gap between inlet nozzle and impeller on efficiency and flow pattern in centrifugal fans, numerical and experimental analysis, Case Studies in Thermal Engineering, Vol No.1, pp.26-37, Elsevier, 2013 |
| 54 . |
G.Krishna Mohana Rao, Vijay Mohan, Experimental Analysis of Passive Damping Technique on Conventional Radial Drilling Machine Tool Bed Using Composite Materials, International Journal of Mining, Metallurgy & Mechanical Engineering, ISBN No.2320-4060, Vol No.1, Issue No.2, 2013 |
| 55 . |
G.Krishna Mohana Rao, Chandra Mouli, Overview of Kinematics Design of Multi Section Planar Continuum Robot, International Journal of Engineering Research and Technology, Vol No.2, Issue No.1, January, 2013 |
| 56 . |
G.Krishna Mohana Rao, B V S Rao, G Chandra Mohan Reddy, Low cost Knowledge base system for design of deep drawing die set, International Journal of MEchanical Engineering and Robotics REsearch, ISBN No.2278-0149, Vol No.2, Issue No.1, January, 2013 |
| 57 . |
Tarak Nath De, S Sundararajan, G.Krishna Mohana Rao, Optimum Size Selection for Spring Loaded Detachable Canister Launch Vehicle Interface for Multistage Long Range System, International Journal of engineering Trends and Technology, ISBN No.2231-5381, Vol No.5, Issue No.1, pp.1-9, November, 2013 |
| 58 . |
R Padmini, P Vamsi Krishna , G. Krishna Mohana Rao and R R Srikant, 1. Experimental investigation on the application of vegetable oil based nanofluids in machining, Journal of Mechanical Engineering, Vol No.54, Issue No.1, pp.121376-121382, 2013 |
| 59 . |
Krishna Mohana Rao Gurram, R. Padmini, P. Vamsi Krishna, 2. Application of nano cutting fluids to machining: An experimental investigation, J Nanomed Nanotechnol, Vol No.4, Issue No.6, 2013 |
| 60 . |
A.Lakshmi narayana ,Krishnamohana rao and Vijaya Kumar.R, FEM buckling analysis of quasi-isotropic symmetrically laminated rectangular composite plates with a square/rectangular cut, Journal of Mechanical Science and Technology, Vol No.27, Issue No.5, pp.1427-1435, 2013 |
| 61 . |
A.Lakshmi narayana ,Krishnamohana rao and Vijaya Kumar.R, Effect of location of cutout and plate aspect ratio on buckling strength of rectangular composite plate with square/rectangular cutout subjected to various linearly varying in-plane loading using FEM, International Journal of Mechanics, Vol No.7, Issue No.4, pp.508-517, 2013 |
| 62 . |
Afroz Meher, P.Ravinder Reddy, G.Krishna Mohana Rao, Delamination of an orthotropic cylinder shell with helically wound fiber reinforcement when subjected to axial compression, International Journal of Advanced Trends in Computer Science and Engineering , Vol No.2, Issue No.1, pp.135-138, 2013 |
| 63 . |
B. Surekha, D. Hanumantha Rao, G. Krishna Mohana Rao, Pandu R. Vundavilli and Mahesh B. Parappagoudar, Application of response surface methodology for modeling the properties of chromite-based resin bonded sand cores, International Journal of Mechanics, Vol No. 7, Issue No.4, pp.443-458, October, 2013 |
| 64 . |
G.Krishna Mohana Rao, B V S Rao, G Chandra Mohan Reddy, Parametric Studies on Wrinkling and Fracture Limits in Deep Drawing of Cylindrical Cup, International Journal of Emerging Technology and Advanced Engineering, ISBN No.2250-2459, Vol No.2, Issue No.6, June, 2012 |
| 65 . |
Ishrat M. Mirzana, G. Krishna Mohana Rao & G.Rama Murthy, Rapid Calculation Procedure for the Analysis of a Functionally Graded Tube Subjected to Internal Pressure Under Plane Strain Condition, Int. J. for Computational Methods in Engg. Science and Mechanics, ISBN No.1550-2287, Issue No.14, pp.24-31, Taylor & Francis, 2013 |
| 66 . |
P.Ravi Kumar, G.Krishna Mohana Rao, Optimization of Surface Roughness in Damper Inserted End Milling Using Taguchi Method and ANOVA, J. Manuf. Sci. Prod., Vol No.12, Issue No.3-4, pp.147-154, De Gruyter, 2012 |
| 67 . |
B. V. S. Rao, G. Chandra Mohan Reddy, G. Krishna Mohana Rao, P. Ranadheer & P. V. R. Ravindra Reddy, Low Cost Knowledge Base System for Design of Deep Drawing Die Set, Int. J. Mech. eng. & Rob. Res., ISBN No.2278-0149, Vol No.2, Issue No.1, pp.246-253, IJMERR, 2013 |
| 68 . |
G.Krishna Mohana Rao, G Ranga Janardhana & M srinivasa Rao, Optimal Machining Parameters on Die Sinking EDM Using Taguchi Technique on Aluminium Alloy(HE-20), Int J of Manuf Sci and Tech, Vol No.1, Issue No.2, pp.103-116, Serials Publications, 2007 |
| 69 . |
S Satyanarayana, G Krishna Mohana Rao, Rami Reddy p & M Komariah, Characterization of Electric Discharge Machined Surface of Inconel718, Int J of Manuf Sci and Tech, Vol No.1, Issue No.2, pp.81-102, Serials Publications, 2007 |
| 70 . |
M Ramalinga Reddy, P Ravi Kumar & G Krishna Mohana Rao, Effect of Feed Rate on the Generation of Surface Roughness in Turning, Int J of engg and Tech, ISBN No.0975-5462, Vol No.3, Issue No.11, pp.8099-8105, 2011 |
| 71 . |
M Ramalinga Reddy, Late V S R Murthy, P Ravi Kumar & G Krishna Mohana Rao, Comparitive Study of Theoritical and Practical Surface Roughness Profiles Produced in Turning, Int J of engg and Tech, ISBN No.0976-3945, Vol No.3, Issue No.1, pp.89-99, IJAET, 2012 |
| 72 . |
G.Krishna Mohana Rao, G Ranga Janardhana, D Hanumantha Rao & M srinivasa Rao, Development of hybrid model and optimization of surface roughness in electric discharge machining using artificial neural networks and genetic algorithm, Journal of Materials Processing Technology, ISBN No.0924-0136, Vol No.209, pp.1512-1520, Elsevier, 2009 |
| 73 . |
P Prasanna, B subba Rao & G Krishna Mohana Rao, Experimental and Numerical Evaluation of Friction Stir Welds of AA6061-T6 Aluminium Alloy, ARPN Journal of Engineering and Applied Sciences, ISBN No.1819-6608, Vol No.5, Issue No.6, pp.1-17, ARPN, 2010 |
| 74 . |
G.Krishna Mohana Rao & D Hanumantha Rao , Hybrid Modelling and Optimization of Hardness of Surface Produced by electric discharge machining using artificial neural networks and genetic algorithm, ARPN Journal of Engineering and Applied Sciences, ISBN No.1819-6608, Vol No.5, Issue No.5, pp.73-82, ARPN, 2010 |
| 75 . |
P Prasanna, B subba Rao & G Krishna Mohana Rao, Finite Element Modeling for maximum temperature in friction stir welding and its validation, Int J Adv Manuf Technol, Vol No.51, pp.925-933, Springer Verilog, 2010 |
| 76 . |
M Venkata Ramana, K srinivasulu & G Krishna Mohana Rao, Performance evaluation and selection of optimal parameters in turning of Ti-6Al-4V alloy under different cooling conditions, Int J of Innov Tech & Creative eng, ISBN No.2045-8711, Vol No.1, Issue No.5, pp.10-21, 2011 |
| 77 . |
B. V. S. Rao, G. Chandra Mohan Reddy, G. Krishna Mohana Rao, P. Ranadheer & P. V. R. Ravindra Reddy, Optimization of Blank Holding force in deep drawing of cylindrical cups using taguchi approach, Int J of Engg and Innov Tech, ISBN No.2277-3754, Vol No.2, Issue No.3-4, pp.143-148, 2012 |
| 78 . |
B.Surekha, D Hanumantha Rao, G Krishna Mohana Rao, Pandu R Vundavalli & M B Parappagoudar, Modeling and analysis of resin bonded sand mould system using design of experiments and central composite design, J. Manuf. Sci. Prod., Vol No.12, pp.31-50, De Gruyter, 2012 |
| 79 . |
M Venkata Ramana, A Venkatavishnu, G Krishna Mohana Rao & D Hanumantha Rao, Experimental Investigations, Optimisation of process parameters and mathematical modeling in turning of titanium alloy under different lubricant conditions, IOSR J Of engg, ISBN No.2250-3021, Vol No.2, Issue No.1, pp.86-101, IOSR, 2012 |
| 80 . |
A Lakshminarayana, R Vijaya Kumar & G Krishna Mohana rao, Buckling Analysis of quasi-isotropic symmetrically laminated rectangular composite plates with an elliptical/circular cutout subjected to linearly varying in-plane loading using FEM, Int J of Mechanics, Vol No.6, Issue No.1, pp.1-8, 2012 |
| 81 . |
Ratnakar Pandu, P Ravinder Reddy, AVSSKS Guptha & G K M Rao, Simulation studies on Dynamic response of single-walled carbon nano tubes under bending-buckling loads- an FEA approach, Int J of Nanotechnology and Applications, ISBN No.0973-631, Vol No.3, Issue No.2, pp.49-60, Research India Publications, 2009 |
| 82 . |
Afroz Meher, P RavinderReddy, G K Mohana rao & Ratnakar Pandu, Theoritical modeling and analysis of orthotropic cylindrical shells of different composites subjected to different loading conditions, Int J of Materials Science, ISBN No.0973-4589, Vol No.5, Issue No.1, pp.91-104, Research India Publications, 2010 |
| 83 . |
M Srinivasa Rao, K V Sharma, A Seshu Kumar & G Krishna Mohana Rao, Buffer Stocks in Kanban controlled (Traditional) unsaturated multi-stage production system, Journal of Engg and Applied Science, ISBN No.1819-6608, Vol No.3, Issue No.6, pp.51-58, ARPN, 2008 |
| 84 . |
G.Krishna Mohana Rao, G Ranga Janardhana, D Hanumantha Rao & M srinivasa Rao, Development of hybrid model and optimization of Metal removal Rate in electric discharge machining using artificial neural networks and genetic algorithm, Journal of Engg and Applied Science, ISBN No.1819-6608, Vol No.3, Issue No.11, pp.19-30, ARPN, 2008 |
| 85 . |
Thahar Ali Syed, Ratnakar Pandu, Mohana Rao G K, Ravinder Reddy P & Eswara Prasad K, Design and Development of ZNO Nano tube based Photo- Electrodes for Dye-Sensitized Solar cells, Int J of Scientific and Research Publications, ISBN No.2250-3153, Vol No.2, Issue No.5, pp.1, 2012 |
| 86 . |
Taraknath De, S Sundarrajan & G Krishna Mohana Rao, Configuration design of spring loaded detachable canister launch vehicle interface for multistage long launch vehicle, Journal of engg, ISBN No.2250-3021, Vol No.2, Issue No.6, pp.1328-1333, IOSR, 2012 |
| 87 . |
B. Surekha, D. Hanumantha Rao, G. Krishna Mohana Rao, Pandu R. Vundavalli, M.B. Parappagoudar, Prediction of Resin Baonded Sand Core Properties Using Fuzzy Logic, Journal of Intelligent and Fuzzy Systems, Vol No.25, pp.595-604, IOS Press, 2013 |
| 88 . |
Srinivasulu P, G Krishna Mohana Rao, FRICTION STIR WELDING PROCESS A NOVEL JOINING TECHNIQUE, International Journal on Mechanical Engineering and Robotics |
| National Journals |
| 1 . |
Mohd Yousuf Ali, Dr. G. Krishna Mohana Rao, Dr. B. Anjaneya Prasad, Impact of Fused Deposition Modeling process parameters and heat treatment on mechanical characteristics and product quality: A Review, ARAI Journal of Mobility Technology, ISBN No.2583-3707, Vol No.3, pp.883-912, December, 2023 |
| 2 . |
Bhiksha Gugulothu, D.Hanumantha Rao, G.Krishna Mohana Rao, Influence of parameters and dielectric fluids on electric discharge machining of Titanium Alloy, Journal of Material Science and Mechanical Engineering, ISBN No.2393-9095, Vol No.2, Issue No.5, pp.409-414, April, 2015 |
| 3 . |
M Venkata Ramana, G Krishna Mohana Rao & D Hanumantha Rao, Experimental Investigations and Selection of optimal cutting conditions in turning of Ti-6Al-4V alloy with different cutting fluids by minimum quantity lubrication (MQL) methodology, J on Mechanical Engineering, Vol No.2, Issue No.1, pp.44-51, i-Manager, 2011 |
| 4 . |
M.Venkataramana, G.Krishna Mohana Rao, D. Hanumantha Rao, Optimization of Process Parameters using Taguchi and Simulated Annealing Methods for Surface Roughness in Turning of Ti-6Al-4V alloy, i-Manager’s Journal on Mechanical Engineering, Vol No.4, Issue No.4, pp.29-37 |
| International Conference |
| 1 . |
Bhiksha Gugulothu, G. Krishna Mohana Rao, D. Hanumantha Rao, Experimental Results on EDM in drinking water and Graphite Powder concentration of Ti – 6Al – 4V, International Conference on Advanced Light- Weight Materials & Structures (ICALMS-2020), ISBN No.978-81-92-7051-25, 2020 |
| 2 . |
Ishrat M Mirjana, G.Krishna Mohana Rao, S.Irfan Sadak, Kaushal Dasari, BEhavioural Study of a functionally graded material disc subjected to pressure conditions, Int Conf on Technological Innovations in Mechanical Engineering(TIME-2016), ISBN No.978-93-81692-07-1, pp.89-94, 2016 |
| 3 . |
P.Ravi Kumar,Dr.G.Krishna Mohana Rao, D.Ajay, Optimization of Metal removal rate in Machining of cast iron and copper alloy by End Milling, International Conference on Technological Innovations in Mechanical Engineering (TIME-2016), ISBN No.978-93-81692-07-1, Chaitanya Bharathi Institute of Technology, Hyderabad, India, February, 2016 |
| 4 . |
P.Ravi Kumar, Dr.G.Krishna Mohana Rao, Theoretical and Experimental analysis of End Milling Process with Multiple finger inserted cutters, 18th International Conference on Automotive and Mechanical Engineering, World academy of Science ,Engineering and Technology(WASET) at Tokyo, Japan, May, 2016 |
| 5 . |
Vijaya Kumar.R, A.Lakshmi narayana ,Krishnamohana rao G, Stress Analysis For Strength Prediction Of Laminated Composite Plates With Rectangular/Square Cutout Using Finite Element Method, SAMPE Conference Proceedings. Long Beach, CA, May 23-26, 2016, Society for the Advancement of Material and Process Engineering, 2016 |
| 6 . |
A.Lakshmi narayana ,Krishnamohana rao and Vijaya Kumar.R, Progressive Failure Analysis Of Laminated Composite Plates With Elliptical Or Circular Cutout Using Finite Element Method, International conference on advance materials and manufacturing applications, Bangalore, India, Vol No.149, Issue No.1, IOP Conference series:Materials Science and Engineering, 2016 |
| 7 . |
B V S Rao, Dr. G Chandra Mohan Reddy, G Krishna Mohan Rao, P V R Ravindra Reddy, Numerical Analysis on the Effect of Friction Coefficient on Wrinkling in Deep Drawing with Linearly Variable Blank Holding Force, International Conference on Technological Innovations in Mechanical Engineering (TIME-2016), ISBN No.97-93-1692-07-1, February, 2016 |
| 8 . |
B V S Rao, G Chandra Mohan Reddy, G Krishna Mohan Rao, and P V R Ravindra Reddy, Numerical Analysis on The effect of Various Parameters on Fracture Limit for Deep Drawn Cups, International Conference on Processing of Materials, Minerals and Energy, PMME 2016, Materials Today Proceedings, ScienceDirect, Elsevier, 2016 |
| 9 . |
J. Anjaneyulu, G. Krishna Mohana Rao, G. Venkata Rao, Stress analysis of a circuit breaker switchgear mechanism by using multi body dynamics, 28th International Conference on CAD/CAM, Robotics and Factories of Future (28 CARS and FOF 2016), pp.183-193, Springer publications, College of Engineering and Management, Kolaghat, West Bengal, January, 2016 |
| 10 . |
Bhiksha Gugulothu, D.Hanumantha Rao, G.Krishna Mohana Rao, Optimization of EDM Process Parameters and Graphite Powder Concentration on Electrical Discharge Machining of Ti-6Al-4V using Taguchi Method, 9th International Conference on Production, Mechanical and Automobile Engineering (ICPMAE- 2015), ISBN No.978-93-85225-43-7, pp.12-25, Technical Research Organization India (TROI), August, 2015 |
| 11 . |
Afroz Meher, P.Ravinder Reddy, G.Krishna Mohana Rao, Experimental Investigation and FE analysis of Mechanical Properties of Carbon Fiber Reinforced Epoxy Composites, 4th International Conference on Materials Processing and Characterization, ICMPC2015, 2015 |
| 12 . |
Rajendra.M, G. Krishna Mohana Rao, OPTIMIZATION OF PROCESS PARAMETERS OF EDM OF D3 DIE STEEL WITH BORON CARBIDE(B4C ) ABRASIVE PARTICLES MIXED DIE ELECTRIC FLUID BY GREY RELATIONAL TAGUCHI TECHNIQUE, International Conference at mallaredddy college of Engg.& Tech. Secundrabad, ISBN No.978-93-83038-28-2, pp.156-162, 2015 |
| 13 . |
M.Venkataramana, G.Krishna Mohana Rao, D. Hanumantha Rao, Optimization and Effect of Process parameters on Tool wear in Turning Titanium Alloy under Different Machining Conditions, 1st International Congress on Computers, Electronics and Communication Engineering , ISBN No.10.7763/IPCSIT.2014.V59.16. , pp.87-93, March, 2014 |
| 14 . |
M.Venkataramana, G.Krishna Mohana Rao, D. Hanumantha Rao, Selection of Optimum Process Parameters for Improving Material Removal Rate in Turning of Titanium Alloy under Different Machining Environments, International Conference on Emerging Technologies in Mechanical Sciences , pp.225-230, December, 2014 |
| 15 . |
M. Venkata Ramana, G. Krishna Mohana Rao, D. Hanumantha Rao, Experimental investigations on machining of titanium alloy under different machining environments, Recent Advances in Mechanical Engineering Applications, ISBN No.978-960-474-345-2, pp.137-145, October, 2013 |
| 16 . |
S R ChandraMouli, G.Krishna Mohana Rao, Design Aspects for Developing spatial kinematics of a flexible manipulator arm, International conference on Design, Analysis, Manufacturing and Simulation, pp.512-517, March, 2013 |
| 17 . |
Padmini R, P Vamsi Krishna, G. Krishna Mohana Rao, RR Srikant, Experimental Evaluation of vegetable oil based nanofluids in turning of AISI1040 steel, AMPCO-2012, 2013 |
| 18 . |
Padmini R, P Vamsi Krishna, G. Krishna Mohana Rao, RR Srikant, Vegetable oil based nano solid lubricants for sustainable manufacturing, International Conference on Industrial Engineering ICIE 2013, Nov ’20th to 22nd SVNIT, pp.21-25, 2013 |
| 19 . |
J. Anjaneyulu, G. Krishna Mohana Rao, G. Venkata Rao, Analysis and vibration behaviour of a medium voltage spring operated switch gear mechanism used for circuit breaker, 1st International Conference on Machines and Mechanisms (iNacomm 2013), pp.972-979, Indian Institute of Technology, Roorkee, December, 2013 |
| 20 . |
M.Venkata Ramana, G.Krishna Mohana Rao, D. Hanumantha Rao, Effect of Process parameters on Surface Roughness in Turning of Titanium Alloy under Different Conditions of Lubrication, Ist International Conference on Mechanical and Robotics Engineering, ISBN No.978-1-61804-185-2, pp.83-91, World Scientific and Engineering Academy and Society, May, 2013 |
| 21 . |
M.Venkataramana, G.Krishna Mohana Rao, D. Hanumantha Rao, Effect of Process Parameters on Surface Roughness in Turning of Titanium Alloy under Different Conditions of Lubrication, 4th European International Conference on Recent advances in Mechanical Engineering Applications , ISBN No.978-960-474-345-2, pp.137-145, October, 2013 |
| 22 . |
G. Krishna Mohana Rao, P. Prasanna, B. Anjaneya Prasad, Experimental Comparison of the Mig and Friction Stir Welding Processes for AA6061 (Al Mg Si Cu) Aluminium Alloy, 11th International Conference on Advances and Trends in Engineering Materials and their Applications (AES-ATEMA-2012), August, 2012 |
| 23 . |
P.Ravi Kumar*,Dr.G.Krishna Mohana Rao, Dr.M.Ramalinga Reddy, D.Ajay , Tool wear in Milling process- A Review, International Conference on Materials Processing and Characterization (ICMPC2012), pp.203-207, Gokaraju Rangaraju Institute of Engineering and Technology, Hyderabad,India , March, 2012 |
| 24 . |
M Venkata Ramana, G V Surekha, A Venkata VIshnu, G Krishna Mohana Rao & D hanumantha Rao, Optimization and effect of process prameters on tool wear in turning of titanium alloy under different lubricant conditions, Int Conf on Materials Processing and Characterization, Vol No.1, pp.154-167, March, 2012 |
| 25 . |
G. Rangajanardhan, G. Krishna Mohana Rao, Rafiq Ahmad, KIM S KUN, Characterization of Electric Dicharge Machined Surface of Ti6Al4V, Proceedings of International Symposium on Advanced materials and Processing, Basaveshwar College, Bagalkot, Karnataka, October, 2007 |
| 26 . |
B.Surekha, Pandu R Vundavalli, D Hanumantha Rao & G Krishna Mohana Rao, Experimental Investigation and Multiple Linear Regression of Chromite-Based Resin Bonded Sand System, Int. Conf. on Materials Processing and characterisation, pp.281-287, 2012 |
| 27 . |
G.Krishna Mohana Rao, Ravi Kumar, P. & Sowmya, Surface roughness Optimization in end Milling Operation with damper Inserted end Milling Cutters, Int Conf on Aerospace, Mechanical, Automotive and Materials engg, Vol No.70, pp.884-889, World Academy of Science, engg and technology, 2012 |
| 28 . |
G.Krishna Mohana Rao, Ravi Kumar, P. & Sowmya, Influence of cutting Speed and Type of Damping Insert on the Roughness of Surface Produced by Damper Inserted end Mill Cutter, Latest Trends in environmental and Manufacturing Engineering, ISBN No.978-1-61804-135-7, pp.27-32, WSEAS |
| 29 . |
G.Krishna Mohana Rao, Ravi Kumar, P., Surface Roughness Analysis in Milling, Vol No.59, pp.2939-2946, World Academy of Science, engg and technology, 2011 |
| 30 . |
Ravi Kumar P, G Krishna Mohana Rao, M ramalinga Reddy & G Kavitha Reddy, A Review on energy Saving During Milling Process, Recent Advances and Challenges in Energy-2012, ISBN No.0974-5904, pp.46-50, Int J of Earth Sciences and Engineering, 2012 |
| 31 . |
S R Chandramouli & G Krishna Mohana Rao, An pproach to develop Hyper Redundant Robot Arm Kinematics, 4th Int & 25th All India Manuf Tech, Design and research Conference (AIMTDR 2012), Vol No.2, pp.906-909, AIMTDR, 2012 |
| 32 . |
J Anjaneyulu, G Venkata Rao & G Krishna Mohana Rao, Multibody Dynamic Analysis of Spring Operated Mechanism of SF-6 switch gear and its validation, ICAMB2012, pp.227-235, SMBS, Vellore University, India, 2012 |
| 33 . |
M Venkata Ramana, A Venkatavishnu, G Krishna Mohana Rao & D Hanumantha Rao, Optimization of process parameters and experimental investigation for material removal rate in turning of titanium alloy under different cooling conditions, Int Conf on Futuristic Trends in Materials and Energy Systems, pp.120-132, VR Sidhartha Engg College , Vijayawada, India, 2011 |
| 34 . |
M Venkata Ramana, G Krishna Mohana Rao & A swarnendra Goud, Experimental Investigations and optimization of process parameters in turning of 6351 Aluminium alloy with Dry, flooded and Minimum quantity lubrication (MQL) conditions on cutting forces and chip morphology, First Int Conf on Sunrise Technologies- i COST 2011, pp.375-382, 2011 |
| 35 . |
B Sreenivasulu, M ramesh Kumar, M Jayalakshmi & G Krishna Mohana Rao, Experimental Investigation of optimal machining parameters in die sinking electro dischage machining of 15CDV6, Int Conf on Global Manufacturing and Innovation, pp.1-8, 2006 |
| 36 . |
G Krishna Mohana Rao, S Satyanarayana & M Praveen, Influence of machining parameters on electric discharge machining of maraging steels- An experimental investigation, World Congress on Engineering, ISBN No.978-988-17012-3-7, Vol No.2, Int Assoc of engineers, 2008 |
| 37 . |
Jayalakshmi R, G Krishna Mohana Rao, M ramesh Kumar, B srinivasulu & G Ranga Janardhana, Experimental Investigation of Optimal Machining Parameters of Wire-Cut EDM on Titanium Alloy(T31), Int Conf on Manuf Sci and Tech, pp.185-188, Melaka University, Malaysia, 2006 |
| 38 . |
Eswara Prasad Koorapati, Sriram Venkatesh, G Krishna Mohana Rao & R Murali Krishna , Three Dimensional Contact Analysis of the Burnishing Process- A Finite Element Approach, ICETAETS2008, pp.589-595, 2008 |
| 39 . |
G KRishna Mohana Rao, Subba Rao & P Prasanna, Development of Mathematical Model for Friction Stir Welding of 304L stainless steel, 2nd IEEE Int Conf on Computer Science and Information Technology(ICCSIT2009), pp.221, IACSIT, 2009 |
| 40 . |
G Krishna Mohana Rao, To, Int Symposium on Adv Materials and Processing, Basweswar Engg College , Bagalkot, Karnataka, India, 2007 |
| 41 . |
G Krishna Mohana Rao, Experimental Investigation of Optimal Machining Parameters on Die Sinking EDM for Titanium Alloy(Ti-6Al-4V), 4th Assuit Univ Int Conf on Mech Engg Adv Tech for Industrial Production, Assuit University , Egypt, 2006 |
| 42 . |
M Ramesh Kumar, R Jayalakshmi, B Sreenivasulu & G Krishna Mohana Rao, Experimental Investigation of Optimal Machining Parameters on Die Sinking Electro Dischage Machining of AluminiumAlloy(HE15), AMPC2006, 2006 |
| 43 . |
G.Krishna Mohana Rao, Experimental Analysis of Passive Damping Technique on Conventional Radial Drilling Machine Tool Bed Using Composite Materials, 2nd International Conference on Mechanical and Materials Engineering, ISBN No.978-93-82242-27-7, pp.93-96, International scientific Academy of Engineering and Technology, 2013 |
| 44 . |
Mojtaba Gholamian, G.Krishna Mohana Rao, Panitapu Bhramara, Effect of Inlet on Efficiency and Flow Pattern in Centrifugal Fan using CFD Analysis and Experimental Validation, Ist International COnference on Mechanical and Robotics Engineering, ISBN No.978-1-61804-185-2, pp.37-44, World Scientific and Engineering Academy and Society, 2013 |
| 45 . |
P.Ravi Kumar, G.Krishna Mohana Rao, K.C. Sudha Rani, Non Linear Static and Dynamic Analysis of End Milling Cutter with Multiple Fingers, Ist International COnference on Mechanical and Robotics Engineering, ISBN No.978-1-61804-185-2, pp.73-82, World Scientific and Engineering Academy and Society, 2013 |
| 46 . |
A.Lakshminarayana, G.Krishna Mohana Rao, R.Vijaya Kumar, Effect of Plate Aspect Ratio on BUckling strength of Rectangular Composite Plate with Square/Rectangular Cutout Subjected to Various Linearly Varying In-Plane Loading Using FEM, 1st International Conference on Mechanical and Robotics Engineering, ISBN No.978-1-61804-185-2, pp.92-99, World Scientific and Engineering Academy and Society, 2013 |
| 47 . |
G.Krishna Mohana Rao. Padmini R, Vamsi Krishna P, Performance Evaluation of Eco-Friendly Nanofluids in Machining, Ist International COnference on Mechanical and Robotics Engineering, ISBN No.978-1-61804-185-2, pp.221-229, World Scientific and Engineering Academy and Society, 2013 |
| 48 . |
Surekha Benguluri, Hanumantha Rao Dharwada, Krishna Mohana Rao Gurram, Pandu Ranga Vundavalli, Experimental Studies on Properties of Chromite based Resin Bonded Sand System, Ist International COnference on Mechanical and Robotics Engineering, ISBN No.978-1-61804-185-2, pp.230-238, World Scientific and Engineering Academy and Society, 2013 |
| National Conference |
| 1 . |
J.Anjaneyulu, G. Krishna Mohana Rao, G. Venkata Rao, S. Sreekanth, Stress analysis of high speed mechanism of a 69 KV-SF6 switch gear, 5th National Conference on Advances In Mechanical Engineering (AIM-2015), pp.41-45, Vasavi College of Engineering, Hyderabad, May, 2015 |
| 2 . |
S R ChandraMouli, G.Krishna Mohana Rao, Investigation and Simulation of 2R and 3R Robot Manpulator Kinematics and Trajectory Planning, IEEE National Conference on Recent Advances in Mechanical Engineering(RAME-2014), pp.171-183, Saveetha University, Chennai, Febreury, 2014 |
| 3 . |
Rajendra.M, G. Krishna Mohana Rao, ANALYSIS OF THE INLUENCE OF THE Al2O3 ABRASIVE PARTICLES IN THE DIE ELECTRIC FLUID ON THE PERFORMANCE OF DIE SINKING EDM BY GREY RELATIONAL TAGUCHI TECHNIQUE, National Conference at QIS college of Engg.& Tech. Ongole(AP), pp.6-12, 2014 |
| 4 . |
P. Ravi Kumar, Dr.G.Krishna Mohana Rao, D.Ajay ,M.Sarat Chandra, Experimental evaluation of Tool wear in Milling, 4th National Conference on Advances in Mechanical Engineering (AIM 2013), ISBN No.978-93-82570-16-5, Vasavi College of Engineering, Ibrahimbagh, Hyderabad, A.P., India , November, 2013 |
| 5 . |
P.Ravi Kumar*, Dr.G.Krishna Mohana Rao, D.Ajay, Surface finish comparison for different metals in milling, National Conference on role of civil and mechanical engineer in the development of society (RCMS 2K13) , pp.62-67, Malla Reddy Engineering College, Maisammaguda, Secunderabad, A.P, September, 2013 |
| 6 . |
J.Anjaneyulu, G. Krishna Mohana Rao, G. Venkata Rao, T.R.Rao, M. Prudvi Pande, Analysis of scaled down model of switch gear mechanism, 4th National Conference on Advances In Mechanical Engineering (AIM-2013), pp.80-85, Vasavi College of Engineering, Hyderabad, November, 2013 |
| 7 . |
J. Anjaneyulu, G. Krishna Mohana Rao, G. Venkata Rao,A.Srinivas, The RRR-robot manipulator end effecter path control by considering their links’ flexibility, National Conference on Advances In Mechanical Engineering (AIM-2012), pp.150-154, Vasavi College of Engineering, Hyderabad, October, 2012 |
| 8 . |
J. Anjaneyulu, G. Krishna Mohana Rao, G. Venkata Rao, Dynamic modeling of flexible-link flexible-joint manipulators, National Conference on Advances In Mechanical Engineering (AIME-2012), pp.123-126, KITS College of Engineering, Huzrabad, 2012 |
| 9 . |
P.Ravi Kumar, G.Krishna Mohana Rao, M Ramalinga Reddy & G Kavitha Reddy, A Review on Tool Breakage detection system in Milling Process, National Conf on Advances in Mech Engg, ISBN No.978-81-906270-9-2, pp.146, Sona College of Technology ,Salem,Tamilnadu , August, 2011 |
| 10 . |
P.Ravi Kumar, G.Krishna Mohana Rao, M Ramalinga Reddy & G Kavitha Reddy, A Review on surface roughness in milling process, National Conf on Latest trends in Mech Engg, pp.127-134, Vignan Institute Of Technology and sciences, Hyderabad , August, 2011 |
| 11 . |
P.Srinivasulu, Dr. G. Krishnamohana Rao, PVV Raja Rao & S.Srinivasa Rao , A Review on micro Structure of friction stir welded Titanium alloys, National Conference On INNOVATIONS IN MECHANICAL ENGINEERING, IME’ , pp.363-366, J.T. MahaJan College of Engineering, Faizpur, January, 2010 |
| 12 . |
P.Ravi Kumar*, Dr.G.Krishna Mohana Rao,Dr.N.N.Ramesh, Modelling and chatter control in Milling, National Conference On State of the Art of The Technologies in Mechanical Engineering (NCSAME-2009) , August, 2009 |
| 13 . |
M Venkata Ramana, G Krishna Mohana Rao & D Hanumantha Rao, Machinability of Titanium Alloys- A Review, National Conference on the state of the art of technologies in mechanical engineering, August, 2009 |
| 14 . |
Mr. B V S Rao, Dr. G. Chandra Mohan Reddy, Dr. G. Krishna Mohan Rao, Experimental Investigation on Deep Drawing Operation by using Fem Approach, AVC College of Engineering, Mannampandal, Maylladuthurai (TN) |
| 15 . |
P.Ravi Kumar, G.Krishna Mohana Rao, M Ramalinga Reddy & G Kavitha Reddy, A Review on energy Saving During Milling Process |
| 16 . |
P.Ravi Kumar, G.Krishna Mohana Rao, Modelling and Chatter control in Milling: A Review, Nat Conf on State of the Art of Technologies in Mechanical Engineering(NCSAME2009), JNTU Hyderabad, 2009 |
| 17 . |
J Anjaneyulu, G Venkata Rao & G Krishna Mohana Rao, Free Vibration Analysis of a planar four bar flexible mechanism, Nat conf on Advances in Mechanical engineering(AIM2010), pp.65-76, Vasavi College of Engg, 2010 |
| 18 . |
P srinivasulu, G Krishna Mohana Rao, S Srinivasa Rao & PVV raja Rao, Friction Stir Welding Process- A Novel Joining Technique, Nat conf on Recent Advances in Mech Engg(RAIME'10), National engg College , Kovilpatti, TN, India, 2010 |
| 19 . |
K Eswara Prasad, G Krishna Mohana rao & M chittibabu, The effect of Process parameters on surface roughness using electric discharge machining, Nat Conf on Trends in Mech Engg:Time2003, pp.269-271, NIT,Warangal,India, 2003 |
| 20 . |
G Krishna Mohana Rao, Genetic Algorithm-An Overview |
| 21 . |
M T Naik & G Krishna Mohana rao, Effect of Welding and Heat Treatment on Cast Iron, pp.93-97 |
| 22 . |
G Krishna Mohana Rao & KSS Murthy, Effect of Heat Input and Percentage of CO2 in Sheilding gas on the Strength aspects of flux cored arc weld metal, pp.270-272 |
| 23 . |
G Krishna Mohana Rao & KSS Murthy, Studies on the Influence of Various Factors on The Mechanical Properties of flux cored arc weldment, Seventeenth Nat Conv of Mech engg and All India Seminar on Future Trends in Mech Engg, Research and Devolopment, University of Roorkee, 2000 |
| 24 . |
K Eswara Prasad, P ravinder, M manzoor Hussain, G Krishna Mohana Rao, M Indiara rani, Neural Network Methods for optimizing the Burnishing Process Parameters using Genetic Algorithm, Nat Conf on State of the Art of Technologies in Mechanical Engineering(NCSAME2009), pp.276-279, JNTU Hyderabad, 2004 |
| 25 . |
B Sreenivasulu &G Krishna Mohana Rao, Experimental Investigation of Optimal Machining Parameters in die Sinking Electro Dischage Machining of Miraging Steels(M250), Nat Conf n Adv in Mech Engg, pp.1-6, Engg College Kota, Kota, India, 2006 |
| |
| Workshop |
| 25 . |
B Karuna Kumar, G rajasekhar & G Krishna Mohana rao, The Fuzzy front end- An area of extrordinary oppurtunity, National seminar& Academia-Industry Interface, pp.1-14, MM Educational Trust, Ambala, Haryana |
| 25 . |
B Karuna Kumar, G rajasekhar & G Krishna Mohana rao, Dry Machining, National seminar& Academia-Industry Interface, pp.1-8, MM Educational Trust, Ambala, Haryana |
Events Participated/Organized
| Organized |
| 1.
|
Organized a Tutorial on GNU/LINUX Internals, JNTUHCEH, 01-08-2011 to 10-08-2011 |
| 2.
|
Organized a Workshop on Power Tools in Modern Workshop Practice, MED, JNTUCEH, 27-09-2005 |
| Presented |
| 1. |
Presented a paper in International Conference on Applied Science, Fukuoka, Japan, 01-02-2016 to 03-03-2016 |
| 2. |
Presented a paper in Effect of Inlet on Efficiency and Flow Pattern in Centrifugal Fan using CFD Analysis and Experimental Validation, Athens, Greece, 14-05-2013 to 16-05-2013 |
| 3. |
Presented a paper in Non Linear Static and Dynamic Analysis of End Milling Cutter with Multiple Fingers, Athens, Greece, 14-05-2013 to 16-05-2013 |
| 4. |
Presented a paper in Effect of Process parameters on Surface Roughness in Turning of Titanium Alloy under Different Conditions of Lubrication, Athens, Greece, 14-05-2013 to 16-05-2013 |
| 5. |
Presented a paper in Effect of Plate Aspect Ratio on BUckling strength of Rectangular Composite Plate with Square/Rectangular Cutout Subjected to Various Linearly Varying In-Plane Loading Using FEM, Athens, Greece, 14-05-2013 to 16-05-2013 |
| 6. |
Presented a paper in Performance Evaluation of Eco-Friendly Nanofluids in Machining, Athens, Greece, 14-05-2013 to 16-05-2013 |
| 7. |
Presented a paper in Experimental Studies on Properties of Chromite based Resin Bonded Sand System, Athens, Greece, 14-05-2013 to 16-05-2013 |
| 8. |
Presented a paper in Experimental Analysis of Passive Damping Technique on Conventional Radial Drilling Machine Tool Bed Using Composite Materials, Pattaya, Thailand, 23-04-2013 to 24-04-2013 |
| 9. |
Presented a paper in 5th WSEAS Int Conf on Manuf Engg, Quality and Production Systems, Vienna, Austria, 10-11-2012 to 12-11-2012 |
| 10. |
Presented a paper in Int Conf on Aerospace, Mechanical, Automotive and Materials Engineering, Lucerne, Switzerland, 15-10-2012 to 16-10-2012 |
| 11. |
Presented a paper in International Conference on Mchanical and Aerospace Engineering, Venice, Italy, 28-11-2011 to 30-11-2011 |
| 12. |
Presented a paper in International Conference on Mechanical and Electrical Technology, Beijing, China, 08-08-2009 to 11-08-2009 |
| 13. |
Presented a paper in International Conference of Mechanical Engineers, IAENG, London, UK, 02-07-2008 to 04-07-2008 |
| 14. |
Presented a paper in International Conference on Emerging Technologies & Applications in Engineering, Technology & Sciences, Saurashtra University, Rajkot, India, 13-01-2008 to 14-01-2008 |
| 15. |
Presented a paper in International Symposium on Advanced Materials and Processing, Bagalkot, Karnataka, India, 29-10-2007 to 30-10-2007 |
| 16. |
Presented a paper in Fourth Assiut University Int. Conf. on Mech Engg. and Advanced Tech. for Indus. Prod., Assiut, Egypt, 12-12-2006 to 14-12-2006 |
| 17. |
Presented a paper in International Conference on Manufacturing Science and Technology, Melaka, Malaysia, 28-08-2006 to 30-08-2006 |
| 18. |
Presented a paper in International Conference on Global Manufacturing and Innovation, CIT, Coimbatore, India, 27-07-2006 to 29-07-2006 |
| 19. |
Presented a paper in National Conference on State of the Art of Technologies in Mechanical engineering, MED, JNTUHCEH, 29-06-2004 to 30-06-2004 |
| 20. |
Presented a paper in National Seminar & Academia Industry Interface, M.M. Group of Institutions, Mullana, 14-03-2003 to 16-03-2003 |
| 21. |
Presented a paper in National Conference on Recent Trends in CAD/CAM, JNTUCEK, 30-03-2002 |
| Participated |
| 1. |
Participated in a Workshop on Train the Trainees on Examination Reforms, KLE Technological University, Hubbali, Karnataka, 09-01-2020 to 11-01-2020 |
| 2. |
Participated in a Workshop on NBA Accreditation(SAR Filling and Preparedness for Assessment), JNTUHCEH, 14-12-2017 to 16-12-2017 |
| 3. |
Participated in a Refresher Course on Genetic Algorithms for Engineering Applications, IIT Kanpur, 26-04-2006 to 29-04-2006 |
| 4. |
Participated in a Refresher Course on Nano Technology and its Applications, MED, JNTUHCEH, 13-12-2004 to 26-12-2004 |
| 5. |
Participated in a Refresher Course on Advanced Production Systems, ASC, JNTU, 17-11-2003 to 06-12-2003 |
| 6. |
Participated in a Refresher Course on Comprehencive CNC Turning/CNC Milling, MTAB,Chennai, 28-07-2003 to 01-08-2003 |
| 7. |
Participated in a Refresher Course on 3rd Serc School on Precision Engineering, IIT Kanpur, 10-06-2002 to 19-06-2002 |
| 8. |
Participated in a Refresher Course on Computer Applications in Manufacturing Technology, Osmania University, 27-05-2002 to 01-06-2002 |
| 9. |
Participated in a Refresher Course on Design for Manufacturability and Production Drawing Practices, JNTUCEH, 26-12-2001 to 30-12-2001 |
| 10. |
Participated in a Refresher Course on Java and Advanced Java, ASC, JNTU, 06-04-2001 to 02-05-2001 |
| 11. |
Participated in a Refresher Course on Metal Forming Modelling Techniques, IIT Kanpur, 10-07-2000 to 21-07-2000 |
| 12. |
Participated in a Refresher Course on Web and E-Commerce technologies, JNTUCEK, 22-05-2000 to 10-06-2000 |
| 13. |
Participated in a Refresher Course on Design for Manufacturability, NIT Warangal, 27-12-1999 to 08-01-2000 |
| 14. |
Participated in a Refresher Course on Pumping Syatems-Selections, Performance, Testing and Latest Advances, SGSITS, Indore, 29-11-1999 to 11-12-1999 |
|
|
Professional Activities
|
|
Life Member of ASME, ISTE and Institution of engineers(I) |
|
|
Teaching
| MEMS in M.tech(Mechatronics) II (I) | | Adv Metal Forming in M.Tech(AMS) II (I) | | Instrumentation and Control Systems in M.Tech(Therm Engg) II (I) | | Special Manufacturing Processes in M.Tech(AMS) II (I) | | Tribology in M.Tech(Machine Design) II (II) | | Theory of Metal Cutting and Tool Design in M.Tech(AMS) I (I) | | hydraulic Machinery and Systems in Mech II (IV) | | Power Plant Engineering in Mech I (IV) | | Instrumentation and Control Systems in Mech I (III) | | Unconventional Machining Processes in Mech II (III) | | Machine Tools in Mech II (III) | | Metrology in Mech I (III) | | EngineeringGraphics in Mech, Metallurgy, ECE, CSE I (I) | | Engineering Mechanics in Mech, Metallurgy I (I) |
|
|
Adminstrative Positions Held
|
1. Officer -in-Charge, Transportation
, JNTU hyderabad, 2011 - Present
|
|
2. Local Institutional Coordinator, Global Initiative of Academic Networks, MHRD, Govt of India
, JNTUH College of Engineering, 2015 - Present
|
|
3. Coordinator, M.tech(AMS)
, JNTU hyderabad, 2002 - 2008
|
|
4. Coordinator, M.tech(Mechatronics)
, JNTU hyderabad, 2012 - 2014
|
|
5. Officer -in-Charge, Work shop
, JNTU hyderabad, 2005 - 2008
|
|
6. Additional Controller of Examinations
, JNTU hyderabad, 2008 - 2010
|
|
7. Co Convener, TS ECET 2021
, JNTU Hyderabad, 2021 - 2021
|
|
8. Co Convener, TS ECET 2020
, JNTU Hyderabad, 2020 - 2020
|
|
9. Chief Regional Coordinator, EAMCET 2015
, JNTUH, 2015 - 2015
|
|
10. Chief Regional Coordinator, EAMCET-2014
, JNTU hyderabad, 2013 - 2014
|
|
11. Deputy Warden of Hostels
, JNTU hyderabad, 1995 - 1996
|
|
12. Coordinator, TDS, TEQIP-I
, JNTU hyderabad
|
|
|
Project/Research Guidance
| Dhoni Nagaraj |
Investigation on effect of Flow Forming Process Parameters on Part Quality using Finite Element Simulation |
2023 |
|
| Eatala Nitheesha |
Experimental Investigations on Performance Characteristics in Turning of A286 Iron Based Nickel Alloy under Different Machining Conditions |
2022 |
|
| Palle Thriveni |
Performance Evaluation of Advanced Tools in Turning of Titanium Grade 5 Alloy |
2022 |
|
| K Sri Sindhu |
Design and Analysis of Automatic Grass Cutting Robotic Vehicle |
2022 |
|
| B Karthik |
Optimization of Material removal rate and surface roughness for electric discharge machining of Inconel 625 |
2022 |
|
| Mettu Vivek |
Optimization of material removal rate, KERF loss and surface roughness for Abrasive water jet machining of Inconel 625 |
2022 |
|
| Soumya Boddu |
Deep Drawing of Metal-Polymer-Metal Samdwich Composite |
2021 |
|
| Bhagyalaxmi Gullola |
Spring back and weld line movement characteristics of TWBs in U-Draw bending with counter punch |
2021 |
|
| Bhavana Sree Bhandari |
Effect of Severe Plastic Deformation on Tribological Performance of Aluminium Metal Matrix Composite |
2020 |
|
| Sriharsha T |
Trajectory Planning and Simulation of 6DOF Robot for In-pipe inspection and development of 3DOF Robot for Testing |
2019 |
|
| Sri Ramoji Sreeja |
Effect of Annealing of Preform on the Mechanical Properties of Flow Formed Aluminium Alloy 6061 Tubes |
2019 |
|
| Shubham Joshi |
Tolerance Analysis on a Mechanical Assembly – Universal Joint |
2019 |
|
| Bharat Varma MV |
Design, Implementation and Optimization of Electronic Component Chassis by using DFM |
2019 |
|
| Vipul Kumar M |
Experimental Investigation of Mechanical Properties of Kevlar Fibers in Different Orientation |
2019 |
|
| Uday Kumar P |
Optimization of Process Parameters in Electric Discharge Machining of AA2014 |
2018 |
|
| Shiva Kiran Kumar G |
Parametric Optimization of Abrasive Water Jet Machining using Taguchi Grey Relational Analysis and Response Surface Methodology |
2018 |
|
| Harshavardhan Reddy M |
Investigation of process parameters in machining of Blind Pockets on Maraging Steel(MDN250) through Abrasive Water Jet Machining |
2018 |
|
| Vandana P |
Reduction of Lower Elongation in Alloy Steel Plates(S387 Gr 12C12) Weld Joints |
2018 |
|
| Ramachandra Reddy P |
Parametric Optimization of Drilling Process on Glass Fiber Reinforced Polymer for Improved Surface Finish and reduced Delamination using Taguchi Grey method |
2017 |
|
| Poojitha K |
Optimization of process parameters for spinning of pure Copper using Taguchi methodology and Regression |
2016 |
|
| Sai Gayatri Lahari P |
Optimization of process parameters in Abrasive Water Jet Cutting of AA2014 and Ti-6Al-4V |
2016 |
|
| Grace Prashanthi Kondra |
Optimization of Striker Flange and Percussion Cap of a primer in Super rapid gun mount (SRGM) ammunition |
2016 |
|
| K S Narayana Vanapalli |
Hot Stamping Process Design for an Automotive Part |
2016 |
|
| Nimma Sameer |
Anaylsis, Development and Manufacturing of End Mill for Deep Pocket Milling |
2016 |
|
| SreeVidya Guru |
Influence of pinprofile on peak temperature and heat generated in friction stir welding of AA7068- Finite Element Modelling |
2016 |
|
| Pragnya T |
Experimental analysis of friction stir welding of similar plates of AA5251 |
2016 |
|
| Nayana M |
Experimental Analysis of Friction Stir Welded Joints of AA 7079-Copper CZ101 |
2016 |
|
| D.Balakrishna |
Design and Manufacturing of Position Gauge for Nozzle Support |
2015 |
|
| Santosh Kumar T |
Optimization of surface roughness and material removal rate on cryogenically treated solid carbide end mill by grey relational taguchi technique |
2015 |
|
| M Vivekanad |
Design and Analysis of a flapping wing unmanned aerial vehicle |
2015 |
|
| G Keerthana |
Development of Robotic Polishing Process for a 3D Shrouded Impeller |
2015 |
|
| Taraknath De |
Optimum size selection of Interfaces between Canister and Launch Vehicle using Assembly Tolerance Variation Model |
2015 |
|
| Krishna Teja A |
Design and Manufacturing of Mini Milling Machine |
2015 |
|
| K Bhargava Krishna |
Experimental Investigation of SMAW of Stainless Steel 304 and Mild Steel IS2062 |
2015 |
|
| B.Sindhu |
Experimental Evaluation of Friction Stir Welded Joints of Dissimilar Aluminium Alloys |
2015 |
|
| Dineshwedi P |
Experimental Analysis of Friction Stir Welded Joints of AA 2014 and AA 6061 |
2015 |
|
| Aftab Alam |
Experimental Analysis of Friction Stir Welded Joints of Copper and Brass Plates using Coated Tools |
2015 |
|
| Renaldo Dovendra Puran |
Optimization of Process Parameters in the End Milling Process |
2014 |
|
| Bharat Kumar M |
Enhancement of Abrasive Wear Resistance of AA7017 using Friction Stir Processing |
2014 |
|
| Ramu Boga |
Investigation of Tool Life in High Speed Wet Milling of Ti-6Al-4V Alloy |
2014 |
|
| Venkataramana Vasantala |
Wheel Profile Measurement and It's Effect on Transit Operation in Indian Railways |
2013 |
|
| Uday Kumar M |
Effect of Cutting Conditions on Tool Performance in Hard Turning of High Carbon High Chromium Alloy |
2013 |
|
| Sattar Hantosh Abo Soda Alfatlawi |
Simulation of Nanoceramic Composite Matrices with Reinforcements using Finite Element Method |
2013 |
|
| Nitin Rajaram Camble |
Automation of Shearing Process |
2012 |
|
| Chandra Sekhar P |
Experimental Investigation of Machining Parameters in Electric Discharge Machining of High Carbon Alloy |
2012 |
|
| Usha K |
Investigation of Chip Morphology and Surface Roughness in End Milling |
2012 |
|
| Vijay Mohan S |
Experimental Analysis of Passive Damping Techniques on Conventional Radial Drilling Machine Tool Bed Using Composite Materials |
2012 |
|
| K.Srinivasulu |
Performance Evaluation and Selection of Optimal Cutting Conditions in Turning of Ti-6Al-4V Alloy Under Different Cooling Conditions |
2011 |
|
| P.Nagababu |
Charactarisation of Mechanical Properties and Study of Microstructure of Friction Stir Welded Joints of Similar and Dissimilar Alloys of Aluminium |
2011 |
|
| S.srilatha |
Analysis and Optimisation of Process Parameters in Turning f Titanium Alloy under Different Cooling Conditions |
2011 |
|
| Soumaya Jerripotula |
Experimental Evaluation of Frictional Damper Effect on Chatter Supression in a Slender End Mill Tool |
2011 |
|
| Anil Kumar Garikapati |
Experimental Evaluation of Influence of Porosity in Damping of Casting |
2011 |
|
| Raghuramiah SM |
Design and Development of Diametric Extensometer for Lateral Strain MEasurement |
2011 |
|
| K.Sudha Rani |
Analysis of Stresses and Vibrations of End Milling Cutter Employed with Damper in Load and No Load Cases |
2010 |
|
| E.Narayana Yadav |
Design, Analysis and Manufacture of Hydraulic Hoist Mechanism for Gates of Dam and Canal System |
2009 |
|
| Sri Phani Sushma I |
Mechanical Behavior of Single, Two, Three and Four Walled Carbon Nano Tubes Using Finite Element Analysis |
2009 |
|
| Sunitha Vendra |
Experimental Study of the Use of Reconfigurable Tooling for Vacuum Forming Process |
2009 |
|
| M.Siva Kumar |
Estimation of Cost of Quality in Manufacturing Industry |
2008 |
|
| K.Anupama Francy |
Eveluation of Circularity Error by Minimum Zone Method Using Minimax Criterion |
2008 |
|
| S Rafiq Ahmad |
Electrical Discharge Machinig Characteristics of Titanium Alloy |
2007 |
|
| Dara Sudhakar |
Experimental Study of EDM surface of INCONEl718 |
2007 |
|
| M.Praveen |
Effect of EDM Parameters on Maraging Steel |
2007 |
|
| Vivek Chakravarthy |
Stress Reduction in a Gear Tooth Through Parameter Optimization Using Finite Element Analysis |
2006 |
|
| V.Yesu rasada Rao |
Experimental Analysis of Vapor Compression Refrigeration System by Using Refrigerents R-407-C and HCFC-22 |
2006 |
|
| G.V.Rambabu |
Design Methodology of Heat Exchanger for Domestic Thermosyphon Solar Water Heating System |
2005 |
|
| Medasani Ramesh Kumar |
Experimental Investigation of Optimal Machining Parameters on Die Sinking Electro Dischage Machining of Titanium Alloy(Ti-6Al-4V) and Alluminium Alloy(HE-15) |
2005 |
|
| Bh.Lakshmana Babu |
Development of Interactive Generative Computer Aided Process Planning |
2005 |
|
| Ch. Vijay |
Analysis and Improvement of Bumper for a Light Motor Vehicle |
2004 |
|
| T.Venkatesh |
Re-Design amd Manufacturing of Injection Molded Components From Vaccum Formed Components and Evaluation of NEw Design With Plastic Mold Flow Analysis |
2004 |
|
| V.Ananada Rao |
Elasto-Plastic Analysis of Indentation Problem |
2004 |
|
| Sarappa Kumar |
Selection of Lubricants in Wire Drawing Operation by SAP R/3 |
2004 |
|
| D.Govinda Rao |
Role of Cryogenic Cooling on Cutting Temperature and Cost Analysis |
2004 |
|
| K.Niranajan Reddy |
Development of Cell Formation Software Based on Sorting Based Algorithms |
2004 |
|
| Shameer Basha M |
Thermodyanamic Analysis of Air Cooled Gas Turbine Plants |
2004 |
|
| K.Kishore Raju |
Stress Intensification of Fillet Welded T-Joints With Weld Discontinuities Using Finite Element Analysis |
2003 |
|
| K.Venu Gopal Reddy |
An Application of Genetic Algorithms For Solving Job Shop Scheduling Problems |
2003 |
|
| D.Srinivas |
Function Replacing Hybrid for Intelligent Manufacturing |
2003 |
|
| C.Siva Prasada Rao |
ViscoPlastic Finite Analysis of Deep Drawing Process of Alluminium Alloy |
2003 |
|
| M. Sukesh Reddy, Sri Maruti Praharsha, S. Sharath Chandra, B. Rajashekar |
An Experimental Study of 304 and 316 Stainless Steel Friction Stir Welded Blanks |
2023 |
|
| D. Yamini, MD. Maazuddin, S. Shruthi |
Determination of Joint Efficiency and Soundness of Joint by using different Non-Destructive Testing Techniques on Friction Stir Tailor Welded Blanks |
2023 |
|
| L Aravindha Thejashwini, Gayathri Bharadwaj, S Sai Reshwanth |
Study and Analysis of Carbon Fiber Reinforced Alluminium Alloy metal matrix composite |
2022 |
|
| K.Srihitha, E.Preethi, D.Shyamal Kumar |
Design of Footstep Power Generator using Electromagnetic Induction Principle |
2022 |
|
| A.Vishnu Priya, K.Sai Teja, G.Mahalakshmi |
Thermal Analysis and Evaluation of Mechanical Properties of Dissimilar Weldments |
2022 |
|
| R N Divya Sree, Mora Rohith, More Rohith, Mulakala Vijender |
Heat Transfer Analysis of Engine Cylinder Fins of Varying Geometry and Material |
2021 |
|
| Karthik B, Nithin Sai J, Sandeep Kumar B |
Optimization for Surface Roughness and Tool Wear rate of Nylon using CNC turn Mill by Taguchi Method |
2019 |
|
| Harshitha B, Sai Akash Harijee, Prashanth B |
Experimental Anlysis of Surfac eRoughness Produced in CNC Turning of Mild Steel using Taguchi Method |
2019 |
|
| Aravind K, Manish Varma N, Dilip Prasasthya Vidwath, Sirisha T |
Performance Analysis of Brown's Gas Generator |
2018 |
|
| G Jagadeep, A Gopala Krishna |
A Comprehensive study on modelling and fabrication of missile wing |
2017 |
|
| B.Jyothsna, B.Abhijith, J.Avinash Chandra, C.Shashank and B.Sumanth Kumar |
Advancement in Punching Machines |
2016 |
|
| Krishna Teja A, Ravi Kiran B, Suresh D, Jagadish K |
Design and Manufacture of Shaft Drive Transmission System for Motor cycle |
2014 |
|
| Rishank Reddy G, Madhusudhan Reddy V, Devi Prasad B, Rahul A |
Modelliong and CFD Analysis of a Centrifugal Compressor With Vaneless Diffuser and Low Solidity Vaned Diffuser |
2014 |
|
| Trevor Wilfred Speechly, Jagadish Kumar Tamada, Saranya Kunaparaju, Shravani Vallakatla |
Influence of Machining Variables on the Surface Temperature of the Workpiece in Dry Turning of EN31 and Mild Steel |
2013 |
|
| Rajesh B |
Design and Manufacturing of Press Tools for Compressor Shell |
2012 |
|
| Chandrasekhar P, Srinivasa Rao A, Siva Rama Krishna S, Muniraja N |
A Study on Machinability of Al/SiC Metal Matrix Composite Produced by Liquid Metallurgy Technique |
2006 |
|
| Radhika K |
Cost Effective Modification in Plastic Injection Moulding Machine |
2006 |
|
| Balamani V |
A Study on Brazed Joint Leak Reduction in Compressor |
2006 |
|
| Chittibabu M |
An Evaluation of Surface Finish Produced by Electric Discharge Machining |
2002 |
|
| Viswanadh, N., Raju IAN., RaviKumar, P., Ankaiah, Y., Praveen, B., Malleswara Rao, P. |
Design and Finite Element Analysis of IC Engine Piston |
2002 |
|
| Praveena A, Triveni N, Janaki I |
Automation of Metal Sheet Bending Using Programmable Logic Controller |
2002 |
|
| Hadnoor Ashvin Kumar |
Mechanical Characterization of R-Glass Epoxy UD Laminate |
2001 |
|
| Prasanna Babu R |
Study and Performance Analysis of Gas Turbine |
2001 |
|
| Prasad VMK |
Generation of Bio-Gas and Its Utilisation |
1999 |
|
| GGK Murthy, Prabhanjan, K., Narasimham, DSVL., Govind Rajulu, B. |
Re-engineering- A Comprehensive Study |
1996 |
|
| A Lakshmi Narayana |
Analysis of Composite Laminated Plates With and Without Cutout Using Numerical and Experimental Methods |
2019 |
|
| Bhiksha G |
Experimental Investigation on the Influence of Suspended Particles in the Medium of the Electrical Discharge Machining Process |
2018 |
|
| BVS Rao |
Analytical and Experimental evaluation of flange wrinkling in sheet metal forming |
2018 |
|
| Chandra Mouli S R |
Kinematic Modeling, Analysis and Prototype Development of a Continuum Robot |
2018 |
|
| Rajendra Mogre |
Influence of different abrasive particles in the dielectric fluid on the performance of electric discharge machining |
2018 |
|
| P Ravi Kumar |
Parametric study of milling process using enhanced damper in milling cutters |
2017 |
|
| J.ANJANEYULU |
ANALYSIS OF STRESS AND VIBRATIONAL BEHAVIOUR OF HIGH SPEED MECHANISMS UNDER SHORT TERM DYNAMIC LOADING |
2017 |
|
| Ishrat Meera Mirzana |
Mathematical formulations and simulation of functionally graded components |
2017 |
|
| P Srinivasulu |
EVALUATION OF PROPERTIES OF FRICTION STIR WELDED JOINTS OF AA6082 |
2016 |
|
| Afroz Mehar |
Analysis of orthotropic cylindrical shell with helically wound fiber reinforcement subjected to different loading conditions |
2016 |
|
| Padmini R |
PERFORMANCE ASSESSMENT OF VEGETABLE OIL BASED NANO CUTTING FLUIDS IN TURNING AISI 1040 STEEL |
2016 |
|
| B Surekha |
Experimental Investigations and Design of Fuzzy Logic based Expert System for Resin Bonded Sand Mould Systems |
2015 |
|
| Mojtaba Gholamian |
Flow Pattern and Performance Analysis of Squirrel-Cage Fans for Different Inlet Parameters, using Experimental and Numerical Methods |
2015 |
|
| M.Venkata Ramana |
Optimization and Investigation in to the effect of cutting conditions in machining of Ti-6Al-4v under Dry, Flooded and Minimum Quantity Lubrication conditions |
2015 |
|
Consultancy
Involved in the tractor trailer design of AP Transport department and testing of structures in Malaysian Township
Countries/Foreign Universities Visited
| 1.
|
University of Venna,
Vienna, Austria
, 10-11-2012 to 12-11-2012 To take part in an International conference |
| 2.
|
Melaka University,
Melaka, Malaysia
, 28-08-2006 to 30-08-2006 To take part in an International conference |
| 3.
|
Assiut University,
Assuit, Egypt
, 12-12-2006 to 14-12-2006 To take part in an International conference |
|
|
|
|
| Contact : |
 |
|
Dr. G. Krishna Mohana Rao
Senior Professor & Director of Innovative Learning & Teaching, JNTUH
Mechanical Engineering
JNTUH University College of Engineering , Science & Technology Hyderabad
Official Email: kmrgurram@gmail.com
Alternate Email: kmrgurram@gmail.com
|
| |
| |
